Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; JESD-609 Code: e3;
Median Price
$3.260
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Wes Garde
1+ parts
$0.210
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$1.310
Airline Hydraulics
$2.680
Heilind Electronics
$3.043
$2.509
$2.383
Newark
$3.340
RS Americas
$3.850
$3.510
$3.390
Element14
$4.370
Mouser Electronics
$4.980
$3.230
$3.170
$2.660
TTI
Master Electronics
$19.610
$16.100
Verical
Arrow
$1.836
TEDSS.com
$1.000
$0.590
Nova Conductors
$1.810
Hutch & Son
Galco
$1.950
Carlton-Bates
$2.350
Forefront Electronics and Design
$12.250
Kempston Controls
$12.930
Component Electronics Inc.
$19.230
$14.420
$12.500
Quotebeam
$21.770
VNN
Electronic Supply
Vyrian
GSS - Global Semi Support
LWI Electronics Inc
Elcom Components
Q Components
North Shore Components
Bristol Electronics
Prism Electronics
Electro Sonic
$17.650
$16.480
IBS Electronics
$27.650
$22.701
Powertech Controls
Sunrise Surplus Inc.
DF Sales Co.
Bisco
Semicontronic
$0.178
$0.174
$0.173
Argo Parts USA
Continental Prestige Electronics
$1.774
Component Stockers USA
$3.320
$2.160
$1.970
Allen Electronics Distributors
$3.630
$3.310
Aztec Data Supply Inc.
$5.321
Corohmni
$14.729
Advanced Electronics
$17.075
$15.709
$14.720
Neutron USA
$74.990
Authorized Procurement Solutions
Glotronic Ltd.
Netroflash
$1.719
$1.683
Perfect Parts
EMSNET (Excess)
Fuses ATM-10 attributes and parameters. Explore more Fuses devices from Cooper Industries
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Additional Features:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
ATM-10 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Eic Semiconductor
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
0453003.MR
Littelfuse
Littelfuse 0453003.MR fuse, rated at 125V and 3A, offers very fast blow characteristic with a trip time of 5s. Nano-sized with dimensions of 6.1mm x 2.69mm x 2.69mm, it is ideal for circuit protection in applications requiring surface mounting method and wraparound terminal shape.
ANL-250
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 80 V; Rated Current: 250 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
AJT200
Mersen S A
AJT200 by Mersen S A is a 200A time delay electric fuse with 600V AC and 500V DC ratings. Featuring TAB/BLADE terminals, it has a body size of 41mm x 76mm x 146mm. Ideal for inline mounting, it offers a high breaking capacity of 200000 A and includes an indicator for easy monitoring.
BK/ATC-25
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE;
ATDR30
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
KTK-10
Eaton Corporation
Eaton Corporation's KTK-10 fuse, rated at 10A and 600V, features fast blow characteristic with a breaking capacity of 100kA. With CE, CSA, and UL certifications, it is ideal for electric circuit protection in applications requiring inline mounting or holder installation.
021501.6MXEP
Littelfuse 021501.6MXEP fuse, rated 1.6A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is ideal for circuit protection in applications requiring a rated breaking capacity of 1500A at temperatures ranging from -55 to 125°C.
ATDR1-6/10
Mersen S A's ATDR1-6/10 fuse, rated 1.6A and 600V AC, features time delay blow characteristic for circuit protection with a high breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in applications requiring inline mounting such as electrical systems compliant with CSA and UL standards.
FNQ-7
FNQ-7 fuse by Eaton Corp, rated 7A & 500V, with time delay blow characteristic. MIDGET size, CC class fuse with 10.3mm x 38.1mm dimensions for inline mounting applications in CE/CSA/UL compliant circuits.
FRS-R-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
39501600000
39501600000 by Littelfuse is a TE5 fuse with 125V rated voltage, 0.16A current, and 0.0037J nominal joule integral. It is used for circuit protection in applications requiring fast blow characteristic, UL reference standard compliance, and 100A rated breaking capacity.
0313025.MXP
Littelfuse 0313025.MXP fuse, rated at 25A and 250V, offers a time lag blow characteristic with a trip delay of 5s. With a nominal joule integral of 16500J, it is ideal for circuit protection in applications requiring supplemental fuses with a rated AC voltage of up to 32V.
KTK-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 20 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
FNQ-R-3-1/2
Eaton Corporation's FNQ-R-3-1/2 fuse, rated at 3.5A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
FNQ-R-12
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
ATQR15
The Mersen S A ATQR15 fuse is a 15A electric fuse with a rated AC voltage of 600V and rated breaking capacity of 200kA. Featuring time delay blow characteristic, it has dimensions of 10.4mm x 38.1mm and terminal shape END CAP. Ideal for circuit protection in applications requiring inline/holder mounting at temperatures up to 80°C.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE;
BK-MDL-1-R
The Eaton Corporation BK-MDL-1-R fuse, with 250V AC voltage and 1A current rating, offers time delay blow characteristic. Measuring 6.4x31.7mm, it has a rated breaking capacity of 35A and is suitable for inline mounting applications in CE, CSA, and UL compliant systems.
BK/ATC-30
BK/ATC-30 by Eaton Corp is a 30A fast blow electric fuse with 32V AC/DC rated voltage. Measuring 19.3mm x 5.25mm x 12.5mm, it has a trip time of 0.1s and UL certification. Ideal for inline mounting in circuits requiring quick protection at temperatures ranging from -40°C to 100°C.
0216001MXP
0216001MXP by Littelfuse is a 5x20mm fuse with a rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.18J, rated AC voltage of 250V, and trip time of 0.01s. Ideal for circuit protection in applications requiring electric fuses with a max operating temperature of 125°C and reference standards including CCC, CE, CSA, PSE, UL, VDE.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Height: 8.81 mm;
ATM15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Dimensions: 10.92mm x 3.81mm x 8.81mm;
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATM;
ATM10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP;
Eaton Corporation's ATM-10 fuse, with 10A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications due to its high breaking capacity of 1000A and UL reference standard compliance.
ATM-10LP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Dimensions: 10.9mm x 3.81mm x 8.73mm;
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Minimum Operating Temperature: -40 Cel;
ATM1
Mersen S A's ATM1 fuse, rated at 1A and 600V, features a fast blow characteristic with a breaking capacity of 100kA. Measuring 10mm x 38mm, it is a MIDGET size fuse with END CAP terminals. Ideal for circuit protection in applications requiring inline mounting or holder installation per CSA and UL standards.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved