Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$6.910
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
$6.264
100+ parts
$3.935
1k+ parts
$3.746
10k+ parts
$3.637
Mouser Electronics
$6.610
$4.460
$4.020
-
Newark
$7.210
$4.670
$4.320
DigiKey
$7.350
$4.790
$4.328
Analog Devices Inc
Arrow
$2.963
$2.934
Nova Conductors
$3.784
Digiode
$4.816
Vyrian
Chip Stock
Anansix
Semtec, LLC
Bristol Electronics
Ampacity Inc.
$2.540
Semicontronic
$2.476
$2.464
Argo Parts USA
Modulus Dynamics
$4.201
$4.159
$4.033
Corphita
$4.563
Vigor
$5.280
Continental Prestige Electronics
$5.670
$4.170
$2.990
Component Stockers USA
$6.300
$4.630
$3.170
$3.050
MARBEL Systems
$8.748
Parana Technologies
$9.592
$8.921
Texas Native Microelectronics
$10.055
$9.653
$9.351
$8.848
IDEA Electronic Components Group
$10.314
$9.798
Kenton Components
$12.066
$10.618
DigiPath Technology Company
$16.090
$15.446
Corohmni
$16.238
Aztec Data Supply Inc.
$17.090
Advanced Electronics
$17.644
$16.762
Qasali Group International
$27.148
$25.248
$23.891
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Netroflash
$3.709
$3.595
$3.520
Perfect Parts
Robosynatics
Lucentia Tech
$0.434
Futuretech Components
Network Interfaces LTC2875HS8#PBF attributes and parameters. Explore more Network Interfaces devices from Linear Technology
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LTC2875HS8#PBF Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Laser Top Mark 16/Jun/2021 Mult Dev 12/Oct/2022
PCN Assembly/Origin - Mult Dev Wafer Site Chg 31/Jul/2020
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Microsemi
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Kec
Weitronic Enterprise
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BAV99WT1G
Fairchild Semiconductor
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
M39029/58360
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
TJA1021T/10/C,118
NXP Semiconductors
NXP Semiconductors' TJA1021T/10/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40°C to 150°C, ideal for automotive applications. The package is small outline, surface mountable, and AEC-Q100 compliant.
AR8031-AL1B-R
Qualcomm Atheros
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
DP83848QSQX/NOPB
DP83848QSQX/NOPB by Texas Instruments is an Ethernet transceiver with a data rate of 100000 Mbps. It operates at temperatures ranging from -40 to 105 °C and has a supply voltage of 3.3 V. This network interface IC is designed for industrial applications, featuring a CMOS technology and a compact square package style suitable for surface mount assembly.
DP83869HMRGZR
DP83869HMRGZR by Texas Instruments is an Ethernet transceiver IC with 1.1V supply voltage and 1000000 Mbps data rate. It operates in automotive temperature grade range of -40 to 125 °C, suitable for network interfaces in automotive applications. The chip carrier package has 48 terminals, nickel/palladium/gold/silver finish, and is surface mountable with a square shape.
MCP2542FD-E/MF
Microchip Technology
MCP2542FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C temperature range and requires 5V nominal voltage. The package style is small outline, heat sink/slug, very thin profile with matte tin terminal finish.
NTS0104BQ,115
NTS0104BQ,115 by NXP Semiconductors is a Network Interface with 4 functions. It operates in automotive grade at temperatures from -40 to 125°C. This interface circuit has a nominal voltage of 3.3V and comes in a chip carrier package style for various applications.
AR8031-AL1B
Qualcomm
Qualcomm's AR8031-AL1B is an Ethernet transceiver with a data rate of 1000 Mbps. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. With a terminal pitch of 0.4 mm and no lead terminal form, it offers reliable network connectivity in a compact square package.
LTC2875HDD#TRPBF
Analog Devices
LTC2875HDD#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating from -40 to 125 °C. It has a small outline package style and matte tin finish, suitable for automotive telecom applications at 3.3V supply voltage.
MAX33041EASA+T
CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
ISO1042DW
ISO1042DW by Texas Instruments is a network interface with 16 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage of 5V. The package is small outline, surface mountable, and has a terminal pitch of 1.27mm.
MAX3051ESA+TCJN
INTERFACE CIRCUIT;
DP83630SQ/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
TLE9250XLEXUMA1
Infineon Technologies
TLE9250XLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 0.65mm pitch, and 5V supply voltage. Its small outline package makes it suitable for automotive applications requiring a compact design and high reliability in harsh environments. The no-lead terminal form and thin profile enhance space efficiency while ensuring robust performance.
DP83620SQE/NOPB
Texas Instruments DP83620SQE/NOPB is a 48-terminal Ethernet transceiver with data rate of 100000 Mbps. It operates at temperatures from -40 to 85 °C and supports power supplies of 2.5/3.3,3.3 V. Ideal for industrial applications requiring reliable network interfaces in compact square package style.
AR8035-AL1A-R
Qualcomm's AR8035-AL1A-R is an Ethernet transceiver with 1000 Mbps data rate, operating at 0-70°C. It features a square chip carrier package with 48 terminals and a very thin profile. Ideal for network interfaces in commercial applications due to its low supply current and compact size.
TCAN1051HGDR
TCAN1051HGDR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -55 to 125°C, and data rate of 5 Mbps. It is ideal for military-grade applications requiring a small outline package and interface circuit functionality at a supply voltage of 5V.
TCAN337GDCNT
TCAN337GDCNT by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -40 to 125°C, and data rate of 5 Mbps. It is ideal for automotive applications requiring a small outline package with low profile and shrink pitch design. The IC features nickel palladium gold terminal finish and gull wing terminal form for reliable performance in telecom interfaces.
KSZ8081RNDIA-TR
Microchip Technology's KSZ8081RNDIA-TR is a Network Interface IC with 24 terminals, operating at -40 to 85°C. It features Ethernet transceiver for 100 Mbps data rate, suitable for industrial applications. The chip carrier package has a low profile of 0.9mm and matte tin finish, making it ideal for surface mount assembly.
88E3018-A2-NNC1I000
Marvell Technology
Marvell Technology's 88E3018-A2-NNC1I000 is a CMOS Ethernet transceiver with 64 terminals in a square chip carrier package. It operates in industrial temperature range (-40 to 85°C) with matte tin finish and no lead terminal form. Nominal voltage is 2.5V, making it suitable for network interfaces requiring high reliability and compact design.
ADIN1300BCPZ
ADIN1300BCPZ by Analog Devices is an Ethernet transceiver IC with 40 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include 1.8V supply voltage, 0.5mm terminal pitch, and matte tin finish for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC2875IS8#PBF
LTC2875IS8#PBF by Analog Devices is a BICMOS technology interface circuit with 3.3V supply voltage, operating from -40 to 85°C. It comes in a small outline package with dual terminals and matte tin finish, suitable for network interfaces in industrial telecom applications.
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC2875IS8#TRPBF
LTC2875IS8#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and nominal voltage of 3.3V. Ideal for network interfaces in industrial telecom applications.
LTC2875HS8#PBF
LTC2875HS8#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating b/w -40 to 125°C. It has a nominal voltage of 3.3V and matte tin terminal finish suitable for automotive applications. This small outline package with gull wing terminals is designed for network interfaces in telecom systems.
LTC2875HS8#TRPBF
LTC2875HS8#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating temperature range of -40 to 125°C. It features matte tin terminal finish, small outline package style, and is suitable for automotive applications requiring a nominal voltage of 3.3V.
LTC2875HDD#PBF
LTC2875HDD#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, matte tin finish, and operates b/w -40 to 125 °C. It's a small outline package suitable for automotive applications, with a nominal voltage of 3.3 V. Ideal for network interfaces in compact designs requiring high-temperature tolerance.
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
LTC2875IDD#PBF
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
LTC2875MPS8#PBF
LTC2875MPS8#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating b/w -55 to 125°C. It has a nominal voltage of 3.3V and matte tin terminal finish. Ideal for network interfaces in military-grade applications due to its small outline package and dual terminal position.
INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC2875IDD#TRPBF
LTC2875IDD#TRPBF by Analog Devices is a network interface IC with 8 terminals and a small outline package. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3.3V. This IC is commonly used for telecom interface circuits.
LTC2875MPDD#PBF
LTC2875MPDD#PBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating from -55 to 125°C. It features matte tin finish, small outline package style, and is suitable for telecom applications requiring a 3.3V supply voltage in military-grade temperature environments.
INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved