Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Body Width: 51 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fuses LA130URD71IL0160 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Built-in Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
LA130URD71IL0160 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
1554216002
Molex
WIRE AND CABLE;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
M39029/56351
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Toshiba
LP-CC-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 25 A; Terminal Shape: END CAP;
0297005WXNV
Littelfuse
Littelfuse 0297005WXNV fuse with 5A rated current, 25J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring inline mounting, such as automotive electronics and industrial equipment. Operating temperature range from -40°C to 125°C ensures reliable performance in various environments.
LPJ-150SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
FRN-R-6-1/4
Eaton Corporation
Eaton Corporation's FRN-R-6-1/4 fuse, rated 6.25A at 250V AC/125V DC, features RK5 class with time delay blow characteristic. It has a compact body size of 14.22mm x 50.8mm and high breaking capacity of 200kA, suitable for electric circuit protection in various applications.
0001.2534
Schurter Ag
Schurter Ag 0001.2534 fuse, rated 10A with 250V AC & 63V DC, offers time lag blow characteristic and 1500A breaking capacity. Ideal for electric circuit protection in applications requiring a compact 6.3x32mm size fuse with nickel terminal finish and CUL/UL standards compliance.
0451.125MRL
Littelfuse 0451.125MRL is a NANO fuse with 0.125A rated current and 125V DC/AC voltage. It has a very fast blow characteristic, gold terminal finish, and CSA/UL reference standards. Ideal for electric circuit protection in applications requiring surface mounting feature.
ANL-80
ANL-80 by Eaton Corporation is an 81mm x 22.2mm electric fuse with a rated current of 80A and a blow characteristic of time delay. It is commonly used for circuit protection in applications requiring a rated breaking capacity of 2700A and a rated DC voltage of 80V.
FWP-10A14FI
The Eaton Corporation FWP-10A14FI fuse offers 3.6J nominal joule integral, 700V AC/DC rated voltage, and 10A current rating. Ideal for circuit protection in various applications with its built-in indicator feature and high breaking capacity of 200kA. Compliant with CE, IEC, and UL standards for reliable performance.
ERBRD3R00X
Panasonic
Panasonic ERBRD3R00X fuse, 0402 size, rated 3A current with fast blow characteristic. Ideal for electric circuit protection in surface mount applications. Operating temp range -40 to 125°C, rated DC voltage of 32V and breaking capacity of 35A. CUL and UL certified for quality assurance.
LPJ-40SP
Eaton Corporation LPJ-40SP fuse, rated 40A at 600V AC/300V DC with J class and time delay blow characteristic. Measuring 27mm x 60.3mm, it offers circuit protection with a breaking capacity of 300kA. Ideal for inline mounting applications, compliant with CE, CSA, and UL standards.
KTK-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP; Manufacturer Series: KTK;
LP-CC-6-1/4
Eaton Corporation LP-CC-6-1/4 fuse, rated 6.25A and 600V AC, features time delay blow characteristic for electric circuit protection. With a rated breaking capacity of 200kA, it is suitable for inline mounting applications in CE, CSA, and UL compliant systems.
0458010.DR
Littelfuse 0458010.DR is a NANO fuse with 10A rated current, 63V DC voltage, and 15J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount nano-sized fuse with a trip time of 5 seconds. Operating temperature range from -55°C to 125°C makes it suitable for various electronic devices.
LPJ-400SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
C10G32
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 400 V; Rated DC Voltage: 400 V; Rated Current: 32 A; Terminal Shape: END CAP;
ATC-30
Eaton Corporation's ATC-30 fuse, rated at 30A and 32V, offers fast blow characteristic with a trip time of 0.1s. With dimensions of 19.3mm x 5.25mm x 12.5mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 100°C and UL reference standard compliance.
FNQ-R-20
Eaton Corporation's FNQ-R-20 fuse, rated at 20A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline/holder mounting configurations for electrical systems.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
02183.15MXP
Littelfuse 02183.15MXP fuse, rated at 3.15A and 250V, with a trip time of 0.02s, is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a nominal joule integral of 38.15J and is designed for use in inline/holder mounting configurations. Compliant with standards such as CCC, CE, CSA, UL, VDE, it ensures reliable performance in various electronic devices.
0297010.H
Littelfuse 0297010.H is a MINI fuse with 10A rated current, 32V DC voltage, and 122J nominal joule integral. It has a trip time of 0.03s and is used for electric circuit protection in various applications due to its compact size and high breaking capacity.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA130URD71LLI0160
ELECTRIC FUSE; Manufacturer Series: LA;
LA130URD70TTI0100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 100 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
LA130URD70LI0160
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD70TTI0160
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 160 A; Terminal Shape: END CAP; Body Width: 40 inch;
LA130URD70TTI0063
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 63 A; Terminal Shape: END CAP; Body Width: 40 inch;
LA130URD71LLI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Dimensions: 51mm x 51mm x 72.5mm;
LA130URD70LI0080
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD70TTI0125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 125 A; Terminal Shape: END CAP; Nominal Joule Integral: 1.3 J;
LA130URD70LI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 100000 A;
LA130URD70TTI0315
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 315 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
LA130URD70TTI0200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 200 A; Terminal Shape: END CAP; Reference Standard: UL;
LA130URD70LI0315
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 315 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
LA130URD71IL0280
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 280 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 51 mm;
LA130URD70LI0125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 1.3 J;
LA130URD70TTI0080
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 80 A; Terminal Shape: END CAP; Dimensions: 40mm x 40mm x 72.5mm;
LA130URD70LI0063
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE; Rated Breaking Capacity: 100000 A;
LA130URD70LI0100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
LA130URD70LI0250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
LA130URD70TTI0250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1300 V; Rated Current: 250 A; Terminal Shape: END CAP; Body Length/Diameter: 40 mm;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved