Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 280 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 51 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fuses LA130URD71IL0280 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Built-in Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
LA130URD71IL0280 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Protek Devices
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Dc Components
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
International Devices
Taitron Components
LP-CC-20
Eaton Corporation
Eaton Corporation LP-CC-20 fuse, rated 20A and 600V AC/DC, with time delay blow characteristic. Used for circuit protection in applications requiring a 10mm x 38.1mm body size and end cap terminal shape. Complies with CE, CSA, UL standards and has a high breaking capacity of 200kA.
FWX-40A
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
FRN-R-8
Eaton Corporation's FRN-R-8 fuse, with 8A rated current and 250V AC/125V DC voltage ratings, features a time delay blow characteristic. Measuring 14.3mm x 50.8mm, it is an RK5 class fuse suitable for electric circuit protection in various applications like inline mounting due to its CE, CSA, and UL certifications.
SF-1206F250-2
Bourns
Bourns SF-1206F250-2 fuse, rated 2.5A with 50A breaking capacity, features fast blow characteristic and UL reference standard. With dimensions of 3.1mm x 1.55mm x 0.6mm, it is ideal for electric circuit protection in applications requiring surface mount fuses with a trip delay of 60s at -20 to +105°C temperature range.
0218.063MXP
Littelfuse
Littelfuse 0218.063MXP fuse, rated at 0.063A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C.
0297004.WXNV
Littelfuse 0297004.WXNV is a MINI fuse with 4A rated current, 31J nominal joule integral, and 0.03s trip time. It is used for circuit protection in applications requiring a 32V rated voltage, such as automotive electronics and power distribution systems.
JLLS050
The Littelfuse JLLS050 fuse is rated for 50A and has a fast blow characteristic. With a rated AC voltage of 600V and DC voltage of 300V, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
KTK-10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP;
DFJ-250
DFJ-250 by Eaton Corp is a 250A fast blow electric fuse with 600V AC and 450V DC ratings. Measuring 53.59mm x 85.85mm, it features TAB/BLADE terminals and inline/holder mounting for high breaking capacity of 200kA. Ideal for circuit protection in various applications meeting CSA and UL standards.
KTK-R-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0458008.DR
0458008.DR by Littelfuse is a NANO fuse with 8A rated current, 63V DC voltage, and 13.448J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount fuse with WRAPAROUND terminals and a pre-arcing rating of 9 A2/s.
0697-0100-01
Bel Fuse
Bel Fuse 0697-0100-01 is a MICRO fuse with 0.1A rated current and 250V AC voltage. With dimensions of 8.35mm x 4mm x 7.7mm, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature and matte tin terminal finish.
0437002.WR
Littelfuse 0437002.WR fuse, rated at 63V and 2A, offers fast blow characteristic with trip time of 1s. With dimensions of 3.2mm x 1.63mm x 0.82mm, it is ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity up to 50A.
FNQ-R-2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
0001.2712.11
Schurter Ag
Schurter Ag 0001.2712.11 fuse: 6.3A, 250V, 171J joule integral; 5x20mm size with time lag blow characteristic. Ideal for circuit protection in applications requiring rated breaking capacity of 1500A and operating temperatures from -55°C to 125°C.
25ET
25ET fuse by Eaton Corporation is a 25A electric fuse with a rated AC voltage of 690V and rated DC voltage of 350V. With a nominal joule integral of 25J and rated breaking capacity of 200kA, it is ideal for circuit protection in various applications. This fuse has dimensions of 48mm x 19.1mm and features TAB/BLADE terminals for easy installation in INLINE/HOLDER mounting setups.
LPJ-60SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
8020.5078
The Schurter Ag 8020.5078 fuse is a 6.3x32mm electric fuse with a rated current of 10A and a max operating temperature of 85°C. It has a blow characteristic of VERY FAST and is suitable for circuit protection in applications such as inline/holder mounting in UL and CUL reference standards.
0685T4000-01
Bel Fuse 0685T4000-01 is a 1206 size fuse with 4A rated current and 63V DC voltage. It has a slow blow characteristic, trip time of 0.002s, and rated breaking capacity of 50A. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
BK/AGC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA130URD71LLI0160
ELECTRIC FUSE; Manufacturer Series: LA;
LA130URD70TTI0100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 100 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
LA130URD70LI0160
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD71IL0160
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Body Width: 51 inch;
LA130URD70TTI0160
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: END CAP; Body Width: 40 inch;
LA130URD70TTI0063
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 63 A; Terminal Shape: END CAP; Body Width: 40 inch;
LA130URD71LLI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Dimensions: 51mm x 51mm x 72.5mm;
LA130URD70LI0080
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD70TTI0125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 125 A; Terminal Shape: END CAP; Nominal Joule Integral: 1.3 J;
LA130URD70LI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 100000 A;
LA130URD70TTI0315
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 315 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
LA130URD70TTI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: END CAP; Reference Standard: UL;
LA130URD70LI0315
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 315 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
LA130URD70LI0125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 1.3 J;
LA130URD70TTI0080
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 80 A; Terminal Shape: END CAP; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD70LI0063
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 100000 A;
LA130URD70LI0100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
LA130URD70LI0250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
LA130URD70TTI0250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 250 A; Terminal Shape: END CAP; Body Length/Diameter: 40 mm;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved