Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Lumex SML-LX0603USBW-TR is a 1mm single color LED with peak wavelength of 470nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this ultra super blue LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
Median Price
$2.020
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$0.335
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.080
Mouser Electronics
$0.895
$0.778
Newark
$1.090
$0.899
$0.857
DigiKey
$2.030
$1.110
$0.907
$0.865
Farnell
$2.086
$1.143
$1.042
Element14
$2.840
$1.550
$1.330
Verical
Greenchips
$0.743
$0.708
$0.674
$0.609
Vyrian
Prism Electronics
Nova Conductors
Aztec Data Supply Inc.
$0.120
Advanced Electronics
$0.229
$0.217
Corohmni
$0.577
Continental Prestige Electronics
$1.730
$0.911
$0.733
Perfect Parts
Argo Parts USA
Emar International I/E
Bastille Electronics
This LED has a simple configuration, making it easy to integrate into various electronic designs.
The small size of this LED allows for compact and space-saving installations.
With a high maximum forward current, this LED provides bright and consistent illumination.
The peak wavelength of 470 nm produces a vibrant blue light.
The milky white lens helps diffuse the light evenly for a softer glow.
This LED is designed specifically for emitting a single color, ensuring accurate and consistent lighting.
With only 2 terminals, this LED is easy to connect and solder.
This LED can operate in high-temperature environments without any issues.
The low height of this LED makes it suitable for slim devices and applications with limited space.
The rectangular shape provides a wide beam angle for better light distribution.
This LED can also function in cold environments without any performance degradation.
The tin terminal finish ensures a reliable and durable connection.
Produces a vibrant blue light that is ideal for decorative or indicator lighting.
The ultra super blue color adds a unique and eye-catching element to any lighting design.
This LED is packed in Tape and Reel format for convenient handling and storage.
With a high maximum reverse voltage, this LED is well-protected against reverse current.
The terminal pitch of 1.5 mm allows for easy installation on standard PCBs.
This LED offers a wide viewing angle for better visibility from different angles.
The high luminous intensity of 20.0 mcd ensures a bright and illuminating output.
This LED is designed for surface mounting, making it versatile for various applications.
The low maximum forward voltage ensures energy-efficient operation without excessive power consumption.
Visible LEDs SML-LX0603USBW-TR attributes and parameters. Explore more Visible LEDs devices from Lumex
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
SML-LX0603USBW-TR Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Central Semiconductor
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Wuxi Xuyang Electronic
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Bytesonic Electronics
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Multicomp Pro
550-2405F
Dialight
The Dialight 550-2405F is a 5mm red LED with peak wavelength of 650nm. It has a max forward current of 0.02A and forward voltage of 3V, suitable for single color indicator lights in various applications. With diffused lens and nominal luminous intensity of 2.2mcd, it offers a wide viewing angle of 50° for clear visibility.
LGR971
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
HLMP-1503-D0002
Broadcom
Broadcom's HLMP-1503-D0002 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits high performance green light at 6.15mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 60°, such as indicator lights in electronic devices.
SML-LX0404SIUPGUSB
Lumex
The Lumex SML-LX0404SIUPGUSB is a 1mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632/518/465nm. It has a max forward current of 0.03A and viewing angle of 120°, making it ideal for applications requiring RGB illumination in compact spaces. With a water clear lens and surface mounting feature, this LED operates b/w -40 to 85°C temperatures.
CMD15-21UGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: CLEAR; Maximum Operating Temperature: 85 Cel;
12-23C/R6GHBHC-A01/2C
Everlight Electronics
Everlight Electronics' 12-23C/R6GHBHC-A01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632nm, 518nm, and 468nm. It has a max forward current of 0.025A and water-clear lens type. Ideal for applications requiring brilliant red, green, and blue colors with surface mounting feature.
553-0111F
Dialight's 553-0111F is a 3mm red LED array with separate, 2-element configuration. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring high luminous intensity in a compact size.
597-7701-207F
Dialight's 597-7701-207F is a dual color LED with peak wavelengths of 635nm and 572nm. It has a max forward current of 0.03A, water clear lens, and operates b/w -40°C to 100°C. Ideal for applications requiring super red and green colors, with a viewing angle of 120° and surface mounting feature.
SLR-342VR3F
ROHM
ROHM's SLR-342VR3F is a 3.1mm single color LED with peak wavelength of 650nm, diffused lens, and red color. It has 2 terminals with tin/silver/copper finish, T-1 code, and radial mount feature. Ideal for applications requiring visible LEDs in compact size like indicator lights or displays.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
553-0311F
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
LTL-4233
LTL-4233 by Lite-on Technology is a 5mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for applications requiring diffused lighting, such as indicator lights in electronic devices. With a viewing angle of 36°, it offers a nominal luminous intensity of 19mcd for clear visibility.
CLV1A-FKB-CK1VW1DE1BB7C3C3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 635.0/1430.0/285.0; Configuration: COMMON ANODE, 3 ELEMENTS; Maximum Operating Temperature: 85 Cel;
LTST-C230KGKT
LTST-C230KGKT by Lite-on Technology is a 1.6mm SINGLE COLOR LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
L-934GD
Kingbright
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Configuration: SINGLE;
LHR974
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
KP-1608SGC
Kingbright Electronic
KP-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
597-5412-407F
Dialight's 597-5412-407F is a single color LED with a peak wavelength of 570nm and a max forward current of 0.025A. It is commonly used in surface mount applications for its diffused white lens and yellow-green color, offering a viewing angle of 152°.
LXR7-SW65
Lumileds Holding B V
SINGLE COLOR LED;
150120RS75000
Wuerth Elektronik & Kg
150120RS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring red light emission in compact spaces, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-LX2832SIC-TR
SML-LX2832SIC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 636nm and max forward current of 0.03A. Ideal for applications requiring a WATER CLEAR lens, it has a viewing angle of 120° and nominal luminous intensity of 250.0mcd. Suitable for surface mounting, it operates b/w -30 to 85 °C, making it perfect for red/orange-red color displays.
SML-LXL1209SIC-TR
The Lumex SML-LXL1209SIC-TR is a 1.8mm WATER CLEAR LED with peak wavelength of 636nm and luminous intensity of 600.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85°C, drawing 0.03A current.
SML-LXL1206GC-TR
SML-LXL1206GC-TR by Lumex is a 1.1mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and luminous intensity of 20.0mcd. Ideal for surface mount applications in electronics due to its water clear lens and single color configuration.
SML-LX0805SRC-TR
SML-LX0805SRC-TR by Lumex is a 1.4mm SINGLE COLOR LED with peak wavelength of 660nm, forward current of 0.025A, and luminous intensity of 25.0mcd. Ideal for surface mount applications in products requiring super red light emission at a wide viewing angle of 140°.
SML-LX0603GW-TR
SML-LX0603GW-TR by Lumex is a 1mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for surface mount applications, this green LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
SML-LXR44SRC-TR
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
SML-LX1610RGBW/A
The Lumex SML-LX1610RGBW/A is a COMMON ANODE, 3 ELEMENTS LED with 0.3A max current and 625/525/470nm peak wavelengths. Ideal for TRIPLE COLOR illumination in applications like signage, displays, and indicators. Features WATER CLEAR lens, 110° viewing angle, and SURFACE mounting.
SML-LXR44SUGC-TR
SML-LXR44SUGC-TR by Lumex is a 2.4mm round, single color LED with a peak wavelength of 574nm and a max forward current of 0.025A. It has a clear lens and a viewing angle of 90°. This surface mount LED is commonly used in applications that require super ultra green illumination.
SML-LX0603SRW-TR
SML-LX0603SRW-TR by Lumex is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications, it emits red light with luminous intensity of 15.0mcd.
SML-LX15IGC-RP-TR
SML-LX15IGC-RP-TR by Lumex is a 3mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm, suitable for surface mount applications in visible LED displays.
SML-LXR44GC-TR
SML-LXR44GC-TR by Lumex is a 2.4mm GREEN LED with max forward current of 0.025A, peak wavelength of 565nm, and viewing angle of 120°. Ideal for surface mount applications in electronics due to its water clear lens and nominal luminous intensity of 30mcd at a max forward voltage of 2.5V.
SML-LXT0805GW-TR
SML-LXT0805GW-TR by Lumex is a single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting due to its diffused milky white lens and green color at wavelength.
SML-LXL1209UPGC-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: CLEAR; Configuration: SINGLE;
SML-LXR851SOC-TR
SML-LXR851SOC-TR by Lumex is a 2mm single color LED with peak wavelength of 610nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this LED is commonly used in visible light displays and indicator lights due to its super orange color and clear lens type.
SML-LX23SUGC-TR
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
SML-LX0402SUGC-TR
The Lumex SML-LX0402SUGC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 120°. Ideal for surface mount applications, it emits green light and operates b/w -40 to 85 °C.
SML-LX15IC-RP-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
SML-LXT0805IW-TR
The Lumex SML-LXT0805IW-TR is a 1.4mm SINGLE COLOR LED with peak wavelength of 635nm, emitting RED light at 11.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -25°C to 80°C temperature range.
SML-LX0402SIC-TR
The Lumex SML-LX0402SIC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 636nm, forward current of 0.03A, and luminous intensity of 140.0mcd. Ideal for surface mount applications requiring an orange-red light source with a viewing angle of 120°.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved