Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LAN8720AI-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a low supply current of 54 mA at 3.3V, suitable for industrial applications requiring reliable network interfaces in compact square chip carrier packages.
Median Price
$1.280
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.254
1k+ parts
-
10k+ parts
Microchip Technology
$0.970
$0.900
$0.850
Mouser Electronics
Arrow
$1.026
Verical
$1.064
Master Electronics
$1.020
$0.998
Farnell
$1.592
$1.566
Element14
$1.500
$1.450
Nova Conductors
$1.690
Maritex
$1.860
$1.008
$0.863
Chip Stock
Component Sense
Vyrian
Electro Sonic
$3.870
$1.360
IBS Electronics
$1.706
$1.664
Ampacity Inc.
Semicontronic
$0.994
$0.989
Modulus Dynamics
$1.545
Corohmni
Component Stockers USA
$1.550
$1.250
$1.190
Argo Parts USA
$1.565
Advanced Electronics
$1.591
$1.512
Netroflash
CoreStaff
$4.880
$1.761
Aztec Data Supply Inc.
$6.776
GreenTree Electronics
Eastek
$1.911
Glotronic Ltd.
Perfect Parts
Futuretech Components
Lixinc
iodParts Technologies Inc.
$1.105
Continental Prestige Electronics
$1.070
Kepictronics
Alle Elektronik GmbH
Authorized Procurement Solutions
West Coast Incorporated
Robosynatics
$0.343
Lucentia Tech
Surface mount design makes it easy to install and saves space on the PCB.
This package style ensures efficient heat dissipation and a compact form factor.
Can withstand high operating temperatures, suitable for industrial applications.
Operates at a standard voltage, compatible with most systems.
Offers fast data transfer speeds, ideal for high-performance networks.
Network Interfaces LAN8720AI-CP-TR-ABC attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LAN8720AI-CP-TR-ABC Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - LAN8720A/LAN8720Ai 18/Jul/2016
PCN Assembly/Origin - Assembly Site 13/May/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015 MBB/Label Chgs 16/Nov/2018
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Micro Commercial Components
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LAN8742A-CZ-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8895RQXIA
KSZ8895RQXIA by Microchip: 128 terminals, 5 transceivers, 100 Mbps data rate. Ideal for Ethernet switch applications in industrial settings. Operates b/w -40 to 85°C with a compact rectangular package design.
SN65HVD231QDRQ1
SN65HVD231QDRQ1 by Texas Instruments is a BICMOS technology interface circuit with 1 channel and a data rate of 1 Mbps. It operates at a nominal voltage of 3.3V and is suitable for automotive applications.
DP83848MSQ/NOPB
DP83848MSQ/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a 40-terminal chip carrier package suitable for commercial temperature grades. This network interface IC is designed for surface mount applications in various electronic devices.
TCAN1051HGVDQ1
TCAN1051HGVDQ1 by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -55 to 125°C, and data rate of 5 Mbps. It is designed for telecom applications requiring a supply voltage of 5V, with AEC-Q100 screening level for automotive use. The small outline package style makes it suitable for space-constrained designs in harsh environments.
DP83867CSRGZT
DP83867CSRGZT by Texas Instruments is an Ethernet transceiver with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates b/w 0-70°C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it features nickel palladium gold terminal finish and very thin profile design.
KSZ8041NL-TR
Microchip Technology's KSZ8041NL-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating at 3.3V, it has a temperature range of 0-70°C and peak reflow temp of 260°C. Ideal for network interfaces, this CMOS technology chip carrier is surface mountable and TS16949 compliant.
KSZ8721BLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8873RLL
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
TJA1043TK/1Y
NXP Semiconductors' TJA1043TK/1Y is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It features a small outline package style, gull wing terminal form, and nickel palladium gold silver finish. Ideal for telecom applications requiring high reliability in compact designs.
KSZ8081MNXIA
KSZ8081MNXIA by Microchip is an Ethernet transceiver IC with 100 Mbps data rate, operating at -40 to 85°C. It features a 32-terminal chip carrier package suitable for network interfaces, meeting TS 16949 screening standards. Ideal for industrial applications requiring a compact design and low power consumption.
MCP2562FDT-E/SNVAO
MCP2562FDT-E/SNVAO by Microchip: CAN FD transceiver with 8 Mbps data rate, operates at -40 to 125 °C, suitable for automotive applications. Features AEC-Q100 screening level, small outline package style, and matte tin terminal finish.
14255R-100
Adesto Technologies
Network Interfaces;
SN65HVD233DG4
SN65HVD233DG4 by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating b/w -40 to 125°C, it has a supply voltage of 3.3V and consumes up to 6mA. Ideal for automotive applications due to its small outline package and robust temperature grade.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
KSZ8041NLI
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ADIN1300CCPZ-R7
Analog Devices
ADIN1300CCPZ-R7 by Analog Devices is a Network Interface with 40 terminals, operating b/w -40 to 105°C. It features Ethernet transceiver type, 1.8V supply voltage, and 0.5mm terminal pitch. Ideal for industrial applications requiring compact square chip carrier design with matte tin finish.
LAN8741A-EN
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8873FLLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
NCV7342D10R2G
NCV7342D10R2G by Onsemi is a CMOS interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is AEC-Q100 compliant for automotive applications. With a compact small outline package style, it is designed for surface mount assembly in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8720A-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LAN8720AI-CP-ABC
Microchip Technology's LAN8720AI-CP-ABC is a surface mount Ethernet transceiver with 24 terminals and a package size of 4mm x 4mm. It operates at temperatures ranging from -40 to 85°C and has a data rate of 100 Mbps. This IC is commonly used in industrial applications requiring reliable network interfaces.
LAN8720AI-CP
LAN8720AI-CP by Microchip Technology is a network interface with 24 terminals, operating at 100 Mbps data rate. It has a supply voltage of 3.3V and max current of 54mA. Ideal for Ethernet transceiver applications in industrial settings due to its compact square package and wide temperature range (-40 to 85°C).
LAN8742A-CZ-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate. It operates at 0-70°C, has 24 terminals in a square chip carrier package style, and matte tin terminal finish. Ideal for network interfaces in commercial telecom applications due to its small size and surface mount capability.
LAN8710AI-EZK
LAN8710AI-EZK by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 3.3V power supply, square package shape, and matte tin terminal finish. Ideal for network interfaces in industrial applications due to its TS16949 screening level and compact chip carrier design.
LAN8710AI-EZK-TR
LAN8710AI-EZK-TR by Microchip is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3V power supply, matte tin finish, and square package shape suitable for industrial applications requiring network interfaces.
LAN8720A-CP-ABC
LAN8720A-CP-ABC by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a terminal pitch of 0.5mm, 24 terminals in a square package style, and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications requiring high-speed connectivity.
LAN8720A-CP
LAN8720A-CP by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a compact square package style and low power consumption of 54mA, suitable for network interfaces in commercial applications requiring reliable connectivity at temperatures ranging from 0 to 85°C.
LAN8742AI-CZ
LAN8742AI-CZ by Microchip is an Ethernet transceiver with 100 Mbps data rate. It operates at -40 to 85 °C, suitable for industrial use. The chip carrier package has 24 terminals in a square shape, making it ideal for network interfaces.
LAN8720A-CP-TR-ABC
LAN8720A-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It has a max supply current of 54mA and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications due to its small square package shape and surface mount capability.
LAN8710A-EZC-TR
LAN8710A-EZC-TR by Microchip: 3.3V supply, 100Mbps data rate, TS16949 screening. Ethernet transceiver for network interfaces in commercial applications with -40 to 85°C operating range and 32 terminals in a square chip carrier package.
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved