Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATDR1-1/2 by Mersen S A is a 1.5A time delay fuse with 600V AC and 300V DC ratings. It has a compact body size of 10.4mm x 38.1mm, suitable for inline mounting applications. With a high breaking capacity of 200kA, it provides reliable circuit protection in various electrical systems certified by CSA and UL standards.
Median Price
$19.770
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Wolf Automation
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$19.230
$14.420
$12.500
Nova Conductors
$19.496
Quotebeam
$54.000
VNN
Vyrian
Electronic Supply
Bristol Electronics
Flex Direct, LLC
Andel Nordic
$9.609
$9.224
Corohmni
$12.286
AZTECH Wire
$18.478
Advanced Electronics
$18.518
Continental Prestige Electronics
$19.106
Aztec Data Supply Inc.
$19.780
Neutron USA
$89.990
Argo Parts USA
Netroflash
$18.521
$18.131
This high rated AC voltage ensures that the fuse can effectively protect circuitry operating at higher voltages without the risk of damage or failure.
The compact size of the fuse allows for easy installation and integration into various electronic systems or devices.
The end cap terminal shape provides a secure and stable connection, ensuring reliable performance and safety.
The specific dimensions make it easy to identify and select the correct fuse for a particular application, reducing the risk of errors during installation.
The tall body height allows for better heat dissipation and helps in protecting the surrounding components from potential heat damage.
The rated current of 1.5 A ensures that the fuse can handle the specified current load without any risk of overheating or failure, providing reliable circuit protection.
The time delay blow characteristic allows the fuse to withstand temporary overloads without immediately breaking, making it suitable for applications where inrush currents are common.
Being an electric fuse, it offers effective protection against overcurrent events and helps prevent damage to connected devices or equipment.
The high rated breaking capacity ensures that the fuse can safely interrupt circuit faults or short circuits, providing reliable protection to the connected components.
The rated DC voltage of 300 V allows the fuse to be used in DC circuitry applications, offering consistent protection and performance.
The ability to be mounted either in-line or in a holder offers flexibility in installation options, making it suitable for a wide range of applications and setups.
The compliance with reference standards CSA and UL ensures that the fuse meets safety and quality requirements, giving assurance of reliability and performance.
Fuses ATDR1-1/2 attributes and parameters. Explore more Fuses devices from Mersen S A
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Terminal Shape:
Mounting Feature:
ATDR1-1/2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Today, the industries are facing major technological challenges, to improve their competitiveness in their markets, but also to contribute to a world that is more respectful of the environment and its resources. We are convinced that technological innovation is essential in order for high-tech industries in energy, electronics or transportation to progress and reinvent themselves for the benefit of all. We have been offering our expertise with the same high standards and relevance for more than 130 years, all over the world, because we want to achieve shared and sustainable development. Where technology is advancing and innovating, you will always find a bit of Mersen.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Yageo
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
0452.500MRL
Littelfuse
Littelfuse 0452.500MRL is a NANO size fuse with 0.5A rated current and 125V AC/DC voltage. It has a slow blow characteristic, 0.24J nominal joule integral, and trip time of 0.002s. Ideal for circuit protection in applications requiring surface mount fuses with gold terminal finish.
KTK-R-1/10
Eaton Corporation
The Eaton Corporation's KTK-R-1/10 fuse, rated at 0.1A and 600V AC, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for electric circuit protection, it has a high breaking capacity of 200kA and is suitable for inline mounting applications per CE, CSA, and UL standards.
FWP-50A22F
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP;
0235003.MXP
0235003.MXP by Littelfuse is a 5x20mm fuse with 250V rated voltage and 3A current. It offers fast blow characteristic, 8.395J nominal joule integral, and trip time of 5 seconds. Ideal for circuit protection in applications requiring inline mounting, it has CE, CSA, PSE, and UL certifications.
FNQ-R-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
AGU-40
Eaton Corporation's AGU-40 fuse, rated at 40A and 32V AC, features fast blow characteristic and end cap terminal shape. It is an electric fuse with dimensions of 10.41mm x 38.1mm, suitable for inline/holder mounting applications in circuit protection.
0451015.MRL
0451015.MRL by Littelfuse is a NANO-sized electric fuse with a rated current of 15A and rated voltage of 65V. It has a very fast blow characteristic and can withstand temperatures from -55°C to 125°C. This surface mount fuse is commonly used for circuit protection in various applications.
0273.500H
Littelfuse 0273.500H is a MICRO fuse with 0.5A rated current, 125V AC/DC voltage, and very fast blow characteristic. It has a trip delay of 14400s and nominal joule integral of 0.0716J. Ideal for circuit protection in applications requiring high breaking capacity and through-hole mounting.
0297005.WXNV
Littelfuse 0297005.WXNV fuse, rated at 5A and 32V, offers quick 0.03s trip time with 37J nominal joule integral. Ideal for circuit protection in automotive applications due to its MINI size and TAB/BLADE terminals. Operating range from -40°C to 125°C ensures reliable performance in various conditions.
ATQR15
Mersen S A
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
ATQR4-1/2
Mersen S A's ATQR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 10.4mm x 38.1mm dimension, it is ideal for electric circuit protection with a high breaking capacity of 200kA at 300V DC. Suitable for inline mounting, it complies with CSA, CE, and UL standards.
ATQR1
The Mersen S A ATQR1 fuse is rated for 600V AC with a 1A current and time delay blow characteristic. It has a body length of 10.4mm, diameter of 38.1mm, and end cap terminal shape. Suitable for inline mounting applications, it offers circuit protection with a high breaking capacity of 200kA at up to 80°C temperature.
LP-CC-1
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1 A; Terminal Shape: END CAP;
AJT60N
AJT60N fuse by Mersen S A is a 60A, time delay electric fuse with 600V AC and 400V DC ratings. With a body length of 27mm and height of 60mm, it features an end cap terminal shape. Ideal for inline mounting applications, it has a high breaking capacity of 200kA and complies with CSA, IEC, and UL standards.
0468001.NR
Littelfuse 0468001.NR fuse, rated at 63V and 1A, with trip time of 0.0015s. Ideal for circuit protection in electronics due to slow blow characteristic and compact size of 3.18mm x 1.52mm x 0.58mm. Compliant with CSA and UL standards for reliable performance in various applications.
170M2619
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated Current: 315 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 10000 J;
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
0218002.MXP
Littelfuse 0218002.MXP fuse, rated 2A and 250V, features a time lag blow characteristic with trip time of 0.02s. With dimensions of 5x20mm, it offers circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CE, CSA, KC, PSE, SEMKO, SEV, UL and VDE standards.
JJN-30
The Eaton Corporation's JJN-30 fuse, rated at 30A and 300V AC/160V DC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 10.3mm x 22.2mm and an end cap terminal shape, it is commonly used for electric circuit protection in various applications due to its CE, CSA, and UL certifications.
0JTD125.XXID
Littelfuse 0JTD125.XXID fuse, rated 125A & 600V AC/500V DC, with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring high breaking capacity of 200kA. Features indicator and complies with CSA & UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATDR20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
ATDR30
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
ATDR10
The Mersen S A ATDR10 fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline mounting feature. Ideal for circuit protection in various applications requiring a high breaking capacity of 200kA.
ATDR4
Mersen S A's ATDR4 fuse, rated 4A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting in various applications meeting CSA and UL standards.
ATDR2-1/2
ATDR2-1/2 by Mersen S A is a 600V, 2.5A time delay fuse with 200kA breaking capacity. It has a body size of 10.4mm x 38.1mm and end cap terminals, suitable for electric circuit protection in various applications requiring inline mounting or holder setups according to CSA and UL standards.
ATDR2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.25 A; Terminal Shape: END CAP;
ATDR3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3 A; Terminal Shape: END CAP;
ATDR25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
ATDR12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATDR1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: .5 A; Terminal Shape: END CAP;
ATDR2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
ATDR3-1/2
ATDR3-1/2 by Mersen S A is a 3.5A time delay fuse with 600V AC and 300V DC ratings. Featuring a blow characteristic of TIME DELAY, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting, it complies with CSA and UL standards for various electrical applications.
ATDR5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 5 A; Terminal Shape: END CAP;
ATDR15
The Mersen S A ATDR15 fuse is a 15A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a rated breaking capacity of 200000A.
ATDR3-2/10
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
ATDR4-1/2
Mersen S A's ATDR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications requiring inline mounting or holder setup. Compliant with CSA and UL standards, its compact size of 10.4mm x 38.1mm makes it versatile for different electrical systems.
ATDR17-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 17.5 A; Terminal Shape: END CAP;
ATDR2-8/10
The Mersen S A ATDR2-8/10 fuse is rated for 600V AC and 300V DC with a current rating of 2.8A. Featuring time delay blow characteristic, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
ATDR1-6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
ATDR1-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved