Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 25.4 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fuses L17T100 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
L17T100 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148W-T
Rectron
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
AJT50
Mersen S A
AJT50 fuse by Mersen S A is a 50A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. With dimensions of 27mm x 60mm, it features an end cap terminal shape and inline/holder mounting for circuit protection applications requiring a high breaking capacity of 200000A.
0287003.PXCN
Littelfuse
Littelfuse 0287003.PXCN fuse has a Nominal Joule Integral of 7.4 J, Trip Time of 0.08s, and Rated Current of 3A. It is used for circuit protection in applications requiring a rated DC voltage of 32V, with CSA and UL standards compliance.
0218010.MXP
Littelfuse 0218010.MXP fuse, rated at 10A and 250V, with a trip time of 0.02s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Compact size of 5x20mm makes it suitable for inline mounting in various electronic devices.
BK/ATM-30
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0287005.L
Littelfuse 0287005.L fuse has a Nominal Joule Integral of 26 J, Trip Time of 0.08 sec, and Rated Current of 5 A. It is used for circuit protection in applications requiring a rated DC voltage of 32 V, with dimensions of 19.1mm x 5.1mm x 12.3mm and terminal shape TAB/BLADE.
021502.5MXEP
Littelfuse 021502.5MXEP fuse, rated 2.5A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a rated breaking capacity of 1500A at temperatures ranging from -55 to 125°C.
FNQ-R-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
39501600000
39501600000 by Littelfuse is a TE5 fuse with 125V rated voltage, 0.16A current, and 0.0037J nominal joule integral. It is used for circuit protection in applications requiring fast blow characteristic, UL reference standard compliance, and 100A rated breaking capacity.
KTK-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Packing Method: BOX;
PV-6A10-T
Eaton Corporation
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
0251015.MXL
Littelfuse 0251015.MXL is a PICO fuse with 15A rated current, 32V DC voltage, and very fast blow characteristic. Ideal for electric circuit protection in applications requiring a supplemental fuse class with dimensions of 2.8mm x 7.11mm.
KTK-R-15
The Eaton Corporation's KTK-R-15 fuse, rated at 15A and 600V, features fast blow characteristic with a rated breaking capacity of 200kA. This CC class fuse with nickel terminal finish is designed for electric circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method and measures 10.3mm x 38.1mm in dimensions.
63LET
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 240 V; Rated DC Voltage: 150 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE;
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
KTK-R-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
028707.5.PXCN
Littelfuse 028707.5.PXCN fuse with 7.5A rated current, 60J nominal joule integral, and 1000A rated breaking capacity. Ideal for electric circuit protection in applications requiring a fuse with dimensions of 19.1mm x 5.1mm x 12.3mm and operating temperatures from -40°C to 105°C.
0ATO07.5V
Littelfuse 0ATO07.5V fuse with 7.5A rated current, 60J nominal joule integral, and 0.1s trip time is ideal for electric circuit protection. With a rated breaking capacity of 1000A and operating temperatures from -40°C to 125°C, it suits various applications requiring inline mounting in CSA/UL compliant systems.
0215016.MXEP
Littelfuse 0215016.MXEP fuse, rated at 16A and 250V, with a trip time of 0.01s. Ideal for circuit protection in applications requiring a time lag blow characteristic. Measuring 5x20mm, it has a pre arcing rating of 1408 A2/s and meets IEC, PSE, and UL standards.
FNQ-R-1-4/10
Eaton Corporation's FNQ-R-1-4/10 fuse, rated at 1.4A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for electric circuit protection in various applications with a high breaking capacity of 200kA.
LP-CC-4
LP-CC-4 by Eaton Corp is a 4A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10mm in body length, it features an end cap terminal shape and inline mounting for circuit protection applications. Compliant with CE, CSA, and UL standards, it offers a high breaking capacity of 200kA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L17T150V
ELECTRIC FUSE; Rated Current: 150 A; Rated Voltage: 170 V; Dimensions: 25.4mm x 29.4mm; Body Height: 29.4 mm; Reference Standard: CE, CSA, UL;
L17T1100V
ELECTRIC FUSE; Rated Current: 1100 A; Rated Breaking Capacity: 100000 A; Rated Voltage: 170 V; Body Height: 34 mm; Reference Standard: CE, CSA, UL;
L17T150
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE; Dimensions: 25.4mm x 29.4mm;
L17T1200V
ELECTRIC FUSE; Rated Current: 1200 A; Body Height: 34 mm; Reference Standard: CSA; UL; Body Length/Diameter: 103.1 mm; Rated Voltage: 170 V;
L17T100V
ELECTRIC FUSE; Rated Current: 100 A; Body Height: 29.4 mm; Dimensions: 25.4mm x 29.4mm; Rated Breaking Capacity: 100000 A; Rated Voltage: 170 V;
L17T175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
L17T070.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE; Packing Method: BULK;
L17T1200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 1200 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 170 VDC: 100000 A;
L17T1000
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 1000 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 170 VDC: 100000 A;
L17T125V
ELECTRIC FUSE; Rated Current: 125 A; Reference Standard: CE, CSA, UL; Body Length/Diameter: 25.4 mm; Rated Breaking Capacity: 100000 A; Body Height: 29.4 mm;
L17T125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Body Height: 29.4 mm;
L17T100.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE; Body Height: 29.4 mm;
L17T150.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE; Body Height: 29.4 mm;
L17T090.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 90 A; Terminal Shape: TAB/BLADE; Reference Standard: CSA; UL;
L17T1100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 1100 A; Terminal Shape: TAB/BLADE; Dimensions: 34mm;
L17T070
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE; Body Height: 29.4 mm;
L17T090
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 90 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 25.4 mm;
L17T1000V
ELECTRIC FUSE; Rated Current: 1000 A; Body Height: 34 mm; Rated Voltage: 170 V; Reference Standard: CE, CSA, UL; Rated Breaking Capacity: 100000 A;
L17T125.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 170 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE; Packing Method: BULK;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved