Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Mersen S A ATM10 fuse is a 10A, 600V fast-blow electric fuse with a midget size and end cap terminal shape. It has a rated breaking capacity of 100kA and is suitable for inline/holder mounting in various applications requiring circuit protection. Compliant with CSA and UL standards, it measures 10mm x 38mm.
Median Price
$3.260
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Wes Garde
1+ parts
$0.210
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$1.310
Airline Hydraulics
$2.680
Heilind Electronics
$3.043
$2.509
$2.383
Newark
$3.340
RS Americas
$3.850
$3.510
$3.390
Element14
$4.370
Mouser Electronics
$4.980
$3.230
$3.170
$2.660
TTI
Master Electronics
$19.610
$16.100
Verical
Arrow
$1.836
TEDSS.com
$1.000
$0.590
Nova Conductors
$1.810
Hutch & Son
Galco
$1.950
Carlton-Bates
$2.350
Forefront Electronics and Design
$12.250
Kempston Controls
$12.930
Component Electronics Inc.
$19.230
$14.420
$12.500
Quotebeam
$21.770
VNN
Electronic Supply
Vyrian
GSS - Global Semi Support
LWI Electronics Inc
Elcom Components
Q Components
North Shore Components
Bristol Electronics
Prism Electronics
Electro Sonic
$17.650
$16.480
IBS Electronics
$27.650
$22.701
Powertech Controls
Sunrise Surplus Inc.
DF Sales Co.
Bisco
Semicontronic
$0.178
$0.174
$0.173
Argo Parts USA
Continental Prestige Electronics
$1.774
Component Stockers USA
$3.320
$2.160
$1.970
Allen Electronics Distributors
$3.630
$3.310
Aztec Data Supply Inc.
$5.321
Corohmni
$14.729
Advanced Electronics
$17.075
$15.709
$14.720
Neutron USA
$74.990
Authorized Procurement Solutions
Glotronic Ltd.
Netroflash
$1.719
$1.683
Perfect Parts
EMSNET (Excess)
High rated AC voltage allows for use in a variety of applications without the risk of overload or short circuit.
Consistent rated voltage ensures stable performance and protection for electrical circuits.
A high rated current of 10A provides sufficient protection for circuits handling moderate to high levels of current.
Fast blow characteristic ensures quick response to overcurrent or short circuit situations, effectively protecting the circuit.
High rated breaking capacity ensures that the fuse can safely handle high fault currents without failing or causing damage.
Inline or holder mounting feature provides flexibility in installation options, making it easier to integrate the fuse into various systems.
Compliance with CSA and UL standards ensures that the fuse meets industry safety and performance requirements, providing peace of mind to users.
Fuses ATM10 attributes and parameters. Explore more Fuses devices from Mersen S A
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Additional Features:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
ATM10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5920-00-296-0454, 5920002960454, 5920-00-927-5567, 5920009275567, 5920-01-463-4792, 5920014634792, 5920-01-414-6439, 5920014146439, 5920-01-565-7220, 5920015657220, 5920-01-556-4819, 5920015564819
NIIN
002960454, 009275567, 014634792, 014146439, 015657220, 015564819
Today, the industries are facing major technological challenges, to improve their competitiveness in their markets, but also to contribute to a world that is more respectful of the environment and its resources. We are convinced that technological innovation is essential in order for high-tech industries in energy, electronics or transportation to progress and reinvent themselves for the benefit of all. We have been offering our expertise with the same high standards and relevance for more than 130 years, all over the world, because we want to achieve shared and sustainable development. Where technology is advancing and innovating, you will always find a bit of Mersen.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Weitron Technology
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Secos
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
TCF70
Cooper Industries
The TCF70 by Cooper Industries is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and a minimum operating temperature of -10°C. The fuse has a body length/diameter of 76.45mm, a body width of 25.4 inch, and a body height of 32mm. It has a tin terminal finish and a rated breaking capacity of 300000A. The TCF70 is suitable for applications that require circuit protection in systems with a maximum operating temperature of 65°C and a rated DC voltage of 300V.
JJS-50
Eaton Corporation
Eaton Corporation's JJS-50 fuse, rated at 50A and 600V AC, features a very fast blow characteristic with a breaking capacity of 200kA. With dimensions of 20.6mm x 39.7mm and end cap terminals, it is commonly used for electric circuit protection in various applications compliant with CE, CSA, and UL standards.
FWP-25A14F
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 25 A; Terminal Shape: END CAP;
FNQ-1/2
FNQ-1/2 by Eaton Corp is a 500V, 0.5A time delay fuse with 10000A breaking capacity. Inline mounting feature and end cap terminal shape make it ideal for electric circuit protection in various applications. Compliant with CSA and UL standards, it comes in bulk packing with dimensions of 10.3mm x 38.1mm.
ATDR1/4
Mersen S A
Mersen S A's ATDR1/4 fuse, rated 0.25A and 600V AC, features time delay blow characteristic. With a body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA such as inline mounting systems compliant with CSA and UL standards.
0297010WXNV
Littelfuse
Littelfuse 0297010WXNV fuse has 93J nominal joule integral, 10A rated current, and 32V DC voltage. With dimensions of 10.9mm x 3.8mm x 8.8mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C and min of -40°C.
0219002.MXAEP
Littelfuse 0219002.MXAEP fuse, rated at 2A and 250V, offers a time lag blow characteristic with a trip delay of 0.02s. With a nominal joule integral of 92.705J, it is ideal for circuit protection in applications requiring an electric fuse with dimensions of 5x20mm and terminal shape PIN WIRE.
LPJ-10SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
BK/ATC-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
ATQR20
Mersen S A's ATQR20 fuse, rated 20A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 10.4mm x 38.1mm and end cap terminal shape, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting applications in various industries like automotive and electronics.
FNQ-R-1-4/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.4 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0466.750NR
Littelfuse 0466.750NR is a 1206 size fuse with 0.75A rated current and 63V rated voltage. It offers very fast blow characteristic, 0.2s trip time, and 0.0276J nominal joule integral. Ideal for electric circuit protection in applications requiring surface mount fuses with CSA and UL standards compliance.
LKN-100
ELECTRIC FUSE;
170M3744
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
KTK-R-10
Eaton Corporation's KTK-R-10 fuse, rated at 10A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, it comes in a box packing method.
0218.063MXP
Littelfuse 0218.063MXP fuse, rated at 0.063A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C.
0218001.MXP
Littelfuse 0218001.MXP fuse has a rated current of 1A and trip time of 0.02s, suitable for circuit protection in applications with 250V AC voltage. With a blow characteristic of TIME LAG, it offers a pre arcing rating of 6.73 A2/s and is compatible with various reference standards like CCC, CE, CSA, UL.
SC-40
Eaton Corporation's SC-40 fuse, rated at 40A and 480V, features a G class with fast and time delay blow characteristic. With a rated breaking capacity of 100kA, it is ideal for electric circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA and UL standards, the fuse comes in a box packing method.
0217.630MXP
Littelfuse 0217.630MXP fuse, rated at 0.63A and 250V, features a very fast blow characteristic with a trip time of 0.01s. Measuring 5x20mm, it is used for electric circuit protection in various applications with an operating temperature range from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
ATM15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATM;
Eaton Corporation's ATM-10 fuse, with 10A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications due to its high breaking capacity of 1000A and UL reference standard compliance.
ATM-10LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Dimensions: 10.9mm x 3.81mm x 8.73mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
ATM1
Mersen S A's ATM1 fuse, rated at 1A and 600V, features a fast blow characteristic with a breaking capacity of 100kA. Measuring 10mm x 38mm, it is a MIDGET size fuse with END CAP terminals. Ideal for circuit protection in applications requiring inline mounting or holder installation per CSA and UL standards.
ATM1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
ATM1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP;
ATM1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: .5 A; Terminal Shape: END CAP;
ATM1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP;
ATM1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: .125 A; Terminal Shape: END CAP;
ATM12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved