Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
Median Price
$1.280
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Wes Garde
1+ parts
$0.300
100+ parts
-
1k+ parts
10k+ parts
Walker Industrial
$0.450
Arrow
$0.923
Farnell
$1.000
$0.644
$0.610
Relay Specialties
$1.060
$0.830
Mouser Electronics
RS (Exports)
$1.320
Sager
$1.370
$1.200
$1.170
Master Electronics
$1.485
$1.350
$1.140
$1.080
Newark
$1.750
$1.490
$1.400
RS Americas
$2.260
$1.810
Element14
$2.380
$2.170
$1.770
$1.740
IEC Supply
$6.950
Chip1Stop
$1.010
Verical
TTI
$1.110
Electro Enterprises
$0.373
$0.262
$0.223
$0.241
Carlton-Bates
$0.810
Nova Conductors
$0.949
Galco
$0.960
Hutch & Son
DF Sales Co.
R&J Components
VNN
Rapid Electronics
$1.039
Bisco
Vyrian
Flex Direct, LLC
Bristol Electronics
Powertech Controls
IBS Electronics
$0.910
EMSNET
Argo Parts USA
Bastille Electronics
$0.902
$0.856
$0.845
Continental Prestige Electronics
$1.560
$1.190
$0.944
Authorized Procurement Solutions
GreenTree Electronics
Standard Data Resources (Excess)
Perfect Parts
Fuses AGC-1-R attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
AGC-1-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - AGC, AGX Glass Tube Fuses 26/Oct/2012
PCN Packaging - Shipping Box and Labels 05/Jan/2018
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
1N4148WT
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Rfe International
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LPJ-60SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
PV-20A10F
Eaton Corporation
Eaton Corporation's PV-20A10F fuse, rated at 20 A and 1000 V DC, offers a nominal joule integral of 34 J with a body size of 10x38mm. With a rated breaking capacity of 50000 A, it is suitable for circuit protection in various applications due to its wide operating temperature range (-40 to 90 °C) and compliance with CCC, IEC, and UL standards.
ATQR4/10
Mersen S A
Mersen S A's ATQR4/10 fuse, rated 0.4A and 600V, features a time delay blow characteristic. With a compact body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation at temperatures up to 80°C. Compliant with CSA, CE, and UL standards.
AJT200/400
AJT200/400 by Mersen S A is a J-class fuse with 200A rated current and 600V AC/DC voltage. Featuring time lag blow characteristic, it offers 200000A breaking capacity. Ideal for electric circuit protection in various applications compliant with IEC and UL standards.
KTK-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
BK-MDL-2-R
BK-MDL-2-R by Eaton Corp is a 250V, 2A time delay electric fuse with 62.3J nominal joule integral. Measuring 6.4x31.7mm, it has a rated breaking capacity of 100A and terminal finish in Ni. Ideal for inline mounting applications, it conforms to CE, CSA, and UL standards for reliable circuit protection.
ATDR2-8/10
The Mersen S A ATDR2-8/10 fuse is rated for 600V AC and 300V DC with a current rating of 2.8A. Featuring time delay blow characteristic, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
FNM-2-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
0452005MRL
Littelfuse
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
LP-CC-1-6/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
AJT200
AJT200 by Mersen S A is a 200A time delay electric fuse with 600V AC and 500V DC ratings. Featuring TAB/BLADE terminals, it has a body size of 41mm x 76mm x 146mm. Ideal for inline mounting, it offers a high breaking capacity of 200000 A and includes an indicator for easy monitoring.
FNQ-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
3413.0214.22
Schurter Ag
Schurter Ag's 3413.0214.22 fuse, rated at 0.63A and 32V, features a very fast blow characteristic with dimensions of 3.2mm x 1.6mm x 0.6mm. Ideal for circuit protection in electronics, it has a pre-arcing rating of 0.076 A2/s and operates b/w -55°C to 90°C temperatures.
04661.25NRHF
Littelfuse 04661.25NRHF is a 1.25A fast-acting electric fuse with 63V rated voltage and 0.064J nominal joule integral. It is a surface mount 1206 size fuse suitable for supplemental circuit protection applications requiring quick response time of 0.2 seconds.
LP-CC-2-8/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.8 A; Terminal Shape: END CAP;
FWS-10A20FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1400 V; Rated DC Voltage: 1000 V; Rated Current: 10 A; Terminal Shape: END CAP;
520.527
Eska Erich Schweizer
520.527 fuse by Eska Erich Schweizer is a 5x20mm electric fuse with a rated current of 10A and rated AC voltage of 250V. With a blow characteristic of VERY FAST, it offers circuit protection with a nominal joule integral of 204.4J. Ideal for inline mounting, it has a rated breaking capacity of 1500A and min pre-arcing time of 3ms, meeting CE, CUL, IEC, and UL standards.
0453001MR
Littelfuse 0453001MR NANO fuse with 1A current rating and 125V AC/DC voltage. Very fast blow characteristic, 0.459J joule integral, suitable for electric circuit protection in various applications. TR packing method, CSA/PSE/UL standards compliant, surface mountable with wraparound terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AGC-10-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
ELECTRIC FUSE; Rated Current: 10 A; Terminal Shape: END CAP; Reference Standard: CSA; UL; Body Height: 31.75 mm; Blow Characteristic: FAST;
AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Additional Features: PRE ARCHING TIME: OPEN WITHIN 120 SEC AT 200% RATED CURRENT;
AGC-12-R
ELECTRIC FUSE; Rated Current: .5 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm; Reference Standard: CSA, UL; Blow Characteristic: FAST;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP; Rated Voltage: 32 V;
AGC-1/2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
AGC-1-1/2-R
Eaton Corporation's AGC-1-1/2-R fuse, rated at 1.5A and 250V, offers fast blow characteristic with a pre-arcing rating of 0.0149 A2/s. With dimensions of 6.35x31.75mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and a rated breaking capacity of 100A.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Body Height: 31.75 mm;
AGC-14-R
AGC-14-R by Eaton Corporation is a 6.3x32mm fast blow electric fuse with a rated current of 14A and rated AC voltage of 32V. It has an inline/holder mounting feature and is suitable for circuit protection in various applications.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 14 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm;
AGC-1/4-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
AGC-15-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: END CAP; Body Length/Diameter: 6.35 mm;
ELECTRIC FUSE; Rated Current: 15 A; Terminal Shape: END CAP; Dimensions: 6.35mm x 31.75mm; Rated Breaking Capacity: 1000 A; Reference Standard: CSA, UL;
AGC-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Dimensions: 6.3mm x 32mm;
AGC-1 fuse by Eaton Corp. features 1A current rating, 250V AC voltage, and 6.3x32mm size. Ideal for circuit protection in applications requiring fast blow characteristic and rated breaking capacity of 35A. Compliant with CSA and UL standards, suitable for inline mounting in various electronic devices.
AGC-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Body Height: 31.75 mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
AGC-14
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 14 A; Terminal Shape: END CAP; Rated Breaking Capacity: 1000 A;
AGC1
AGC1 fuse by Littelfuse is a 3AG size electric fuse with a rated current of 1A and a rated voltage of 32V. It is commonly used for circuit protection in applications requiring inline or holder mounting, such as automotive and electronic devices.
AGC-1/20-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: END CAP; Nominal Joule Integral: .00773 J;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved