Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
Median Price
$0.703
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Bristol Electronics
1+ parts
-
100+ parts
1k+ parts
$0.487
10k+ parts
Component Stockers USA
$8.720
AZTECH Wire
$19.070
Authorized Procurement Solutions
Silicon Surge Protectors P4500SBLRP attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
P4500SBLRP Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Multiple Devices Molding Compound 18/Mar/2020 Mult Dev Epoxy Chg 31/Mar/2023
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Philips Semiconductors
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Bkc Semiconductors
Mde Semiconductor
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
TISP4115M3BJR
TISP4115M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 90V DC voltage, and 150°C max temp. Ideal for protecting electronic devices from power surges in various applications like telecommunications and industrial equipment.
TISP4290H3BJR
TISP4290H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 290V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TLP270G
TLP270G by STMicroelectronics is a silicon surge protector designed for robust applications. It features a max breakdown voltage of 400V, non-repetitive peak on-state current of 31A, and comes in a compact surface mount package. Ideal for protecting sensitive electronics from voltage spikes.
TISP2082F3D
TISP2082F3D by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It features a 4A non-repetitive peak on-state current and 66V max DC off-state voltage. Ideal for applications requiring UL-recognized surge protection in compact designs.
TISP4082LPR
TISP4082LPR by Texas Instruments is a single silicon surge protector with 2.5A non-repetitive peak on-state current and 82V max breakdown voltage. It is designed for surge protection applications in various electronic devices, offering a cylindrical package style with through-hole terminals and plastic/epoxy body material. Operating temperature ranges from 0°C to 70°C.
TPA110A-12-RL
STMicroelectronics TPA110A-12-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring an axial terminal position. Ideal for applications requiring isolated case connection and max breakdown voltage of 147V.
FLC02-200D
STMicroelectronics FLC02-200D is a single silicon surge protector with built-in diode and resistor. It has a 5A non-repetitive peak on-state current, 200V repetitive peak off-state voltage, and 0.01mA max leakage current. Ideal for surge protection in applications requiring a trigger device with operating temperatures from 0 to 150 °C.
TISP7180
TISP7180 by Texas Instruments is a silicon surge protector with 3 elements in delta configuration. It has a max breakdown voltage of 180V and can handle non-repetitive peak on-state current of 15A. Ideal for applications requiring protection against electrical surges, it features a rectangular package shape with through-hole terminals.
TISP4165H3LMFR
TISP4165H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current and 135V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with an operating temperature range of -40 to 150°C.
TISP7082F3P
TISP7082F3P by Texas Instruments is a 3-element surge protector with 4A peak current, 82V breakdown voltage, and UL recognition. It is a thyristor surge protector in a plastic/epoxy package for delta-connected configuration. Ideal for safeguarding against surges in electronic circuits.
SMP100-120
SMP100-120 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak current and 110V repetitive reverse voltage. It is a single configuration device in a small outline package, suitable for surface mount applications to protect against surges up to 160V.
TISP4115H3LMFR
TISP4115H3LMFR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, offering protection up to 115V breakdown voltage. Ideal for applications requiring reliable surge protection in electronic circuits.
TISP4200H3BJ
TISP4200H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 155V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like telecommunications equipment due to its thyristor surge protection design.
TISP4180H4BJR
TISP4180H4BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It features a thyristor surge protector trigger device and can operate b/w -40°C to 150°C. Ideal for surface mount applications requiring protection against voltage spikes.
ETP01-1621RL
STMicroelectronics ETP01-1621RL is a Silicon Surge Protector with 25V breakdown voltage, 30mA holding current, and -55 to 150°C operating temperature range. It is surface mountable and ideal for protecting electronic circuits from voltage surges in various applications.
SMP30-270
SMP30-270 by STMicroelectronics is a silicon surge protector with a non-repetitive peak on-state current of 14A. It features a max breakdown voltage of 360V and comes in a surface-mount package style. Ideal for protecting electronic circuits from voltage spikes in various applications.
NTVB275NSC-L
Onsemi
NTVB275NSC-L by Onsemi is a silicon surge protector with a max breakdown voltage of 350V. It operates in temperatures ranging from -40 °C to 150°C, making it suitable for various applications requiring protection against voltage surges. This surface-mount device features a dual-terminal configuration and tin finish, ideal for compact electronic designs.
TISP4290H3LMFR
TISP4290H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current, 220V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TCS-DL004-500-WH
Bourns
TCS-DL004-500-WH by Bourns is a silicon surge protector with separate, 2-element configuration. It is surface mountable and has a rectangular package shape. With a max clamping voltage of 40V, it is suitable for applications requiring current suppression and protection against voltage spikes.
MMT05B350T3G
The Onsemi MMT05B350T3G is a silicon surge protector with a non-repetitive peak on-state current of 32A. It features a max DC off-state voltage of 300V and operates b/w -40 °C to 125°C. Ideal for protecting electronic devices from power surges in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P4500Q22CLRP
Littelfuse
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CHIP CARRIER; Surface Mount: YES; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: NO LEAD;
P4500GBLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
P4500GCLRP
P4500Q22DLHLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): CHIP CARRIER; Surface Mount: YES; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
P4500SBLHLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: IEC-61000-4-5; MIL-STD-750; UL RECOGNIZED;
P4500SCLHLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Moisture Sensitivity Level (MSL): 1;
P4500SCLRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
P4500SCMCLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
P4500SDLHLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
P4502GBLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SERIES CONNECTED, 2 ELEMENTS; Maximum Operating Temperature: 150 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved