Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WJLXT972ALC.A4 by Intel is an Ethernet transceiver with a data rate of 100 Mbps. It operates at temperatures b/w 0-70°C and requires a supply voltage of 3.3V. With a low profile flatpack design, it's ideal for networking applications in commercial-grade environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
LWI Electronics Inc
Digiode
ComSIT Distribution GmbH
EZ Electronic Parts
Dan-Mar Components
Nova Conductors
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
Zilex Electronics Inc.
Connect4Technologies Inc.
Cyclops Electronics Ltd
Inventory MP
MARBEL Systems
$9.616
Texas Native Microelectronics
$11.053
$10.611
$10.279
$9.727
Corohmni
$12.029
Kenton Components
$13.264
$11.672
AZTECH Wire
$14.063
Aztec Data Supply Inc.
$16.950
Qasali Group International
$29.843
$27.754
$26.262
Semicontronic
$555.000
$541.125
$538.350
Continental Prestige Electronics
A-Z Elektronik GmbH
Perfect Parts
Authorized Procurement Solutions
Kepictronics
S.R.D Solutions
Argo Parts USA
GreenTree Electronics
Bastille Electronics
Infinite Electronics LLP (Excess)
Futuretech Components
ChipstoGo Electronic ltd
Corphita
Electronic Sources GmbH
Cyclops Electronics Ltd (Excess)
The use of plastic/epoxy material ensures durability and light weight, making the product easy to handle and suitable for various environments.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and enhancing overall design aesthetics.
The availability of multiple power supply options provides flexibility and compatibility with different types of systems and configurations.
Having a higher number of terminals allows for more connections and functionality, making the product versatile and suitable for complex networking applications.
The high maximum operating temperature ensures reliable performance even in challenging conditions, making the product suitable for industrial and commercial use.
The low minimum operating temperature ensures that the product can function effectively in a wide range of environments, providing flexibility and reliability.
Being an Ethernet transceiver, the product enables high-speed data transmission at 100 Mbps, making it ideal for networking applications that require fast and reliable connectivity.
Network Interfaces WJLXT972ALC.A4 attributes and parameters. Explore more Network Interfaces devices from Intel
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
WJLXT972ALC.A4 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Intel Corporation (commonly known as Intel) is an American multinational corporation and technology company headquartered in Santa Clara, California. It is one of the world's largest semiconductor chip manufacturer by revenue, and is one of the developers of the x86 series of instruction sets found in most personal computers (PCs). Incorporated in Delaware, Intel ranked No. 45 in the 2020 Fortune 500 list of the largest United States corporations by total revenue for nearly a decade, from 2007 to 2016 fiscal years. Intel supplies microprocessors for computer system manufacturers such as Acer, Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing. Intel (integrated and electronics) was founded on July 18, 1968, by semiconductor pioneers Gordon Moore (of Moore's law) and Robert Noyce (1927–1990), and is associated with the executive leadership and vision of Andrew Grove. Intel was a key component of the rise of Silicon Valley as a high-tech center. Noyce was a key inventor of the integrated circuit (microchip). Intel was an early developer of SRAM and DRAM memory chips, which represented the majority of its business until 1981. Although Intel created the world's first commercial microprocessor chip in 1971, it was not until the success of the personal computer (PC) that this became its primary business.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
1N4148WS
Promax-johnton
FDLL4148
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AR8035-AL1A
Qualcomm
Qualcomm's AR8035-AL1A is an Ethernet transceiver with 1000 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, 48 terminals, and requires 3.3V supply voltage. Ideal for network interfaces in commercial applications due to its compact size and low supply current of 113.7 mA.
TJA1052IT/2Y
NXP Semiconductors
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260;
SN65HVD233DG4
SN65HVD233DG4 by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating b/w -40 to 125°C, it has a supply voltage of 3.3V and consumes up to 6mA. Ideal for automotive applications due to its small outline package and robust temperature grade.
AR8033-AL1A
Qualcomm's AR8033-AL1A is an Ethernet transceiver with 1000 Mbps data rate, operating at 0-70°C. It features a square chip carrier package with 48 terminals and requires 3.3V supply voltage. Ideal for network interfaces in commercial telecom applications due to its compact size and low supply current of 113.7 mA.
TJA1100HNZ
TJA1100HNZ by NXP Semiconductors is an AEC-Q100 compliant Ethernet transceiver with 36 terminals in a chip carrier package. Operating temperature range from -40 to 125°C, suitable for automotive applications. Features include no-lead terminal form, 3.3V supply voltage, and compact dimensions of 6x6mm.
KSZ8091MNXIA-TR
Microchip Technology's KSZ8091MNXIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square surface mount package style, matte tin finish, and 3.3V supply voltage. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
MCP2562FD-E/P
MCP2562FD-E/P by Microchip: CAN FD transceiver with 8 Mbps data rate, 5V supply voltage, and -40 to 125°C operating temp. Ideal for automotive applications requiring TS16949 screening level. Package style is in-line with 8 terminals and matte tin finish.
LTC2875IS8#PBF
Analog Devices
LTC2875IS8#PBF by Analog Devices is a BICMOS technology interface circuit with 3.3V supply voltage, operating from -40 to 85°C. It comes in a small outline package with dual terminals and matte tin finish, suitable for network interfaces in industrial telecom applications.
KSZ8041TL-TR
KSZ8041TL-TR by Microchip Technology is a network interface with 48 terminals and a package shape of flatpack, thin profile, fine pitch. It operates at temperatures b/w 0 to 70 °C and has a data rate of 100 Mbps. This Ethernet transceiver is commonly used in commercial applications requiring high-speed networking capabilities.
KSZ9897STXC-TR
Microchip Technology's KSZ9897STXC-TR is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial telecom applications. Terminal finish is matte tin with gull wing form, ideal for surface mount assembly.
LAN8710A-EZK-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DP83848MPTBEP
DP83848MPTBEP by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -55 to 125 °C, suitable for military-grade applications. The package is a square flatpack with 48 terminals, featuring GULL WING terminal form and 0.5 mm pitch.
KSZ8001LI
Microchip Technology's KSZ8001LI is an Ethernet transceiver with 100 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.8V. The package style is flatpack, low profile, fine pitch making it suitable for network interfaces in various applications.
TCAN1044VDRBRQ1
TCAN1044VDRBRQ1 by Texas Instruments is an automotive-grade network interface IC with 8 Mbps data rate, AEC-Q100 screening, and 5 V supply voltage. It comes in a small outline package suitable for surface mount applications in automotive electronics. Operating temperature ranges from -40 to 125°C making it ideal for harsh environments.
KSZ9031RNXVA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8081MNXCA-TR
KSZ8081MNXCA-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 32 terminals in a square chip carrier package suitable for network interfaces. Ideal for commercial applications requiring a compact design and low power consumption.
TCAN332GDCNT
TCAN332GDCNT by Texas Instruments is an automotive-grade network interface IC with a 3.3V supply voltage and 5 Mbps data rate. It features a small outline, low profile package style with dual terminals and nickel palladium gold finish. Ideal for telecom applications requiring high-temperature operation (-40 to 125°C).
HI-1573PSIF
Holt Integrated Circuits
MIL-STD-1553 DATA BUS TRANSCEIVER;
KSZ8081RNAIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
PCA82C250TD-T
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WJLXT971ALE.A4-857343
Inphi
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
Cortina Systems
Cortina Systems' WJLXT971ALE.A4-857343 is a 64-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. This CMOS technology device has a low profile flatpack package suitable for industrial applications, with temperature range from -40 to 85°C. It features gull wing terminals and quad terminal position for surface mount assembly.
WJLXT971ALE.A4-857346
Cortina Systems' WJLXT971ALE.A4-857346 is a 64-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features GULL WING terminals in a low-profile flatpack package suitable for industrial temperature grades. Ideal for network interfaces, this CMOS technology device offers high performance in compact square packaging.
WJLXT971ALE.A4
Intel
WJLXT971ALE.A4 by Intel is an Ethernet transceiver with 64 terminals in a square flatpack package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3.3V and gull wing terminal form, it's ideal for networking applications.
WJLXT971ALE.A4SE001
WJLXT971ALE.A4SE001 by Intel is an Ethernet transceiver with a data rate of 100 Mbps. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 3.3V, making it suitable for industrial applications requiring high-speed network connectivity. The package style is flatpack, low profile, fine pitch with a terminal pitch of 0.5mm, ideal for compact designs in networking equipment.
WJLXT971ALC.A4-857342
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
WJLXT971ALC.A4-857342 by Cortina Systems is a 64-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a low profile flatpack package style suitable for network interfaces, with Gull Wing terminals and CMOS technology. This commercial-grade device has a temperature range of 0-70°C, making it ideal for various networking applications.
WJLXT972ALC.A4-857341
Cortina Systems' WJLXT972ALC.A4-857341 is a network interface IC with 64 terminals, operating at 100 Mbps data rate. It features a low profile flatpack package, GULL WING terminals, and operates on 2.5/3.3 V supplies. Ideal for Ethernet transceiver applications in commercial temperature environments with a compact square shape of 10x10 mm².
WJLXT905LE.C2
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
WJLXT971ALC.A4
WJLXT972ALC.A4-857345
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved