Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
24FC512T-I/ST by Microchip Technology is an EEPROM with 64KX8 organization, operating at 2.5V, and featuring I2C control byte for hardware write protection. It has a max clock frequency of 1 MHz and can endure up to 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
Median Price
$1.130
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Microchip Technology
1+ parts
$0.820
100+ parts
$0.760
1k+ parts
$0.720
10k+ parts
$0.680
Newark
$0.845
$0.783
-
Mouser Electronics
$0.900
$0.798
$0.785
DigiKey
$0.910
Element14
$1.846
Arrow
$1.851
$1.766
$1.680
Farnell
$1.350
$1.230
Verical
$2.119
$2.054
Nova Conductors
$2.080
Chip Stock
VNN
Vyrian
IBS Electronics
$2.106
$0.286
Semtec, LLC
Semicontronic
$0.700
$0.682
$0.679
Ampacity Inc.
Continental Prestige Electronics
$1.260
$1.220
Vigor
$1.390
Netroflash
Argo Parts USA
Corohmni
$3.139
Aztec Data Supply Inc.
$5.430
Lixinc
RC Electronics
XL Components Corporation
Authorized Procurement Solutions
Marpe Global Electronics
QualityLine Systems
Durable and resistant to physical damage, providing protection to the internal components of the EEPROM.
Allows for faster data transfer speeds and improved efficiency in data communication.
Optimal supply voltage for stable operation and performance of the EEPROM.
Organized in a 64Kx8 configuration, providing sufficient memory storage capacity for various applications.
Capable of operating in a wide range of temperatures, making it suitable for industrial environments.
Large word capacity allows for storing a significant amount of data in the EEPROM.
High endurance rating ensures reliable and long-lasting performance of the EEPROM.
Uses I2C serial bus for communication, which is a widely adopted standard for serial communication in devices.
EEPROM 24FC512T-I/ST attributes and parameters. Explore more EEPROM devices from Microchip Technology
Maximum Clock Frequency (fCLK):
Minimum Data Retention Time:
Endurance:
I2C Control Byte:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Ports:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Programming Voltage (V):
Qualification:
Screening Level:
Maximum Seated Height:
Serial Bus Type:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Maximum Write Cycle Time (tWC):
Write Protection:
24FC512T-I/ST Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
PCN Assembly/Origin - Bond Wire 28/Mar/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015 Reel Design Update 07/May/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Diotec Semiconductor Ag
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
EU2B-YS2J03F
Idec
ROTARY SWITCH;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
AT24CM01-XHD-T
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Maximum Clock Frequency (fCLK): 1 MHz;
CAV24C02WE-GT3
CAV24C02WE-GT3 by Onsemi is an EEPROM with 2Kx1 organization, 2048-bit memory density, and 1000000 write/erase cycles. It operates in synchronous mode with a max clock frequency of 0.4 MHz. Ideal for automotive applications due to its temperature grade and hardware write protection feature.
AT25128B-SSHL-B
AT25128B-SSHL-B by Microchip is a 16KX8 EEPROM with SPI serial bus, 20 MHz clock frequency, and 1000000 write/erase cycles. It operates at -40 to 85 °C, has a supply voltage of 4.5-5.5 V, and is ideal for industrial applications requiring reliable non-volatile memory storage.
24LC02BT-I/SN
24LC02BT-I/SN by Microchip Technology is a small outline EEPROM with 256x8 organization, operating at 5V. It features I2C control byte, hardware write protection, and endurance of 1M cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
AT24C512C-SSHM-B
AT24C512C-SSHM-B by Microchip is a 64KX8 EEPROM with I2C control byte 1010DDDR. It operates at 1 MHz, has 1000000 write/erase cycles endurance, and supports hardware write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact small outline package.
DS1990A-F5
Maxim Integrated
DS1990A-F5 by Maxim Integrated is a 64-bit EEPROM with 1-WIRE serial bus. Operating at 3.3V, it has an industrial temperature grade and asynchronous mode. Ideal for applications requiring secure data storage in harsh environments.
CAT24C256WI-GT3
Catalyst Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
AT24C128C-MAHM-T
AT24C128C-MAHM-T by Microchip: 16KX8 EEPROM with I2C control, 1MHz clock freq., and 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
AT25256B-XHL-T-537
AT25256B-XHL-T-537 by Microchip is a 32KX8 EEPROM with 20 MHz clock frequency, SPI serial bus, and 262144 bit memory density. It operates in industrial temperature range (-40 to 85 °C) and offers 1000000 write/erase cycles. Ideal for applications requiring reliable non-volatile memory storage in compact designs.
AT28LV010-20JU-630
AT28LV010-20JU-630 by Microchip is a 128KX8 EEPROM with 3.3V supply, operating from -40 to 85 °C. It offers 100000 Write/Erase Cycles, 200 ns access time, and supports hardware/software write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact chip carrier package.
M95640-WDW6TP
M95640-WDW6TP by STMicroelectronics is an 8KX8 EEPROM with SPI serial bus, 10 MHz clock frequency, and 1000000 write/erase cycles. It operates at -40 to 85 °C and has a small outline package for industrial applications.
M24128-BRDW6TP
M24128-BRDW6TP by STMicroelectronics is an 8-terminal EEPROM with 16Kx8 organization, operating at a clock frequency of 0.4 MHz. It features a serial I2C bus type, 5 ms write cycle time, and memory density of 131072 bits. Ideal for industrial applications requiring reliable non-volatile memory storage in compact form factors.
24LC08BT-I/OTG
24LC08BT-I/OTG by Microchip Technology is a 1KX8 EEPROM with I2C control byte 1010XMMR. It operates at 0.4 MHz clock frequency, has 1000000 write/erase cycles endurance, and supports hardware write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact form factor.
24AA256-I/ST
24AA256-I/ST by Microchip Technology is an EEPROM with 32KX8 organization, operating at 2.5V, and featuring I2C control byte 1010DDDR. It has a memory density of 262144 bit and can endure up to 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
24LC128-I/ST
24LC128-I/ST by Microchip Technology is a serial EEPROM with 16KX8 organization and 131072-bit memory density. It operates at a max clock frequency of 0.4 MHz and has a min data retention time of 200 ms. This EEPROM is commonly used in industrial applications for its high endurance of 1000000 write/erase cycles.
24LC512-I/P
24LC512-I/P by Microchip Technology is an EEPROM with 64KX8 organization, operating at 0.4 MHz clock frequency. It features a hardware write protection and can endure 1000000 Write/Erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
AT24CS01-STUM-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR; Terminal Form: GULL WING;
24LC16BT-I/SNG
24LC16BT-I/SNG by Microchip Technology is an EEPROM with 2KX8 organization, operating at 5V. It offers hardware write protection and endurance of 1M cycles. Suitable for industrial applications, it has a serial I2C bus type and operates at a max clock frequency of 0.4 MHz.
AT24C08C-SSHM-B
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
25LC512T-I/SN
25LC512T-I/SN by Microchip is a 64KX8 EEPROM with 20 MHz clock frequency, SPI serial bus, and 1000000 write/erase cycles. It operates at -40 to 85 °C for industrial applications requiring reliable non-volatile memory storage in compact systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
24FC1025-I/SM
24FC1025-I/SM by Microchip Technology is a 128KX8 EEPROM with I2C control byte 1010MDDR. It operates at 1 MHz, has 1000000 write/erase cycles endurance, and supports hardware write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a small outline package.
24FC1025-I/SN
Microchip Technology's 24FC1025-I/SN is an EEPROM with 128KX8 organization, operating at 2.5V, and featuring I2C control byte 1010MDDR. It has a max clock frequency of 1 MHz and is suitable for industrial applications requiring high endurance and low standby current.
24FC256-I/SN
24FC256-I/SN by Microchip Technology is a 32KX8 EEPROM with 1MHz clock frequency, operating at -40 to 85°C. It features I2C control byte, 1000000 write/erase cycles endurance, and serial bus type for industrial applications.
24FC1025T-I/SN
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Clock Frequency (fCLK): 1 MHz;
24FC256-I/ST
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 5.5 V;
24FC512-I/SN
The Microchip Technology 24FC512-I/SN is a serial EEPROM with 64KX8 organization, operating at up to 1 MHz. It features I2C control byte, hardware write protection, and endurance of 1000000 cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.
24FC64FT-I/OT
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Operating Mode: SYNCHRONOUS;
24FC1026-I/SN
24FC1026-I/SN by Microchip Technology is an EEPROM with 128KX8 organization, 1 MHz clock frequency, and 1000000 Write/Erase cycles. It operates in industrial temperature range and uses I2C serial bus for applications requiring reliable non-volatile memory storage.
24FC64-I/MS
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE; Minimum Supply Voltage (Vsup): 2.5 V;
24FC512-I/SM
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Screening Level: AEC-Q100;
24FC256T-I/SN
24FC64T-I/MC
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Write Protection: HARDWARE;
24FC64-I/SN
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Form: GULL WING;
24FC64T-I/MNY
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; No. of Functions: 1;
24FC256-I/SM
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
24FC1025T-I/SM
Microchip Technology's 24FC1025T-I/SM is an EEPROM with 128KX8 organization, operating at 2.5V, and featuring I2C control byte 1010MDDR. Ideal for industrial applications, it offers a max clock frequency of 1 MHz, endurance of 1M cycles, and operates in the temperature range of -40 to 85°C.
24FC256-I/SNG
24FC256-I/SNG by Microchip Technology is a 32Kx8 EEPROM with I2C control byte for hardware write protection. Operating at 1MHz, it offers 1000000 write/erase cycles and has a memory density of 262144 bits. Ideal for industrial applications requiring reliable non-volatile memory storage.
24FC64-I/MC
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 40;
24FC256-I/MS
24FC256-I/MS by Microchip Technology is an EEPROM with 32KX8 organization, operating at 1 MHz clock frequency. It has a memory density of 262144 bit and can endure 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact form factor.
24FC512T-I/CS17K
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VFBGA; Package Shape: RECTANGULAR; No. of Words Code: 64K;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved