Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
Median Price
$29.958
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$19.622
100+ parts
$15.947
1k+ parts
-
10k+ parts
RS Americas
$29.340
$27.860
DigiKey
$42.870
$25.034
$22.443
Mouser Electronics
$46.720
$27.270
$24.450
Flame Enterprises (Authorized)
Master Electronics
$24.420
$21.790
Verical
$30.577
Powertech Controls
$10.520
Nova Conductors
$22.610
Galco
$26.660
Quotebeam
$27.470
Electro Sonic
$28.500
$22.470
$21.530
Carlton-Bates
$37.370
VNN
Electronic Supply
Vyrian
IBS Electronics
$53.298
$52.903
Bisco
Aztec Data Supply Inc.
$12.730
Corohmni
$16.703
Advanced Electronics
$17.204
$16.344
Continental Prestige Electronics
$21.370
$20.943
Netroflash
Neutron USA
$89.990
Argo Parts USA
High AC voltage rating allows this fuse to be used in various applications where high voltage protection is needed.
Compact size makes it easy to fit in tight spaces without taking up too much room.
End cap terminals provide secure connections and easy installation.
Standard dimensions ensure compatibility with a wide range of fuse holders.
Adequate height for efficient heat dissipation, ensuring the fuse operates at optimal conditions.
Suitable for applications requiring a 15 ampere current rating, providing reliable protection.
Can operate at high temperatures without compromising performance, ideal for demanding environments.
Time delay characteristic provides protection against temporary overloads, allowing smooth operation without unnecessary tripping.
Specifically designed as an electric fuse, ensuring effective circuit protection against faults and overcurrents.
High breaking capacity ensures the fuse can safely interrupt fault currents up to 200,000 amperes, preventing damage to the circuit.
Suitable for applications requiring a DC voltage rating of up to 300 volts, providing versatile protection.
Can be mounted inline or with a holder, offering flexibility in installation options.
Compliance with recognized standards ensures the fuse meets safety and performance requirements, giving peace of mind to users.
Fuses ATQR15 attributes and parameters. Explore more Fuses devices from Mersen S A
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
ATQR15 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5920-01-533-3343, 5920015333343, 5920-21-920-4912, 5920219204912
NIIN
015333343, 219204912
Today, the industries are facing major technological challenges, to improve their competitiveness in their markets, but also to contribute to a world that is more respectful of the environment and its resources. We are convinced that technological innovation is essential in order for high-tech industries in energy, electronics or transportation to progress and reinvent themselves for the benefit of all. We have been offering our expertise with the same high standards and relevance for more than 130 years, all over the world, because we want to achieve shared and sustainable development. Where technology is advancing and innovating, you will always find a bit of Mersen.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LAN8720A-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
International Semiconductor
Bkc Semiconductors
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
NXP Semiconductors
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
0481.180HXL
Littelfuse
Littelfuse 0481.180HXL fuse has a rated current of 0.18A and nominal joule integral of 0.04J, with fast blow characteristic for circuit protection at 125V AC/DC. It is designed for inline mounting applications, featuring built-in alarm and indicator functions, meeting CSA and UL standards.
FNQ-R-20
Eaton Corporation
Eaton Corporation's FNQ-R-20 fuse, rated at 20A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline/holder mounting configurations for electrical systems.
LP-CC-1-1/8
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.1 A; Terminal Shape: END CAP;
NON-40
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
FWP-32A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 32 A; Terminal Shape: END CAP;
1202
Pacific Engineering
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 1000 A;
56000001009
Littelfuse 56000001009 fuse, TR5 size, rated 250V AC/DC. Ideal for circuit protection in electronics. Through-hole mounting, UL and VDE standards compliant, operating temp -40 to 85°C.
0297010.H
Littelfuse 0297010.H is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and is used for electric circuit protection in various applications due to its compact size and high breaking capacity.
0437002.WR
Littelfuse 0437002.WR fuse, rated at 63V and 2A, offers fast blow characteristic with trip time of 1s. With dimensions of 3.2mm x 1.63mm x 0.82mm, it is ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity up to 50A.
0215002MXP
Littelfuse 0215002MXP fuse with 2A current, 250V voltage rating, and 11.68J nominal joule integral. Ideal for circuit protection in applications requiring time lag blow characteristic and rated breaking capacity of 1500A. Dimensions of 5x20mm with nickel terminal finish for inline mounting.
FRN-R-8
Eaton Corporation's FRN-R-8 fuse, with 8A rated current and 250V AC/125V DC voltage ratings, features a time delay blow characteristic. Measuring 14.3mm x 50.8mm, it is an RK5 class fuse suitable for electric circuit protection in various applications like inline mounting due to its CE, CSA, and UL certifications.
80ET
80ET fuse by Eaton Corporation is a 80A electric fuse with a rated AC voltage of 690V and rated breaking capacity of 200kA. With dimensions of 48mm x 19.1mm, it is suitable for inline mounting applications in compliance with standards BS88 and CE.
SP/LPJ-10SP
Eaton Corporation's SP/LPJ-10SP fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring silver terminal finish and inline mounting, it has a breaking capacity of 300kA. Ideal for CE, CSA, and UL compliant applications requiring reliable circuit protection.
KTK-R-20
Eaton Corporation's KTK-R-20 fuse, rated at 20A and 600V, features fast blow characteristic with a breaking capacity of 200kA. This CC-class fuse, with nickel terminal finish, is ideal for electric circuit protection in applications requiring inline mounting. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
KTK-R-1-1/2
Eaton Corporation's KTK-R-1-1/2 fuse, rated at 1.5A and 600V, features fast blow characteristic with a body size of 10.3mm x 38.1mm. It is a CC class electric fuse with nickel terminal finish, suitable for inline mounting applications with a high breaking capacity of 200000A.
ATQR2/10
Mersen S A
The Mersen S A ATQR2/10 fuse is a time-delay electric fuse with a rated current of 0.2A and voltage of 600V, suitable for inline mounting applications. It has a compact body size of 10.4mm x 38.1mm and meets CSA, CE, and UL standards, offering high breaking capacity of 200kA for circuit protection at up to 80°C temperature.
0451.500MRL
Littelfuse 0451.500MRL Nano fuse with 0.5A current rating, 125V DC/AC voltage, and 50A breaking capacity. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm for surface mount applications. Reference standards include CSA, CUL, and UL certifications.
37211000431
Littelfuse 37211000431 fuse, rated at 1A and 250V, features a time lag blow characteristic with trip delay of 0.02s. With dimensions of 8.5mm x 8mm, it is ideal for circuit protection in applications requiring a max operating temperature of 85°C. CCC, CE, CUL, KC, PSE, UL, VDE standards compliant.
0157002.DRT
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
LP-CC-2
Eaton Corporation LP-CC-2 fuse, rated 2A and 600V AC/300V DC, with time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL standard applications. Dimensions: 10mm x 38.1mm body size with end cap terminal shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATQR20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
ATQR25
The Mersen S A ATQR25 fuse is a 25A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it features time delay blow characteristic and is suitable for inline/holder mounting applications in circuits requiring protection up to 300V DC at a max operating temperature of 80°C.
ATQR5
The Mersen S A ATQR5 fuse, rated at 5A and 600V AC/300V DC, features a time delay blow characteristic. With a compact size of 10.4mm x 38.1mm, it is ideal for circuit protection in various applications. Compliant with CSA, CE, and UL standards, it offers a high breaking capacity of 200kA.
ATQR2-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Dimensions: 10.4mm x 38.1mm;
ATQR4
ATQR4 by Mersen S A is a 4A electric fuse with time delay blow characteristic. Rated for 600V AC and 300V DC, it has a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in inline/holder mounting applications for circuit protection.
ATQR4-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 4.5 A; Terminal Shape: END CAP;
ATQR12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATQR1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ATQR4/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .4 A; Terminal Shape: END CAP; Dimensions: 10.4mm x 38.1mm;
ATQR2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Maximum Operating Temperature: 80 Cel;
ATQR2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATQR2-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2.8 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATQR1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ATQR10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
ATQR5-6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 5.6 A; Terminal Shape: END CAP;
ATQR3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
ATQR1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Terminal Finish: TIN;
ATQR6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .6 A; Terminal Shape: END CAP; Reference Standard: CSA, CE, UL;
ATQR1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA, CE, UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved