Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Lumex SML-LX1610UWC/A is an 8mm single color LED with clear lens, max forward current of 0.35A, and viewing angle of 110°. Ideal for surface mount applications in temperature range -20 to 70 °C, offering white light with luminous intensity of 3.5 mcd.
Median Price
$5.187
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
$4.570
10k+ parts
Nova Conductors
$3.771
Vyrian
Aztec Data Supply Inc.
$0.170
Corohmni
$0.665
AZTECH Wire
$1.990
$1.910
$1.870
$1.840
Continental Prestige Electronics
$3.743
$3.668
Argo Parts USA
Bastille Electronics
$3.582
$3.403
$3.356
Advanced Electronics
$3.818
Perfect Parts
Single configuration makes it easy to control and use in various applications.
Compact size allows for easy installation and placement in different devices.
High maximum forward current allows for bright illumination.
Clear lens ensures efficient light output and visibility.
Single color LED simplifies use and reduces complexity in lighting applications.
Having 2 terminals simplifies the wiring process and ensures easy connectivity.
T-code classification ensures compatibility and standardized size.
High maximum operating temperature allows for reliable performance in various environments.
Low height profile enables sleek designs and space-saving installations.
Round shape offers uniform light distribution and versatile mounting options.
Wide operating temperature range ensures functionality in cold environments.
Tin terminal finish provides good conductivity and durability.
White color LED offers clean and bright lighting for various applications.
Bulk packing is cost-effective and suitable for mass production.
Optimal terminal pitch facilitates easy soldering and connection.
Wide viewing angle ensures broad light coverage and visibility.
Moderate luminous intensity provides balanced brightness for various lighting applications.
Surface mount capability allows for easy and secure installation on circuit boards.
Visible LEDs SML-LX1610UWC/A attributes and parameters. Explore more Visible LEDs devices from Lumex
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
SML-LX1610UWC/A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
1554216002
Molex
WIRE AND CABLE;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Eic Semiconductor
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Micro Commercial Components
SML-P11UTT86RH
ROHM
ROHM SML-P11UTT86RH is a 0.6mm SINGLE COLOR LED with 1.8V max forward voltage, ideal for applications requiring red light emission. With a max forward current of 0.02A and operating temperature range from -40 to 85°C, it offers high luminous intensity at 2.05mcd in a compact square shape for surface mount assembly.
HLMP4700
Morrihan International
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; JESD-609 Code: e0; Viewing Angle: 50 deg;
KP-2012SGC
Kingbright Electronic
KP-2012SGC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and 120° viewing angle.
HLMP-1503
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: TINTED DIFFUSED; Maximum Reverse Voltage: 5 V;
HSMG-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-LX1206SYC-TR
Lumex
SML-LX1206SYC-TR by Lumex is a 2mm single color LED with peak wavelength of 590nm, forward current of 0.03A, and luminous intensity of 70.0mcd. Ideal for surface mount applications requiring super yellow light output in a compact form factor.
SML-D12U8WT86C
ROHM's SML-D12U8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it has a red color, luminous intensity of 63.0mcd, and operates b/w -40 to 85°C temperature range.
HSMZ-C190
Broadcom
HSMZ-C190 by Broadcom is a 1mm red LED with peak wavelength of 643nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications in electronics, displays, and indicator lights due to its compact size and high luminous intensity.
XHP35B-00-0000-0D0BE240E
Wolfspeed
SINGLE COLOR LED;
553-0212F
Dialight
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
OVLLB8C7
Tt Electronics Plc
OVLLB8C7 by Tt Electronics Plc is a 5mm SINGLE COLOR LED with peak wavelength of 466nm. It has a max forward current of 0.02A and viewing angle of 85°. Ideal for applications requiring BLUE light emission, such as indicator lights in electronic devices.
LTW-170TK
Lite-on Technology
LTW-170TK by Lite-on Technology is a 1.4mm SINGLE COLOR LED with 130° viewing angle and 281.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with 0.02A forward current for white light output.
XHP35B-00-0000-0D0UB227G
HLMP1790
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP-4740
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
SMLP36RGB2W3RD
ROHM SMLP36RGB2W3RD is a 1.5mm TRIPLE COLOR LED with SEPARATE configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring RGB illumination in compact spaces like consumer electronics and automotive lighting.
SML-D12P8WT86C
ROHM's SML-D12P8WT86C is a 1.2mm GREEN LED with max forward current of 0.02A and forward voltage of 2.2V. Ideal for surface mount applications, it has a min operating temp of -40°C and max operating temp of 85°C, making it suitable for various lighting solutions.
SML-LX0603IW-TR
The Lumex SML-LX0603IW-TR is a 1mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this diffused milky white LED is commonly used in visible light displays and indicators due to its red color and nominal luminous intensity of 14.0mcd.
HLMP-1503-D0000
HLMP-1503-D0000 by Broadcom is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and nominal luminous intensity of 6.15mcd. Ideal for applications requiring high performance green light emission, such as indicator lights in electronic devices.
TLUV5300
The Vishay Intertechnology TLUV5300 is a 5mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 630nm/565nm, suitable for applications requiring red/green light emission. With a viewing angle of 60° and nominal luminous intensity of 2.5mcd, it is ideal for bulk mounting in optoelectronic designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-LX2832SIC-TR
SML-LX2832SIC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 636nm and max forward current of 0.03A. Ideal for applications requiring a WATER CLEAR lens, it has a viewing angle of 120° and nominal luminous intensity of 250.0mcd. Suitable for surface mounting, it operates b/w -30 to 85 °C, making it perfect for red/orange-red color displays.
SML-LXL1209SIC-TR
The Lumex SML-LXL1209SIC-TR is a 1.8mm WATER CLEAR LED with peak wavelength of 636nm and luminous intensity of 600.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85°C, drawing 0.03A current.
SML-LXL1206GC-TR
SML-LXL1206GC-TR by Lumex is a 1.1mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and luminous intensity of 20.0mcd. Ideal for surface mount applications in electronics due to its water clear lens and single color configuration.
SML-LX0805SRC-TR
SML-LX0805SRC-TR by Lumex is a 1.4mm SINGLE COLOR LED with peak wavelength of 660nm, forward current of 0.025A, and luminous intensity of 25.0mcd. Ideal for surface mount applications in products requiring super red light emission at a wide viewing angle of 140°.
SML-LX0603GW-TR
SML-LX0603GW-TR by Lumex is a 1mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for surface mount applications, this green LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
SML-LXR44SRC-TR
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
SML-LX1610RGBW/A
The Lumex SML-LX1610RGBW/A is a COMMON ANODE, 3 ELEMENTS LED with 0.3A max current and 625/525/470nm peak wavelengths. Ideal for TRIPLE COLOR illumination in applications like signage, displays, and indicators. Features WATER CLEAR lens, 110° viewing angle, and SURFACE mounting.
SML-LXR44SUGC-TR
SML-LXR44SUGC-TR by Lumex is a 2.4mm round, single color LED with a peak wavelength of 574nm and a max forward current of 0.025A. It has a clear lens and a viewing angle of 90°. This surface mount LED is commonly used in applications that require super ultra green illumination.
SML-LX0404SIUPGUSB
The Lumex SML-LX0404SIUPGUSB is a 1mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632/518/465nm. It has a max forward current of 0.03A and viewing angle of 120°, making it ideal for applications requiring RGB illumination in compact spaces. With a water clear lens and surface mounting feature, this LED operates b/w -40 to 85°C temperatures.
SML-LX0603SRW-TR
SML-LX0603SRW-TR by Lumex is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications, it emits red light with luminous intensity of 15.0mcd.
SML-LX15IGC-RP-TR
SML-LX15IGC-RP-TR by Lumex is a 3mm dual-color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm, suitable for surface mount applications in visible LED displays.
SML-LXR44GC-TR
SML-LXR44GC-TR by Lumex is a 2.4mm GREEN LED with max forward current of 0.025A, peak wavelength of 565nm, and viewing angle of 120°. Ideal for surface mount applications in electronics due to its water clear lens and nominal luminous intensity of 30mcd at a max forward voltage of 2.5V.
SML-LXT0805GW-TR
SML-LXT0805GW-TR by Lumex is a single color LED with a peak wavelength of 565nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting due to its diffused milky white lens and green color at wavelength.
SML-LXL1209UPGC-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: CLEAR; Configuration: SINGLE;
SML-LXR851SOC-TR
SML-LXR851SOC-TR by Lumex is a 2mm single color LED with peak wavelength of 610nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this LED is commonly used in visible light displays and indicator lights due to its super orange color and clear lens type.
SML-LX23SUGC-TR
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
SML-LX0402SUGC-TR
The Lumex SML-LX0402SUGC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 120°. Ideal for surface mount applications, it emits green light and operates b/w -40 to 85 °C.
SML-LX15IC-RP-TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
SML-LXT0805IW-TR
The Lumex SML-LXT0805IW-TR is a 1.4mm SINGLE COLOR LED with peak wavelength of 635nm, emitting RED light at 11.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -25°C to 80°C temperature range.
SML-LX0402SIC-TR
The Lumex SML-LX0402SIC-TR is a 0.8mm SINGLE COLOR LED with peak wavelength of 636nm, forward current of 0.03A, and luminous intensity of 140.0mcd. Ideal for surface mount applications requiring an orange-red light source with a viewing angle of 120°.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved