Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LAN9353/PT by Microchip is an Ethernet transceiver IC with 64 terminals in a square package. Operating at -40 to 85°C, it has a supply voltage of 3.3V and matte tin finish. Ideal for telecom applications, it offers a terminal pitch of 0.5mm and is TS 16949 compliant.
Median Price
$8.040
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$6.100
1k+ parts
$5.630
10k+ parts
$5.330
Nova Conductors
$7.110
-
NAC Semi
$7.620
$6.910
$6.320
Vyrian
Aztec Data Supply Inc.
$6.650
Ampacity Inc.
$6.830
Continental Prestige Electronics
$6.968
Netroflash
$6.755
$6.612
Corohmni
$7.289
Advanced Electronics
$7.959
$7.322
$6.861
AZTECH Wire
$13.330
Lixinc
Fulton Briggs Corp.
Argo Parts USA
This material provides good protection for the IC, making it durable and reliable in various operating conditions.
Facilitates easy and efficient PCB assembly, saving time and effort during production.
Ensures high quality and reliability in automotive applications, meeting stringent industry standards.
Optimal design for space-saving and efficient PCB layout, making it suitable for compact devices.
Provides versatility in connectivity options and compatibility with various system configurations.
Allows for reliable performance in a wide range of temperature environments, making it suitable for industrial applications.
Operates efficiently within standard voltage range, ensuring compatibility with common power sources.
Fine pitch design enables high-density mounting, saving space on the PCB and facilitating compact device designs.
Telecom - Switching ICs LAN9353/PT attributes and parameters. Explore more Telecom - Switching ICs devices from Microchip Technology
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LAN9353/PT Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - MBB/Label Chgs 16/Nov/2018
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Excel (Suzhou) Semiconductor
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Fairchild Semiconductor
General Instrument
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
BCM56784A0KFSBG
Broadcom
ETHERNET SWITCH; Terminal Form: BALL; No. of Terminals: 3315; Package Code: BGA; Package Shape: SQUARE; Maximum Operating Temperature: 70 Cel;
KSZ8993ML
Microchip Technology's KSZ8993ML is an Ethernet switch IC with 128 terminals in a rectangular flatpack package. Operating temperature range of 0-70°C, nominal voltage of 1.8V, and terminal pitch of 0.5mm make it ideal for telecom switching applications.
IDT72V70200BCG
Renesas Electronics
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE;
ZL50023QCG1
Microchip Technology's ZL50023QCG1 is a Telecom IC with 256 terminals, operating from -40 to 85°C. It features a low profile flatpack package with Gull Wing terminals and requires 130mA supply current at 1.8V. Ideal for digital time switching applications in the telecom industry.
IDT72V73263DRG
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
72V8981JG
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
PEF20450MTSI
Infineon Technologies
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
LAN9352T/PT
LAN9352T/PT by Microchip Technology is an Ethernet transceiver IC with 80 terminals in a square package. Operating temperature range of 0-70°C, suitable for telecom applications. Features Gull Wing terminals, 3.3V supply voltage, and TS16949 screening level.
IDT72V73250DAG
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8794CNXCC-TR
Microchip Technology's KSZ8794CNXCC-TR is a 64-terminal Ethernet switch IC with CMOS technology. Operating temp range of 0-70°C, package style in chip carrier form. Ideal for telecom applications requiring TS 16949 screening level and low-profile design.
KSZ8565RTXV-VAO
KSZ8565RTXV-VAO by Microchip Technology is an Ethernet switch telecom IC with a square package and 128 terminals. It operates in industrial temperature range (-40 to 105 °C) and has a nominal voltage of 1.2 V. This IC is suitable for various switching applications in the telecom industry.
KSZ8895FQXC
Microchip Technology's KSZ8895FQXC is an Ethernet switch IC with 128 terminals in a rectangular flatpack package. Operating temperature range of 0-70°C, suitable for telecom applications. Features include matte tin terminal finish, 1.2V supply voltage, and TS16949 screening level.
PEB2045-N
DIGITAL TIME SWITCH; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
72V70800PFG
DIGITAL TIME SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE;
IDT72V8985JG
LAN9355/PT
LAN9355/PT by Microchip is an Ethernet switch IC with 80 terminals, operating temp of 0-70°C. It features a plastic package, Gull Wing terminals, and 1.2V supply voltage. Ideal for telecom applications requiring high-speed data switching in compact designs.
IDT72V70210DAG8
BCM53115MKPBG
BCM53115MKPBG by Broadcom is a Telecom IC for Ethernet transceiver applications. It operates at 0-70°C with a supply voltage of 1.2V, utilizing CMOS technology. The package is a square grid array measuring 23x23mm with 484 terminals in plastic/epoxy material.
IDT72V70800PFG8
Integrated Device Technology
KSZ8567RTXI
Microchip Technology's KSZ8567RTXI is an Ethernet switch IC with 128 terminals, operating from -40 to 85°C. It features a matte tin finish, quad terminal position, and thin profile flatpack package style. Ideal for telecom applications requiring high-speed data switching in industrial environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LAN9303I-ABZJ
LAN9303I-ABZJ by Microchip Technology is an Ethernet switch IC with 56 terminals, operating at -40 to 85°C. It features a 3.3V supply voltage, matte tin finish, and quad terminal position. Ideal for telecom applications requiring a compact chip carrier package with a very thin profile.
LAN9303I-ABZJ-TR
LAN9303I-ABZJ-TR by Microchip Technology is an Ethernet switch IC with 56 terminals, operating b/w -40 to 85°C. It features a 3.3V supply voltage, matte tin finish, and quad terminal position. Ideal for telecom applications due to its TS 16949 screening level and compact square package style.
LAN9303-ABZJ
LAN9303-ABZJ by Microchip is a 56-terminal Ethernet switch IC with TS 16949 screening. Operating at 0-70°C, it has a nominal voltage of 3.3V and terminal pitch of 0.5mm. Ideal for telecom applications, this chip carrier package features a very thin profile and matte tin finish.
LAN9303M-AKZE
ETHERNET SWITCH; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
LAN9353I/PT
LAN9353I/PT by Microchip is an Ethernet transceiver IC with 64 terminals, operating at -40 to 85°C. It features a 3.3V supply voltage, matte tin finish, and quad terminal position. Ideal for telecom applications requiring high-speed data transmission in industrial environments.
LAN9355I/PT
ETHERNET SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: HTFQFP; Package Shape: SQUARE;
LAN9303MI-AKZE
LAN9303MI-AKZE by Microchip Technology is an Ethernet switch IC with 72 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 0.5mm, suitable for telecom applications requiring TS 16949 screening level. The package style includes chip carrier and heat sink/slug in a square shape, making it ideal for compact industrial designs.
LAN9354I/ML
LAN9354I/ML by Microchip is an Ethernet switch IC with 56 terminals in a square chip carrier package. Operating from -40 to 85°C, it has a supply voltage of 3.3V and peak reflow temp of 260°C. Ideal for telecom applications requiring high-speed switching capabilities.
LAN9303-ABZJ-TR
LAN9303-ABZJ-TR by Microchip is a 56-terminal Ethernet switch IC with 3.3V supply voltage, operating b/w 0 to 70°C. It features TS16949 screening level, square package shape, and quad terminal position. Ideal for telecom applications requiring a very thin profile chip carrier with no lead terminals.
LAN9354TI/ML
ETHERNET SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
LAN9353I/ML
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
LAN9303M-AKZE-CAG
LAN9354/ML
ETHERNET SWITCH; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
LAN9354T/ML
LAN9354T/ML by Microchip Tech is a 56-terminal Ethernet switch IC with 3.3V supply voltage, operating from 0 to 70°C. It features TS16949 screening, matte tin finish, and quad terminal position. Ideal for telecom applications requiring a compact square chip carrier package with very thin profile and no-lead terminals.
LAN9353/ML
LAN9353/ML by Microchip Technology is a 64-terminal Ethernet transceiver IC with a 3.3V supply voltage, operating b/w 0-70°C. It features a square chip carrier package style with matte tin terminal finish and quad terminal position. Ideal for telecom applications, it has a very thin profile and is suitable for industrial use.
LAN9353TI/ML
LAN9312-NZW
LAN9312-NZW by Microchip Technology is an Ethernet switch IC with 128 terminals, operating at 3.3V. It features a max supply current of 295mA and operates in commercial temperature grades from 0 to 70°C. This telecom switching IC is designed for surface mount applications with a square package shape and matte tin terminal finish.
LAN9353T/PT
LAN9353T/PT by Microchip Tech is an Ethernet transceiver IC with 64 terminals in a square package. Operating temp range of 0-70°C, it has a nominal voltage of 3.3V. Ideal for telecom applications requiring high-speed data transmission over Ethernet networks.
LAN9355I/ML
ETHERNET SWITCH; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 88; Package Code: HVQCCN; Package Shape: SQUARE;
LAN9353T/ML
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved