Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IXTP05N100M by Littelfuse is a N-CHANNEL FET with 1000V DS Breakdown Voltage, 3A IDM, and 17 ohm RDS(on). Ideal for power applications requiring high voltage tolerance and low on-resistance. Suitable for use in circuits where efficient power management is crucial.
Median Price
$6.010
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.880
1k+ parts
$2.397
10k+ parts
-
Mouser Electronics
$2.650
$2.440
Nova Conductors
$2.180
Ozdisan Elektronik
$3.523
SPM Sales
Vyrian
IBS Electronics
$3.849
$3.722
$3.680
NAC Semi
$8.130
Ack Elektronik San.Tic.Ltd.Sti
Component Stockers USA
$3.610
$2.510
Ampacity Inc.
$3.630
AZTECH Wire
$14.450
$13.880
$13.600
$13.330
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Netroflash
$2.136
$2.071
$2.027
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
The use of plastic/epoxy material makes the package lightweight and durable, ideal for applications where weight and durability are important factors.
With a high minimum breakdown voltage, this FET can handle high voltage applications with ease, providing reliable performance and protection against voltage spikes.
The high power dissipation rating allows the FET to handle high power loads without overheating, ensuring stability and longevity in demanding applications.
With a high maximum operating temperature, this FET can withstand elevated temperatures without compromising performance, making it suitable for high-temperature environments.
The low on-resistance helps reduce power losses and improve efficiency in the FET, making it an ideal choice for applications where low power consumption is a priority.
Power Field Effect Transistors (FET) IXTP05N100M attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Littelfuse
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
IXTP05N100M Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Rugao Dachang Electronic
General Semiconductor
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
IRLML5203TRPBF
Infineon's IRLML5203TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 24A IDM, and 0.098 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it's ideal for power management in various electronic devices.
FDT439N
FDT439N by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features a single configuration with built-in diode, capable of handling 20A IDM and 6.3A ID. With an operating temperature of up to 150°C, this MOSFET in PLASTIC/EPOXY package is suitable for various high-power electronic designs.
FDB33N25TM
FDB33N25TM by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage and 33A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 132A Pulsed Drain Current, and 0.094 ohm On Resistance. The transistor operates in ENHANCEMENT MODE with a max power dissipation of 235W in a small outline package style.
IRF530PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Case Connection: DRAIN; JESD-609 Code: e3;
FDMC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: S-PDSO-F5;
FDS3672
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
IRFP460
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain Current (ID): 20 A; No. of Terminals: 3;
FDMS86252L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Case Connection: DRAIN; No. of Elements: 1;
IRF530A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; JESD-609 Code: e3; Maximum Operating Temperature: 175 Cel;
BSC067N06LS3GATMA1
BSC067N06LS3GATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 200A IDM, 47mJ EAS, and 0.0067 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and SILICON element material.
IRFR5305TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Package Style (Meter): SMALL OUTLINE; Moisture Sensitivity Level (MSL): 1;
PMV40UN2R
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 5 W; No. of Elements: 1; Reference Standard: IEC-60134;
IRLML9301TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: Matte Tin (Sn);
Vishay Intertechnology
Vishay Intertechnology's IRFP460 is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 80A IDM, 960mJ EAS, and 0.27 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 280W at up to 150°C.
IRF9358TRPBF
IRF9358TRPBF by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage and 73A IDM. Ideal for SWITCHING applications, it features a 0.0163 ohm Drain-Source On Resistance and operates in ENHANCEMENT MODE at up to 150°C.
AUIRF3205ZSTRL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Drain Current (ID): 75 A; Operating Mode: ENHANCEMENT MODE;
BBS3002-DL-1E
BBS3002-DL-1E by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, 400A IDM, and 0.009 ohm RDS(on). Ideal for power management applications due to its high drain current capacity and low on-resistance. Suitable for surface mount designs in various electronic systems requiring efficient power control.
SI7439DP-T1-E3
Vishay Intertechnology's SI7439DP-T1-E3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 50A IDM, 80mJ EAS, and 0.09 ohm Drain-Source On Resistance. Operating at up to 150°C, it has a small outline package style for efficient heat dissipation.
FDS4559_F085
FDS4559_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 60V DS Breakdown Voltage. It features 2 elements with built-in diode, suitable for SWITCHING applications. With 20A IDM and 0.055 ohm RDS(on), it operates in ENHANCEMENT MODE at up to 150°C, making it ideal for high-power electronics.
IRF3710PBF
IRF3710PBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 200W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IXTP08N100D2
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 60 W; Terminal Position: SINGLE; Package Style (Meter): FLANGE MOUNT;
Littelfuse
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 60 W; Transistor Application: AMPLIFIER; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IXTP10P50P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Maximum Drain Current (Abs) (ID): 10 A; Maximum Drain-Source On Resistance: 1 ohm;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Package Shape: RECTANGULAR; JEDEC-95 Code: TO-220AB;
IXTP1N100P
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Additional Features: AVALANCHE RATED; Package Style (Meter): FLANGE MOUNT;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Terminal Position: SINGLE; No. of Elements: 1;
IXTP60N20T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 500 W; Minimum Operating Temperature: -55 Cel; Case Connection: DRAIN;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 500 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
IXTP50N25T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 400 W; Package Body Material: PLASTIC/EPOXY; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 400 W; Maximum Pulsed Drain Current (IDM): 130 A; Maximum Drain Current (ID): 50 A;
IXTP76P10T
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Terminal Position: SINGLE; JESD-30 Code: R-PSFM-T3;
IXTP02N120P
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Maximum Pulsed Drain Current (IDM): .6 A; Terminal Form: THROUGH-HOLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Maximum Drain-Source On Resistance: .075 ohm; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
IXTP96P085T
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Terminal Position: SINGLE; Transistor Application: SWITCHING;
IXTP96P085T by IXYS Corporation is a P-CHANNEL power FET with a min DS breakdown voltage of 85V. It has a max pulsed drain current of 300A and an avalanche energy rating of 1000mJ. This transistor is commonly used for switching applications.
IXTP3N120
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSFM-T3; Maximum Drain Current (ID): 3 A; Transistor Element Material: SILICON;
IXTP3N120 by Littelfuse is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 12A IDM, 700mJ EAS, and operates in ENHANCEMENT MODE. With a max power dissipation of 200W and operating temperature up to 150°C, it offers reliable performance in various high-power circuits.
IXTP1R6N100D2
IXTP1R6N100D2 by Littelfuse is a N-CHANNEL FET with 100W power dissipation, -55 to 150°C operating temp range, and 10Ω max drain-source resistance. Ideal for amplifier applications due to its depletion mode operation and built-in diode in a rectangular package with through-hole terminals.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved