Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LAN8742I-CZ-TR by Microchip Tech is a 100 Mbps Ethernet transceiver with 3.3V supply, -40 to 85°C temp range, and quad terminal position. It's a surface-mount chip carrier suitable for industrial applications requiring reliable network interfaces in compact spaces. With a slim profile and no-lead terminals, it offers high performance in telecom systems.
Median Price
$1.150
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Continental Prestige Electronics
$1.127
Argo Parts USA
Netroflash
Corohmni
Advanced Electronics
$1.184
$1.125
AZTECH Wire
$7.845
Aztec Data Supply Inc.
$7.910
Semicontronic
$1,000.000
$975.000
$970.000
RGB Technical Solutions
Surface mount technology allows for easy and efficient installation onto circuit boards, making this product convenient for assembly.
The square package shape helps in optimizing space on the circuit board and allows for a more compact design.
Operating at 3.3V ensures compatibility with common power supplies and reduces the need for additional components for voltage regulation.
Having 24 terminals provides flexibility in connectivity and supports various networking configurations.
The combination of chip carrier, heat sink/slug, and very thin profile package styles offers efficient thermal management and space-saving benefits.
With a high maximum operating temperature of 85°C, this product can withstand demanding industrial environments.
The low minimum operating temperature of -40°C ensures reliability in extreme cold conditions.
Quad terminal positioning simplifies installation and alignment on the circuit board, enhancing ease of use.
The low profile design with a maximum seated height of 1mm contributes to overall space efficiency in the system layout.
The slim width of 4mm enables a compact form factor, ideal for applications with limited space constraints.
With a length of 4mm, this product offers a square footprint, facilitating uniform placement on the PCB for efficient routing.
Industrial-grade temperature tolerance makes this product suitable for rugged environments and ensures consistent performance under varying conditions.
The absence of lead terminals enhances reliability and enables compliance with environmental regulations, making this product more sustainable.
Being an Ethernet transceiver, this product supports high-speed data transmission (100 Mbps) over Ethernet networks, making it ideal for networking applications.
Operating at a nominal supply voltage of 3.3V ensures compatibility with standard power sources and results in consistent performance.
The fine terminal pitch of 0.5mm enables high-density mounting and precise connections, enhancing overall reliability and signal integrity.
Supporting a data rate of 100 Mbps, this product offers high-speed connectivity for efficient data transmission in networking applications.
Network Interfaces LAN8742I-CZ-TR attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LAN8742I-CZ-TR Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Semitronics
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
43025-0400
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Vishay Telefunken
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ8091RNACA-TR
Microchip Technology
KSZ8091RNACA-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It has a square chip carrier package style, matte tin terminal finish, and operates b/w 0 to 70°C. Ideal for network interfaces in commercial-grade applications requiring surface mount components with a very thin profile.
MCP2562-E/MFVAO
MCP2562-E/MFVAO by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, -40 to 125°C temp range. Small outline package with 8 terminals, AEC-Q100 screening.
DP83848VYB/NOPB
Texas Instruments
DP83848VYB/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It operates b/w -40 to 105 °C, in industrial settings. This quad-terminal IC has a compact square package and is ideal for network interfaces requiring high-speed connectivity.
MCP2561-E/SNVAO
MCP2561-E/SNVAO by Microchip is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 70mA max current. It's AEC-Q100 certified for automotive use, featuring dual terminals in a small outline package. Ideal for network interfaces in automotive applications.
KSZ8863RLL-TR
Micrel
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8041FTL
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
TJA1052IT/2
NXP Semiconductors
NXP Semiconductors' TJA1052IT/2 is a network interface IC with 16 terminals, operating at 1 Mbps data rate and 5V nominal voltage. Designed for automotive applications, it has AEC-Q100 screening level and operates b/w -40 to 125°C.
DP83865DVH
DP83865DVH by Texas Instruments is an Ethernet transceiver IC with a data rate of 1000 Mbps. It operates at a supply voltage of 1.8V and has a terminal pitch of 0.5mm. This network interface chip is designed for commercial temperature grade applications.
WIZ810MJ
Wiznet
WIZ810MJ by Wiznet is a network interface with 56 terminals, operating b/w -40°C to 85°C. It supports circuits and has a nominal voltage of 3.3V. With a compact size of 25mm x 48mm, it's ideal for telecom applications requiring reliable connectivity in microelectronic assemblies.
SJA1105PELY
SJA1105PELY by NXP Semiconductors is a network interface with 159 terminals, supporting a data rate of 1000 Mbps. It operates b/w -40 to 125°C and has a max supply current of 200 mA. Ideal for telecom applications, this IC features a low profile grid array package style.
ATA6561-GBQW-N
ATA6561-GBQW-N by Microchip: CAN FD transceiver with 5 Mbps data rate, 70 mA supply current, and 5V nominal voltage. Ideal for automotive applications due to TS16949 screening level and -40 to 150 °C operating temperature range.
DP83848QSQ/NOPB
DP83848QSQ/NOPB by Texas Instruments is an Ethernet transceiver with 100Mbps data rate, operating at 3.3V. It features a CMOS technology, industrial temperature grade, and quad terminal position for surface mount applications in network interfaces.
PCA82C250T
Philips Semiconductors
PCA82C250T by Philips Semiconductors is a CAN transceiver with 1 transceiver. It operates at a nominal voltage of 5V and has a temperature range of -40 to 125°C. This network interface IC is commonly used in automotive applications.
TLE9252VLCXUMA1
Infineon Technologies
INTERFACE CIRCUIT; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
LAN8740A-EN-TR
LAN8740A-EN-TR by Microchip Tech is an Ethernet transceiver with 100 Mbps data rate. It operates at 0-70°C, has 32 terminals in a square chip carrier package style, and uses matte tin terminal finish. Ideal for network interfaces in commercial applications due to its TS16949 screening level and low profile design.
LAN8741A-EN
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ9031RNXVA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8741A-EN by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 32 terminals in a square chip carrier package for surface mount applications. Ideal for commercial telecom systems requiring TS16949 screening level.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
UJA1169ATK/F/3Z
UJA1169ATK/F/3Z by NXP Semiconductors is a CAN FD transceiver with 20 terminals, 15 Mbps data rate, and 67 mA supply current. It is ideal for automotive applications requiring AEC-Q100 screening and operates at a nominal voltage of 13V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8720A-CP-TR
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LAN8720AI-CP-ABC
Microchip Technology's LAN8720AI-CP-ABC is a surface mount Ethernet transceiver with 24 terminals and a package size of 4mm x 4mm. It operates at temperatures ranging from -40 to 85°C and has a data rate of 100 Mbps. This IC is commonly used in industrial applications requiring reliable network interfaces.
LAN8720AI-CP
LAN8720AI-CP by Microchip Technology is a network interface with 24 terminals, operating at 100 Mbps data rate. It has a supply voltage of 3.3V and max current of 54mA. Ideal for Ethernet transceiver applications in industrial settings due to its compact square package and wide temperature range (-40 to 85°C).
LAN8742A-CZ-TR
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8742A-CZ-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate. It operates at 0-70°C, has 24 terminals in a square chip carrier package style, and matte tin terminal finish. Ideal for network interfaces in commercial telecom applications due to its small size and surface mount capability.
LAN8710AI-EZK
LAN8710AI-EZK by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 3.3V power supply, square package shape, and matte tin terminal finish. Ideal for network interfaces in industrial applications due to its TS16949 screening level and compact chip carrier design.
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8720AI-CP-TR-ABC
LAN8720AI-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a low supply current of 54 mA at 3.3V, suitable for industrial applications requiring reliable network interfaces in compact square chip carrier packages.
LAN8710AI-EZK-TR
LAN8710AI-EZK-TR by Microchip is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3V power supply, matte tin finish, and square package shape suitable for industrial applications requiring network interfaces.
LAN8720A-CP-ABC
LAN8720A-CP-ABC by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a terminal pitch of 0.5mm, 24 terminals in a square package style, and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications requiring high-speed connectivity.
LAN8720A-CP
LAN8720A-CP by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a compact square package style and low power consumption of 54mA, suitable for network interfaces in commercial applications requiring reliable connectivity at temperatures ranging from 0 to 85°C.
LAN8742AI-CZ
LAN8742AI-CZ by Microchip is an Ethernet transceiver with 100 Mbps data rate. It operates at -40 to 85 °C, suitable for industrial use. The chip carrier package has 24 terminals in a square shape, making it ideal for network interfaces.
LAN8720A-CP-TR-ABC
LAN8720A-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It has a max supply current of 54mA and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications due to its small square package shape and surface mount capability.
LAN8710A-EZC-TR
LAN8710A-EZC-TR by Microchip: 3.3V supply, 100Mbps data rate, TS16949 screening. Ethernet transceiver for network interfaces in commercial applications with -40 to 85°C operating range and 32 terminals in a square chip carrier package.
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved