Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Maximum DC Off-state Voltage: 420 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Silicon Surge Protectors P5103ACMCL60 attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
Configuration:
Maximum DC Off-state Voltage:
JESD-30 Code:
JESD-609 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
P5103ACMCL60 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM358AN
Samsung
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Wuxi Xuyang Electronic
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NTVB058NSB-L
NTVB058NSB-L by Onsemi is a silicon surge protector with a max breakdown voltage of 77V. It has a trigger device type of SILICON SURGE PROTECTOR and operates b/w -40 °C to 150°C. Ideal for applications requiring protection against electrical surges in compact spaces.
TPA110A-12-RL
STMicroelectronics
STMicroelectronics TPA110A-12-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring an axial terminal position. Ideal for applications requiring isolated case connection and max breakdown voltage of 147V.
TISP7082F3SL
TISP7082F3SL by Texas Instruments is a 3-element surge protector with 5A peak current, 82V breakdown voltage, and UL recognition. It is used for surge protection in applications requiring a thyristor-based trigger device, such as telecommunications equipment and industrial electronics.
NP3100GBRLG
NP3100GBRLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max breakdown voltage of 350V and can handle a holding current of up to 150000mA. This thyristor surge protector is ideal for applications requiring protection against voltage surges, such as in power distribution systems.
NP2600SBT3G
The Onsemi NP2600SBT3G is a single silicon surge protector with a max breakdown voltage of 300V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against voltage surges. With UL recognition, this thyristor surge protector is ideal for surface mount installations in electronic devices.
SMP30-270
SMP30-270 by STMicroelectronics is a silicon surge protector with a non-repetitive peak on-state current of 14A. It features a max breakdown voltage of 360V and comes in a surface-mount package style. Ideal for protecting electronic circuits from voltage spikes in various applications.
HBL1025T1G
HBL1025T1G by Onsemi is a Silicon Surge Protector with surface mount capability. It has a max breakdown voltage of 16V and can hold up to 125mA current. Ideal for protecting electronic circuits from voltage spikes, it operates b/w -40°C to 150°C, making it suitable for various applications.
SP723AP
Harris Semiconductor
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Terminal Finish: Tin/Lead (Sn/Pb);
TISP2072F3P
TISP2072F3P by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 72V and non-repetitive peak on-state current of 6A. Ideal for protecting electronic devices from voltage surges, it features UL recognized standards and through-hole terminals for easy installation.
TISP7150F3SL
TISP7150F3SL by Texas Instruments is a silicon surge protector with 7.1A non-repetitive peak on-state current and 150V max breakdown voltage. It features a delta connected configuration, suitable for protecting electronic devices from voltage surges in various applications.
TLP140MTR
TLP140MTR by STMicroelectronics is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 31A and a max breakdown voltage of 200V. This surface-mount device in a small outline package is ideal for protecting electronic circuits from voltage surges.
TISP4250H3BJR
TISP4250H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 250V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TISP4350H3BJ
TISP4350H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 255V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and UL recognition.
NP3100SCMCT3G
NP3100SCMCT3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 275V and max breakdown voltage of 350V. It features a thyristor surge protector configuration, suitable for applications requiring protection against electrical surges. With UL recognition, it operates in temperatures ranging from -55 °C to 150°C.
TISP3180
TISP3180 by Texas Instruments is a Silicon Surge Protector with 10A Non Repetitive Peak On-state Current and 180V Max Breakdown Voltage. It features SERIES CONNECTED, CENTER TAP configuration for protection against voltage surges. Ideal for applications requiring reliable surge protection in electronic circuits.
NP2300SCT3G
The Onsemi NP2300SCT3G is a single silicon surge protector with a max breakdown voltage of 260V. It operates in temperatures ranging from -40 °C to 150°C and features a thyristor surge protector trigger device. Ideal for applications requiring UL recognized protection against electrical surges.
MMT10B260T3
The Onsemi MMT10B260T3 is a silicon surge protector with a max DC off-state voltage of 200V and max breakdown voltage of 320V. It operates b/w -40 °C to 175°C, making it suitable for protecting electronic devices from power surges in various applications. This single configuration device comes in a small outline package with dual terminals for surface mount assembly.
NTVB058NSC-L
NTVB058NSC-L by Onsemi is a silicon surge protector with a max breakdown voltage of 77V. It has a trigger device type of SILICON SURGE PROTECTOR and operates in temperatures ranging from -40 °C to 150°C. This single configuration device with surface mount capability is ideal for protecting electronic circuits from voltage spikes.
TISP4165M3LMFR
TISP4165M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 165V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
TISP3125F3SL
TISP3125F3SL by Texas Instruments is a silicon surge protector with 6A non-repetitive peak on-state current. It features a series connected, center tap configuration and has a max DC off-state voltage of 100V. Ideal for protecting electronic devices from power surges in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P5103ACMCLRP
Littelfuse
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Minimum Operating Temperature: -40 Cel;
P5103AC
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
P5103AARP
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum On-state Voltage: 5 V; Repetitive Peak Reverse Voltage: 420 V; Maximum Breakdown Voltage: 600 V; Maximum Holding Current: 150 mA;
P5103ACMCL
P5103ACL60
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Reference Standard: UL RECOGNIZED;
P5103ABLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Maximum Operating Temperature: 150 Cel;
P5103ACRP
SILICON SURGE PROTECTOR; Surface Mount: NO; Repetitive Peak Reverse Voltage: 420 V; Maximum Operating Temperature: 150 Cel; Maximum Breakdown Voltage: 600 V; Maximum Holding Current: 150 mA;
P5103AAL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; JESD-30 Code: R-PSIP-T3;
P5103ACL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Qualification: Not Qualified;
P5103AB
P5103ACMC
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Non Repetitive Peak On-state Current: 50 A;
P5103ACLFS1
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 600 V;
P5103ABL60
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Package Shape: RECTANGULAR;
P5103AALRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Maximum Holding Current: 150 mA;
P5103ABRP
SILICON SURGE PROTECTOR; Surface Mount: NO; Minimum Operating Temperature: -40 Cel; Repetitive Peak Reverse Voltage: 420 V; Maximum Breakdown Voltage: 600 V; Maximum Operating Temperature: 150 Cel;
P5103AA
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Non Repetitive Peak On-state Current: 20 A;
P5103AAL60
P5103ABL
P5103ACLRP
Teccor Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved