Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Terminals: 2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Authorized Procurement Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Silicon Surge Protectors P2100SCMCL attributes and parameters. Explore more Silicon Surge Protectors devices from Littelfuse
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
P2100SCMCL Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Temic Semiconductors
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
TISP4400M3LPR
TISP4400M3LPR by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current and 400V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage surges in various applications.
NP1800SCT3G
Onsemi
NP1800SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 220V, and trigger device type as thyristor. It has a small outline package shape and is surface mountable. Ideal for protecting electronic devices from power surges in various applications.
MMT05A310T3G
The Onsemi MMT05A310T3G is a single silicon surge protector with a max DC off-state voltage of 270V and max breakdown voltage of 365V. It operates b/w -40 °C to 125°C, making it suitable for protecting electronic devices from power surges in various applications.
NP2300SAMCT3G
NP2300SAMCT3G by Onsemi is a silicon surge protector with 20A non-repetitive peak on-state current. It features a max DC off-state voltage of 190V and trigger device type as thyristor. Ideal for applications requiring protection against voltage surges in electronic circuits.
NP1100SCT3G
NP1100SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 130V, and trigger device type as thyristor. It operates b/w -40 to 150 °C and is ideal for UL recognized applications requiring protection against surges.
TISP4260M3LMR
TISP4260M3LMR by Texas Instruments is a single thyristor surge protector with 32A peak current, 260V breakdown voltage, and 150°C max operating temp. Ideal for protecting electronic devices from power surges in various applications like telecommunications equipment and industrial machinery.
TBU-CA025-050-WH
Bourns
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
TISP2180F3SL
TISP2180F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It offers a non-repetitive peak on-state current of 6A and a max DC off-state voltage of 145V. Ideal for applications requiring UL-recognized surge protection in an inline package style.
TISP4380F3SL
TISP4380F3SL by Texas Instruments is a single silicon surge protector with 6A peak current, 270V off-state voltage, and 380V breakdown voltage. Ideal for protecting electronic devices from power surges in various applications due to its UL recognized standard and temperature range of -40°C to 150°C.
NP3100SAMCT3G
NP3100SAMCT3G by Onsemi is a silicon surge protector with a non-repetitive peak on-state current of 20A. It features a max DC off-state voltage of 275V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
TISP4080H3BJ
TISP4080H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 65V DC voltage, and 80V breakdown voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. The device operates b/w -40°C to 150°C and is UL recognized for reliability.
NP0720SET3G
NP0720SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 88V. Ideal for protecting electronic devices from power surges in various applications.
TPA110B-18
STMicroelectronics
STMicroelectronics TPA110B-18 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package, tin/lead terminal finish, and 133V max breakdown voltage. Ideal for applications requiring isolated case connection and axial terminal position.
RBO40-40T
STMicroelectronics' RBO40-40T is a silicon surge protector with a max clamping voltage of 40V. It features a single configuration with built-in diode and matte tin terminal finish. Ideal for applications requiring protection against electrical surges in various electronic devices.
SMPTA320
SMPTA320 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a max DC off-state voltage of 290 V, non-repetitive peak on-state current of 16 A, and operates b/w -55 °C to 150°C. Ideal for protecting sensitive electronics from voltage spikes.
TISP4115M3LMR
TISP4115M3LMR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 115V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP4095M3BJR
TISP4095M3BJR by Texas Instruments is a single silicon surge protector with 32A peak current, 75V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
TISP3082F3SL
TISP3082F3SL by Texas Instruments is a Silicon Surge Protector with 6A Non Repetitive Peak On-state Current and 82V Max Breakdown Voltage. It features SERIES CONNECTED, CENTER TAP configuration for surge protection applications. The device has UL RECOGNIZED reference standard and comes in RECTANGULAR package style suitable for various electronic systems.
TISP4165H3BJR
TISP4165H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 135V DC voltage, and 165V breakdown voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges in various electronic devices.
MMT05A260T3
The Onsemi MMT05A260T3 is a single silicon surge protector with 200V DC off-state voltage and 320V max breakdown voltage. It operates b/w -40 °C to 125°C, making it suitable for protecting electronic devices from power surges in various applications. This surface-mount device features a thyristor surge protector configuration and is UL recognized.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P2100SBLRP
Littelfuse
THYRISTOR SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
P2100SB
SILICON SURGE PROTECTOR; Surface Mount: YES; Maximum On-state Voltage: 4 V; Maximum Holding Current: 150 mA; Maximum Operating Temperature: 150 Cel; Maximum Breakdown Voltage: 240 V;
P2103AA60RP
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Maximum Time At Peak Reflow Temperature (s): 60;
P2100SCMC
SILICON SURGE PROTECTOR; Surface Mount: YES; Maximum Breakdown Voltage: 240 V; Maximum Operating Temperature: 150 Cel; Maximum On-state Voltage: 4 V; Minimum Operating Temperature: -40 Cel;
P2103AA60ARP
SILICON SURGE PROTECTOR; Surface Mount: NO; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 150 Cel; Maximum Breakdown Voltage: 250 V; Maximum On-state Voltage: 10 V;
P2100SCL
P2103AA60TA
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; JESD-609 Code: e0;
P2100SAL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
P2100SBL
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
P2100SCMCLRP
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Holding Current: 150 mA;
P2103AA60A
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum Breakdown Voltage: 250 V; Repetitive Peak Reverse Voltage: 170 V; Maximum Operating Temperature: 150 Cel; Maximum On-state Voltage: 10 V;
P2100SC
SILICON SURGE PROTECTOR; Surface Mount: YES; Repetitive Peak Reverse Voltage: 180 V; Maximum Holding Current: 150 mA; Maximum Breakdown Voltage: 240 V; Maximum Operating Temperature: 150 Cel;
P2103AA60RB
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Minimum Breakdown Voltage: 180 V;
P2100SALRP-A
THYRISTOR SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN;
P2100SCLRP
THYRISTOR SURGE PROTECTOR; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
P2100SA
SILICON SURGE PROTECTOR; Surface Mount: YES; Maximum Breakdown Voltage: 240 V; Minimum Operating Temperature: -40 Cel; Repetitive Peak Reverse Voltage: 180 V; Maximum Holding Current: 50 mA;
P2100SALRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
P2103AA
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Repetitive Peak Reverse Voltage: 170 V;
P2103AA60
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Peak Reflow Temperature (C): 245;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved