Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
Median Price
$2.999
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$2.310
100+ parts
$1.700
1k+ parts
$1.280
10k+ parts
-
Mouser Electronics
$5.260
$3.370
$3.120
$2.990
Newark
$5.670
$3.630
$3.380
$3.200
Analog Devices Inc
$5.880
$3.773
$2.150
$3.300
Arrow
$2.845
Verical
Element14
$4.780
$4.400
DigiKey
Rochester
$2.690
$2.410
$2.260
Maritex
$2.090
$1.220
$1.037
Nova Conductors
$2.210
Mobius Materials
$2.655
$2.126
Digiode
$5.282
Cyclops Electronics Ltd
Chip Stock
Bristol Electronics
Vyrian
Anansix
ACDS - Activité Composants Distribution Service
Flex Direct, LLC
Atlantic Semiconductor
Sunrise Surplus Inc.
Prism Electronics
Semicontronic
$1.880
$1.833
$1.824
Argo Parts USA
$2.190
Vigor
$2.880
Continental Prestige Electronics
$3.130
$1.710
Component Stockers USA
$3.670
$3.100
$2.700
Corphita
$5.004
MARBEL Systems
$6.244
Texas Native Microelectronics
$7.177
$6.890
$6.675
$6.316
Kenton Components
$8.612
$7.579
Modulus Dynamics
$8.767
Microchip USA
$12.900
Corohmni
$15.583
Advanced Electronics
$17.120
$16.264
Qasali Group International
$19.378
$18.021
$17.053
Perfect Parts
iodParts Technologies Inc.
$0.848
Kepictronics
Epart123
$2.120
Authorized Procurement Solutions
Lixinc
S.R.D Solutions
GreenTree Electronics
Robosynatics
$16.424
$16.089
Lucentia Tech
Benley Electronics
Netroflash
$2.166
$2.100
$2.055
Speed Components Ltd (Excess)
Futuretech Components
Network Interfaces MAX3051EKA+T attributes and parameters. Explore more Network Interfaces devices from Maxim Integrated
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MAX3051EKA+T Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
HI-1573PSI
Holt Integrated Circuits
MIL-STD-1553 DATA BUS TRANSCEIVER;
MCP2542FD-H/SN
Microchip Technology
MCP2542FD-H/SN by Microchip Tech is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with 140 mA supply current and 5V nominal voltage. The small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.
TJA1044GT/3
NXP Semiconductors
INTERFACE CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SN65HVD233D
Texas Instruments
SN65HVD233D by Texas Instruments is an automotive-grade interface circuit with a data rate of 1 Mbps. It operates at temperatures ranging from -40 to 125°C and has a nominal voltage of 3.3V. This network interface IC comes in a small outline package, making it suitable for various automotive applications.
KSZ8721CL
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
ADIN1300BCPZ-R7
Analog Devices
ADIN1300BCPZ-R7 by Analog Devices is a network interface chip carrier with 40 terminals and a very thin profile. It operates in an industrial temperature range of -40 to 85 °C and has a nominal voltage of 1.8 V. This Ethernet transceiver is suitable for telecom applications.
TCAN337DR
TCAN337DR by Texas Instruments is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It supports a data rate of 1 Mbps at a supply voltage of 3.3V, making it ideal for interface circuit applications in automotive electronics.
TCAN4550RGYQ1
TCAN4550RGYQ1 by Texas Instruments is an AEC-Q100 compliant interface circuit with 20 terminals in a chip carrier package. It operates b/w -40 to 125°C, making it suitable for automotive applications. With a compact size of 3.5mm width and 4.5mm length, it is ideal for surface mount designs in automotive electronics.
MCP2561FDT-E/MF
MCP2561FDT-E/MF by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Ideal for automotive applications due to TS16949 screening and -40 to 125°C operating temperature range.
RTL8211FD-CG
Realtek Semiconductor
RTL8211FD-CG by Realtek Semiconductor is a network interface chip with 40 terminals and a square package shape. It operates at temperatures ranging from 0 to 70 °C and has a seated height of 0.9 mm. This Ethernet transceiver is commonly used in telecom applications.
MCP2561-E/P
MCP2561-E/P by Microchip Tech is a CAN transceiver with 1 Mbps data rate, 5V supply voltage, and -40 to 125°C operating temp. Ideal for automotive applications, it has 8 terminals in a rectangular package style suitable for TS16949 screening level.
RTL8211FSI-CG
Realtek's RTL8211FSI-CG is a 48-terminal Ethernet transceiver with 1000 Mbps data rate. It operates b/w -40°C to 85°C, making it suitable for telecom applications. This square-shaped chip carrier has a very thin profile and is surface-mountable, with terminals in quad position.
TCAN1042HDQ1
TCAN1042HDQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates at temperatures ranging from -55°C to 125°C and has a supply voltage of 5V. This network interface IC is designed for automotive applications, featuring AEC-Q100 screening and MILITARY temperature grade suitability.
LTC2875IDD#TRPBF
Linear Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
DP83826IRHBR
DP83826IRHBR by Texas Instruments is an Ethernet transceiver with a data rate of 100000 Mbps. It operates at a nominal voltage of 3.3V and has a max supply current of 53 mA. This network interface IC is suitable for industrial applications requiring high-speed data transmission.
MAX13054AEASA+
MAX13054AEASA+ by Analog Devices is a CAN transceiver with 2 Mbps data rate, operating at -40 to 125°C. It has 8 terminals in a small outline package suitable for network interfaces. The device supports a nominal voltage of 5V and consumes up to 70mA during operation.
TJA1051T/3/CM
NXP Semiconductors' TJA1051T/3/CM is a CAN transceiver with 5V supply voltage, supporting data rates up to 1 Mbps. It has a max supply current of 70mA and comes in a small outline package with Gull Wing terminals. Ideal for network interfaces, it offers reliable communication in automotive and industrial applications.
TJA1050T/N,118
NXP Semiconductors' TJA1050T/N,118 is a CMOS interface circuit with 1 Mbps data rate and 5V nominal voltage. It is designed for automotive applications, featuring a small outline package with 8 terminals and operating temperatures ranging from -40 to 125°C.
MCP2561FDT-E/SN
MCP2561FDT-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and 5V nominal voltage. The small outline package has dual terminals, matte tin finish, and measures 4.9mm x 3.9mm x 1.75mm in size.
KSZ8081RNBIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX3051ESA+
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3051ESA+ by Analog Devices is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It has a data rate of 1 Mbps and is ideal for industrial applications requiring small outline packages and surface mount capabilities.
MAX3051ESA
MAX3051ESA by Maxim Integrated is a network interface IC with 8 terminals, operating at 3.3V. It features a data rate of 1 Mbps and is ideal for industrial applications requiring an interface circuit. The small outline package with gull wing terminals makes it suitable for surface mount designs in harsh environments.
MAX3051EKA+T
Analog Devices' MAX3051EKA+T is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and is ideal for industrial applications requiring low profile, small outline packages in telecom interface circuits.
MAX3051EKA-T
MAX3051EKA-T by Maxim Integrated is a network interface IC with 8 terminals, operating at 3.3V. It features a data rate of 1 Mbps and is ideal for industrial applications requiring low profile, small outline packages. The IC operates in temperatures ranging from -40 to 85°C, making it suitable for various telecom interface circuits.
MAX3051ESA+T
Analog Devices' MAX3051ESA+T is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and is ideal for industrial applications requiring interface circuitry in small outline packages.
MAX3051ESA-T
MAX3051ESA-T by Maxim Integrated is a Network Interface with 8 terminals, operating at 3.3V. It has a data rate of 1 Mbps and is ideal for industrial applications requiring an interface circuit with a small outline package style. The IC operates in temperatures ranging from -40°C to 85°C, making it suitable for various telecom applications.
MAX3051ESA+TCJN
INTERFACE CIRCUIT;
MAX33041EASA+
CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
CAN TRANSCEIVER; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
MAX33041EASA+T
CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
CAN TRANSCEIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
MAX3057ASA+
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3057ASA
MAX3057ASA by Maxim Integrated is a small outline network interface IC with 8 terminals, operating at 5V. With a data rate of 2 Mbps, it's ideal for automotive applications due to its BICMOS technology and dual terminal position. The IC has a temperature range from -40°C to 125°C and low supply current of 0.072 mA.
MAX3057ASA+ by Analog Devices is a BICMOS technology network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. The device has matte tin terminal finish, gull wing form, and requires 5V nominal voltage.
MAX33040EAKA+T
CAN TRANSCEIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;
CAN TRANSCEIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved