Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Mersen S A's ATDR1-6/10 fuse, rated 1.6A and 600V AC, features time delay blow characteristic for circuit protection with a high breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in applications requiring inline mounting such as electrical systems compliant with CSA and UL standards.
Median Price
$47.980
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$28.010
1k+ parts
$25.110
10k+ parts
-
Verical
Powertech Controls
$11.080
Nova Conductors
$19.222
Quotebeam
$54.000
VNN
Electronic Supply
Vyrian
Bristol Electronics
Atlantic Semiconductor
Q Components
Bisco
Aztec Data Supply Inc.
$12.450
Corohmni
$15.265
AZTECH Wire
$17.590
$16.890
$16.560
$16.220
Advanced Electronics
$18.360
Continental Prestige Electronics
$18.838
Neutron USA
$89.990
Argo Parts USA
This high rated AC voltage makes the fuse suitable for use in applications where high voltage protection is needed.
The compact size of the fuse allows for easy installation in tight spaces without taking up too much room.
The end cap terminal shape ensures a secure connection and reliable performance in the circuit.
The dimensions of the fuse make it compatible with standard fuse holders and easy to replace when needed.
The height of the fuse allows for adequate protection of the circuit components within the limited space.
The rated current of the fuse ensures protection against overcurrent situations without compromising the circuit's performance.
The time delay blow characteristic allows for temporary inrush currents to pass without tripping the fuse, providing added protection.
Being an electric fuse, it offers reliable protection against overloads and short circuits in the electrical system.
The high rated breaking capacity ensures that the fuse can safely interrupt current flow in case of a fault, protecting the circuit components.
The rated DC voltage makes the fuse suitable for DC applications where protection against high voltage is critical.
The fuse can be mounted in-line or in a holder, providing flexibility in installation options based on the application requirements.
The fuse complies with industry standards set by CSA and UL, ensuring its quality, reliability, and safety in electrical systems.
Fuses ATDR1-6/10 attributes and parameters. Explore more Fuses devices from Mersen S A
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Reference Standard:
Terminal Shape:
Mounting Feature:
ATDR1-6/10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Today, the industries are facing major technological challenges, to improve their competitiveness in their markets, but also to contribute to a world that is more respectful of the environment and its resources. We are convinced that technological innovation is essential in order for high-tech industries in energy, electronics or transportation to progress and reinvent themselves for the benefit of all. We have been offering our expertise with the same high standards and relevance for more than 130 years, all over the world, because we want to achieve shared and sustainable development. Where technology is advancing and innovating, you will always find a bit of Mersen.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Won-top Electronics
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
FDLL4148
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
FNQ-R-4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
LP-CC-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 4 A; Terminal Shape: END CAP;
ERBRD3R00X
Panasonic
Panasonic ERBRD3R00X fuse, 0402 size, rated 3A current with fast blow characteristic. Ideal for electric circuit protection in surface mount applications. Operating temp range -40 to 125°C, rated DC voltage of 32V and breaking capacity of 35A. CUL and UL certified for quality assurance.
0458007.DR
Littelfuse
0458007.DR by Littelfuse is a NANO fuse with 7A rated current, 63V DC voltage, and 20.48J nominal joule integral. It is used for circuit protection in applications requiring a trip time of 5s, such as automotive electronics and industrial equipment.
SP/LPJ-10SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
BK-MDL-5-R
Eaton Corporation
The Eaton BK-MDL-5-R fuse is a 5A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 200A and nominal joule integral of 32J, it's ideal for inline mounting in various applications requiring circuit protection. Compliant with CE, CSA, and UL standards, it comes in a compact size of 6.4x31.7mm for efficient use.
TCF60RN
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: TAB/BLADE;
JTD1.25ID
Littelfuse JTD1.25ID fuse, rated 1.25A with time delay blow characteristic, suitable for electric circuit protection at 600V AC and 300V DC. Features indicator and high breaking capacity of 200kA. Commonly used in inline/holder mounting applications.
DFJ-40
DFJ-40 by Eaton Corp is a 40A fast blow electric fuse with 600V AC and 450V DC ratings. Measuring 26.92mm x 60.45mm, it features END CAP terminals and a breaking capacity of 200kA. Ideal for inline mounting, it meets CSA and UL standards for circuit protection applications.
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
FRN-R-3.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 35 A; Terminal Shape: END CAP;
TCF70
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
JJS-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
ATM-30
Eaton Corporation's ATM-30 fuse, with 30A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it has a tin terminal finish and UL reference standard. Ideal for circuit protection in applications requiring inline mounting or holder installation at temperatures ranging from -40°C to 100°C.
KTK-1/2
Eaton Corporation's KTK-1/2 fuse, rated at 500V AC/0.5A, features fast blow characteristic and nickel terminal finish. With a compact size of 10.3mm x 38.1mm, it is ideal for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CE, CSA, and UL standards, it comes in a box packing method for easy installation.
0451.160MRL
0451.160MRL by Littelfuse is a NANO fuse with 0.16A rated current and 125V DC voltage, suitable for electric circuit protection. It has a very fast blow characteristic and a rated breaking capacity of 50A, making it ideal for surface mount applications in various industries. With dimensions of 6.1mm x 2.69mm x 2.69mm, this fuse operates b/w -55°C to 125°C temperatures according to CSA and UL standards.
SP/LPJ-125SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
The Eaton Corporation JJS-60 fuse, rated at 600V and 60A with a very fast blow characteristic, is ideal for electric circuit protection. With a compact body size of 20.6mm x 39.7mm and mounting feature for inline/holder use, it meets CE, CSA, and UL standards.
ANL-80
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
0273.500H
Littelfuse 0273.500H is a MICRO fuse with 0.5A rated current, 125V AC/DC voltage, and very fast blow characteristic. It has a trip delay of 14400s and nominal joule integral of 0.0716J. Ideal for circuit protection in applications requiring high breaking capacity and through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATDR20
Mersen S A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
ATDR30
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
ATDR10
The Mersen S A ATDR10 fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline mounting feature. Ideal for circuit protection in various applications requiring a high breaking capacity of 200kA.
ATDR4
Mersen S A's ATDR4 fuse, rated 4A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting in various applications meeting CSA and UL standards.
ATDR2-1/2
ATDR2-1/2 by Mersen S A is a 600V, 2.5A time delay fuse with 200kA breaking capacity. It has a body size of 10.4mm x 38.1mm and end cap terminals, suitable for electric circuit protection in various applications requiring inline mounting or holder setups according to CSA and UL standards.
ATDR2-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.25 A; Terminal Shape: END CAP;
ATDR3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3 A; Terminal Shape: END CAP;
ATDR25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
ATDR12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 12 A; Terminal Shape: END CAP;
ATDR1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: .5 A; Terminal Shape: END CAP;
ATDR2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
ATDR3-1/2
ATDR3-1/2 by Mersen S A is a 3.5A time delay fuse with 600V AC and 300V DC ratings. Featuring a blow characteristic of TIME DELAY, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting, it complies with CSA and UL standards for various electrical applications.
ATDR5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 5 A; Terminal Shape: END CAP;
ATDR15
The Mersen S A ATDR15 fuse is a 15A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a rated breaking capacity of 200000A.
ATDR3-2/10
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
ATDR4-1/2
Mersen S A's ATDR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications requiring inline mounting or holder setup. Compliant with CSA and UL standards, its compact size of 10.4mm x 38.1mm makes it versatile for different electrical systems.
ATDR17-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 17.5 A; Terminal Shape: END CAP;
ATDR2-8/10
The Mersen S A ATDR2-8/10 fuse is rated for 600V AC and 300V DC with a current rating of 2.8A. Featuring time delay blow characteristic, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
ATDR1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
ATDR1-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.8 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved