Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12; Lens Type: WATER CLEAR; Packing Method: BULK;
Median Price
$0.110
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Newark
1+ parts
$0.384
100+ parts
$0.206
1k+ parts
$0.118
10k+ parts
$0.085
TTI Europe
-
$0.081
Farnell
$0.050
Element14
$0.350
$0.270
Verical
$0.113
Arrow
$0.108
Chip1Stop
$0.053
RS (Exports)
$0.130
$0.069
NAC Semi
IBS Electronics
$2.210
TME
$0.073
$0.058
Vyrian
EZ Electronic Parts
Micros
$0.055
Partservice
$0.109
$0.048
Micros sp.j. W. Kędra i J. Lic
$0.117
$0.052
ComSIT Distribution GmbH
Pegasus Components GmbH
Component Sense
Chip Stock
Odintec Ltd.
Goldney Electronics S.L.
Nova Conductors
J2 Sourcing AB
Speed Components Ltd
Semicontronic
$0.045
$0.044
Aztec Data Supply Inc.
$0.100
Corohmni
$0.523
Eastek
$0.060
Abacus Technologies
Cyclops Electronics Ltd (Excess)
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Advanced Electronics
Speed Components Ltd (Excess)
Visible LEDs KPT-2012SGC attributes and parameters. Explore more Visible LEDs devices from Kingbright
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
KPT-2012SGC Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
World Products
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Siemens
EU2B-YS3303C
Idec
ROTARY SWITCH;
LGQ396-PS-35
Osram Opto Semiconductors
Osram Opto Semiconductors LGQ396-PS-35 is a 1mm single color LED with max. forward current of 0.03A and green color at wavelength. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -30 to 85 °C, making it suitable for various lighting solutions.
HLMP1301
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel; Height: 4 mm;
597-5112-407F
Dialight
Dialight's 597-5112-407F is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and forward voltage of 2.3V. Ideal for surface mount applications, offering diffused white lens and nominal luminous intensity of 11.7mcd in red color.
ASMB-MTB0-0B3A2
Broadcom
ASMB-MTB0-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. It has a peak wavelength of 634/522/465nm, max forward current of 0.025A, and viewing angle of 115°. Ideal for surface mount applications requiring vibrant RGB illumination in compact spaces.
150060GS75000
Wuerth Elektronik & Kg
150060GS75000 by Wurth Elektronik is a single color LED with peak wavelength of 515nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A making it ideal for surface mount applications in electronics requiring green light emission.
XHP50B-00-0000-0D0UH20E3
Wolfspeed
SINGLE COLOR LED;
CLX6F-FKC-CNP1ST1E1BB7D3D3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 877.5/1405.0/267.5; Packing Method: TR, 13 INCH; Maximum Reverse Voltage: 5 V;
597-6501-607F
Dialight's 597-6501-607F LED has a peak wavelength of 574nm, max forward current of 0.03A, and water-clear lens. Ideal for applications requiring single-color green-yellow light with a viewing angle of 70°. Operating temp range -55 to 85°C makes it suitable for various lighting projects.
HSMS-C150
HSMS-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, with a viewing angle of 170° and surface mounting feature.
HLMP-1503
Fairchild Semiconductor's HLMP-1503 is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
HLMP-4740
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; JESD-609 Code: e0;
CMD15-21UGC/TR8
Visual Communications Company
CMD15-21UGC/TR8 by Visual Communications Company is a 2mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this single color LED operates b/w -40 to 85 °C temperatures.
158302260
Wurth Elektronik 158302260 is a single color LED with max forward current of 0.085A and viewing angle of 120°. Ideal for surface mount applications, it operates b/w -40 to 85 °C, making it suitable for cool white lighting in various electronic devices.
LST676-R1S1-1-Z
Osram Opto Semiconductors' LST676-R1S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 168.0mcd, making it suitable for various lighting solutions.
CMD17-21VGD/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: DIFFUSED; Viewing Angle: 140 deg;
LTST-C190TBKT-5A
Lite-on Technology
LTST-C190TBKT-5A by Lite-on Technology is a 1.1mm BLUE LED with 0.02A current, peak wavelength of 468nm, and 130° viewing angle. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C temperatures and has a luminous intensity of 28.1mcd.
XHP35B-00-0000-0D0BD40E5
HLMP3507
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
VLMW11R2S2-5K8L-08
Vishay Intertechnology
Vishay Intertechnology's VLMW11R2S2-5K8L-08 is a 1.6mm single color LED with max forward current of 0.02A and max forward voltage of 4V. Ideal for surface mount applications, it offers a viewing angle of 160° and nominal luminous intensity of 210mcd, making it suitable for various lighting solutions.
HLMP-1790
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KPT-2012SURCK
Kingbright Electronic
KPT-2012SURCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 650nm, ideal for applications requiring HYPER RED light. With max forward current of 0.03A and viewing angle of 140°, it's suitable for surface mount installations in various electronic devices.
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
KPT-2012CGCK
KPT-2012CGCK by Kingbright Electronic is a 1.3mm green LED with a peak wavelength of 574nm and a min luminous intensity of 120cd. It is suitable for surface mount applications and has a max forward current of 0.03A.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Packing Method: TR;
KPT-2012SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Forward Voltage: 2.5 V;
KPT-2012EC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
KPT-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with WATER CLEAR lens. It has a peak wavelength of 627nm, max forward current of 0.03A, and high efficiency red color at 120cd luminous intensity. Ideal for applications requiring surface mount LEDs with a viewing angle of 120° and operating temperatures from -40 to 85 °C.
KPT-2012QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Packing Method: BULK;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
KPT-2012YC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: WATER CLEAR; Packing Method: TR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: WATER CLEAR; Terminal Pitch: 2.35 mm;
KPT-2012SRC-PRV
KPT-2012SRC-PRV by Kingbright Electronic is a 1.3mm WATER CLEAR LED with peak wavelength of 660nm, emitting SUPER BRIGHT RED light. With 0.03A forward current and 120° viewing angle, it's ideal for surface mount applications requiring high luminous intensity up to 100mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPT-2012SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; No. of Functions: 1;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Color: SUPER BRIGHT YELLOW;
KPT-2012PYW
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8; Lens Type: WHITE DIFFUSED; Color: YELLOW;
KPT-2012ZGC-G
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 700.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
KPT-2012QGW
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: DIFFUSED WHITE; Peak Wavelength (nm): 560;
KPT-2012QBC-G
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Packing Method: TR, 7 INCH;
KPT-2012SECK-J3
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved