Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
Median Price
$0.084
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Distrelec
1+ parts
100+ parts
$0.081
1k+ parts
$0.076
10k+ parts
$0.070
TTI Europe
-
$0.068
Newark
Arrow
$0.143
Farnell
$0.051
Verical
$0.115
Element14
$0.359
$0.279
Chip1Stop
$0.047
RS (Exports)
$0.099
$0.079
NAC Semi
$0.082
IBS Electronics
$0.054
Vyrian
Rebound Electronics
TME
$0.110
$0.092
$0.052
Micros
$0.058
LIBRA Elektronik GmbH
Partservice
$0.120
$0.053
Micros sp.j. W. Kędra i J. Lic
$0.118
ComSIT Distribution GmbH
Martec Srl
Nova Conductors
Cyclops Electronics Ltd
Semicontronic
$0.040
$0.039
Advanced Electronics
$0.094
$0.089
Aztec Data Supply Inc.
$0.260
Corohmni
$0.513
Abacus Technologies
Eastek
$0.060
Continental Prestige Electronics
$0.066
$0.049
Benley Electronics
Argo Parts USA
EMSNET (Excess)
Bastille Electronics
Cyclops Electronics Ltd (Excess)
Visible LEDs KPT-2012SURCK attributes and parameters. Explore more Visible LEDs devices from Kingbright
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
KPT-2012SURCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
American Power Devices
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
HLMP-4740
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; JESD-609 Code: e0;
SLR-56YY3F
ROHM
ROHM's SLR-56YY3F is a 5mm SINGLE COLOR LED with peak wavelength of 585nm. With max forward current of 0.02A, it offers yellow light at 10.0mcd luminous intensity. Ideal for applications requiring diffused yellow light emission in a compact form factor.
150080BS75000
Wuerth Elektronik & Kg
150080BS75000 by Wurth Elektronik is a WATER CLEAR BLUE LED with a peak wavelength of 465nm and viewing angle of 140°. It has a size of 1.4mm, operates at temperatures from -40 to 85 °C, and has a max forward current of 0.03A. Ideal for surface mount applications requiring single color illumination.
HLMP-3507-D0001
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTW-170TK
Lite-on Technology
LTW-170TK by Lite-on Technology is a 1.4mm SINGLE COLOR LED with 130° viewing angle and 281.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with 0.02A forward current for white light output.
CMD15-21UBC/TR8
Visual Communications Company
CMD15-21UBC/TR8 by Visual Communications Company is a 2mm BLUE LED with peak wavelength of 430nm. It has a clear lens, operates b/w -40°C to 85°C, and offers a luminous intensity of 45.0mcd. Ideal for surface mount applications in visible LED displays and indicators.
HLMP-3401
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
15335340AA350
15335340AA350 by Wurth Elektronik is a 2.6mm UV LED with 0.8A forward current and 405nm peak wavelength. Ideal for applications requiring water clear lens, surface mounting feature, and built-in ESD protection device. Operating temperature ranges from -40 to 85°C.
HLMP1790
Cml Technologies & Kg
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
SML-LX1610RGBW/A
Lumex
The Lumex SML-LX1610RGBW/A is a COMMON ANODE, 3 ELEMENTS LED with 0.3A max current and 625/525/470nm peak wavelengths. Ideal for TRIPLE COLOR illumination in applications like signage, displays, and indicators. Features WATER CLEAR lens, 110° viewing angle, and SURFACE mounting.
VLMU3100-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMU3100-GS08 is a single color LED with max forward current of 0.03A and max forward voltage of 3.8V. With a viewing angle of 120°, it operates b/w -40 to 80 °C, making it ideal for various visible LED applications.
HLMP-6300-F0011
Broadcom
HLMP-6300-F0011 by Broadcom is a single color LED with a peak wavelength of 635nm and a max forward current of 0.03A. It is commonly used in applications such as indicator lights, displays, and signage due to its high efficiency red color and axial mount configuration.
SML-522MU8WT86
ROHM's SML-522MU8WT86 is a 1.3mm dual-color LED with separate elements, featuring max forward current of 0.02A and nominal luminous intensity of 63.0/40.0 mcd. Ideal for surface mount applications in visible LED category, it emits red/yellow-green light with milky white lens, suitable for temperatures ranging from -40 to 85°C.
APT1608SRCPRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
XHP50B-00-0000-0D0BJ40E5
Wolfspeed
SINGLE COLOR LED;
KA-4040SRCGKS-R
Kingbright Electronic
KA-4040SRCGKS-R by Kingbright Electronic is a 2.4mm dual-color LED with peak wavelengths of 655nm/574nm and a max forward current of 0.03A. Ideal for applications requiring super bright red/green illumination, this surface-mount LED has a viewing angle of 120° and nominal luminous intensity of 200.0/90.0 mcd, making it suitable for various optoelectronic projects.
150141RB73100
DUAL COLOR LED;
LWY1SG-BFOO-GKJM-1
Osram Opto Semiconductors
SINGLE COLOR LED; Terminal Finish: SILVER; JESD-609 Code: e4;
HLMP3401
Three-five Systems
HLMP3401 by Three-five Systems is a visible LED with peak wavelength of 583nm, forward voltage of 3V, and max current of 0.02A. It's used in applications requiring yellow light emission, with diffused lens type and wide 75° viewing angle.
QTLP650C-2.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Configuration: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KPT-2012SURCK
KPT-2012SURCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 650nm, ideal for applications requiring HYPER RED light. With max forward current of 0.03A and viewing angle of 140°, it's suitable for surface mount installations in various electronic devices.
KPT-2012CGCK
KPT-2012CGCK by Kingbright Electronic is a 1.3mm green LED with a peak wavelength of 574nm and a min luminous intensity of 120cd. It is suitable for surface mount applications and has a max forward current of 0.03A.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Packing Method: TR;
KPT-2012SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12; Lens Type: WATER CLEAR; Packing Method: BULK;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Forward Voltage: 2.5 V;
KPT-2012EC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
KPT-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with WATER CLEAR lens. It has a peak wavelength of 627nm, max forward current of 0.03A, and high efficiency red color at 120cd luminous intensity. Ideal for applications requiring surface mount LEDs with a viewing angle of 120° and operating temperatures from -40 to 85 °C.
KPT-2012QBC-D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Packing Method: BULK;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
KPT-2012YC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: WATER CLEAR; Packing Method: TR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.0; Lens Type: WATER CLEAR; Terminal Pitch: 2.35 mm;
KPT-2012SRC-PRV
KPT-2012SRC-PRV by Kingbright Electronic is a 1.3mm WATER CLEAR LED with peak wavelength of 660nm, emitting SUPER BRIGHT RED light. With 0.03A forward current and 120° viewing angle, it's ideal for surface mount applications requiring high luminous intensity up to 100mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPT-2012SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; No. of Functions: 1;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Color: SUPER BRIGHT YELLOW;
KPT-2012SGD
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12; Lens Type: DIFFUSED GREEN; Size: 1.3 mm;
KPT-2012SEC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPT-2012SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; No. of Functions: 1;
KPT-2012SECK-J3
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved