Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KSZ8081MLXCA-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 48 terminals in a low profile flatpack package. Ideal for network interfaces in commercial telecom applications.
Median Price
$1.300
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
$1.205
100+ parts
$1.150
1k+ parts
$1.095
10k+ parts
$1.077
Mouser Electronics
-
DigiKey
$1.285
Microchip Technology
$0.990
$0.910
$0.870
Newark
$1.340
$1.330
Adafruit Industries
$1.504
$1.429
Element14
$1.555
$1.443
Master Electronics
$0.935
$0.911
Verical
$1.100
$1.079
NAC Semi
$1.290
$1.170
$1.050
Nova Conductors
$1.580
Chip Stock
Vyrian
Electro Sonic
$1.320
IBS Electronics
$1.311
$1.269
Semicontronic
$1.080
$1.053
$1.048
Ampacity Inc.
Component Stockers USA
$1.450
$1.280
$1.250
Corohmni
$1.460
Advanced Electronics
Argo Parts USA
$1.577
Bastille Electronics
$1.501
$1.426
$1.406
Modulus Dynamics
$1.751
$1.734
$1.681
Aztec Data Supply Inc.
$8.101
RC Electronics
$1.530
$1.400
$1.350
Lixinc
Authorized Procurement Solutions
Fulton Briggs Corp.
Continental Prestige Electronics
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
iodParts Technologies Inc.
$3.928
Robosynatics
$85.723
Lucentia Tech
Durable material that can withstand various environmental conditions.
Easy to install on PCBs for efficient assembly.
High quality assurance and reliability in manufacturing process.
Compact design that saves space on the PCB.
Provides multiple connection points for enhanced functionality.
Can operate efficiently in moderate temperature conditions.
Can withstand lower temperature environments.
Provides a corrosion-resistant finish for long-lasting connections.
Optimal positioning for efficient connectivity.
Low profile design for space-constrained applications.
Compact size for efficient PCB layout.
Compact size for space-saving applications.
Suitable for standard commercial operating conditions.
Provides secure connections for improved reliability.
Specifically designed for Ethernet communication applications.
Standard voltage requirement for easy integration in existing systems.
Fine pitch for high-density PCB layouts.
High-speed data transmission capability for efficient networking.
Network Interfaces KSZ8081MLXCA-TR attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
KSZ8081MLXCA-TR Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Lead Frame 22/Dec/2016 KSZ8081MNX/RNB 24/Jan/2018
PCN Assembly/Origin - Mult Devices Assembly 19/Jan/2018
PCN Packaging - MBB/Label Chgs 16/Nov/2018
PCN Part Number - Micrel to Microchip PN Changes 7/Oct/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Won-top Electronics
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Fairchild Semiconductor
EU2B-YS3203C
Idec
ROTARY SWITCH;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AR8033-AL1A
Qualcomm Atheros
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
MCP2561T-E/MF
MCP2561T-E/MF by Microchip: CAN transceiver for automotive apps. Operates at 5V, 1Mbps data rate. Small outline package, -40 to 125°C temp range, TS16949 screening level.
TJA1050T/V,112
NXP Semiconductors
NXP Semiconductors' TJA1050T/V,112 is a network interface IC with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature range of -40 to 125°C. The small outline package with gull wing terminals makes it ideal for surface mount designs in various electronic systems.
PM8800A
PM8800A by STMicroelectronics is a network interface IC with 16 terminals, operating b/w -40 to 85°C. It features a small outline package style and supports circuits in telecom applications. With a supply voltage of 1.8V, it has a terminal pitch of 0.65mm and peak reflow temperature of 260°C.
KSZ8041FTLI-TR
Microchip's KSZ8041FTLI-TR is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 48-terminal flatpack package suitable for industrial applications. With a supply voltage of 3.3V and low current draw of 58.3mA, it's ideal for network interfaces in various electronic devices.
LAN8720A-CP
LAN8720A-CP by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a compact square package style and low power consumption of 54mA, suitable for network interfaces in commercial applications requiring reliable connectivity at temperatures ranging from 0 to 85°C.
LAN8720A-CP-ABC
LAN8720A-CP-ABC by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a terminal pitch of 0.5mm, 24 terminals in a square package style, and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications requiring high-speed connectivity.
USB3340-EZK-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: QCCN; Package Shape: SQUARE;
PCA82C251T/N3
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
KSZ9031MNXCA
KSZ9031MNXCA by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 64 terminals in square chip carrier package suitable for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.
MCP2562FDT-E/SNVAO
MCP2562FDT-E/SNVAO by Microchip: CAN FD transceiver with 8 Mbps data rate, operates at -40 to 125 °C, suitable for automotive applications. Features AEC-Q100 screening level, small outline package style, and matte tin terminal finish.
Qualcomm
Qualcomm's AR8033-AL1A is an Ethernet transceiver with 1000 Mbps data rate, operating at 0-70°C. It features a square chip carrier package with 48 terminals and requires 3.3V supply voltage. Ideal for network interfaces in commercial telecom applications due to its compact size and low supply current of 113.7 mA.
VSC8514XMK-11
VSC8514XMK-11 by Microchip: Ethernet transceiver with 4 transceivers, 1000 Mbps data rate. Operates at -40 to 125°C, suitable for network interfaces. Package style: chip carrier, heat sink/slug; surface mountable square shape with 138 terminals.
USB3320C-EZK
USB3320C-EZK by Standard Microsystems is a surface mount network interface with 1 function and 32 terminals. It has a square package shape, very thin profile, and operates in industrial temperature range (-40 to 85 °C). It is commonly used as an interface circuit for telecom applications.
KSZ8721BLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
SN65HVD234DG4
SN65HVD234DG4 by Texas Instruments is a Network Interface IC with 3.3V supply voltage, operating temperature range of -40 to 125°C, and Gull Wing terminal form. It is ideal for automotive applications requiring small outline package style and interface circuit telecom IC type.
KSZ8061RNBW
Microchip Technology's KSZ8061RNBW is an Ethernet transceiver IC with a data rate of 100 Mbps. It operates in industrial temperature range (-40 to 105°C) and has a supply voltage of 1.2V. The chip carrier package style with matte tin finish and quad terminal position makes it suitable for automotive applications meeting AEC-Q100 standards.
TJA1050T/VM,112
NXP Semiconductors' TJA1050T/VM,112 is a Network Interface with 1 Mbps Data Rate and 5V Nominal Voltage. It is designed for automotive applications, featuring a CMOS Technology and operating temperature range from -40 to 125°C. The package style is small outline with dual terminal position in a rectangular shape.
KSZ8091RNACA-TR
KSZ8091RNACA-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It has a square chip carrier package style, matte tin terminal finish, and operates b/w 0 to 70°C. Ideal for network interfaces in commercial-grade applications requiring surface mount components with a very thin profile.
LAN8710AI-EZK-ABC
LAN8710AI-EZK-ABC by Microchip: Ethernet transceiver with 100 Mbps data rate, operates in -40 to 85 °C range. Features 32 terminals in a square chip carrier package for industrial applications. TS 16949 screening level ensures high quality and reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KSZ8081RNBIA-TR
Microchip Technology's KSZ8081RNBIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and terminal pitch of 0.5 mm. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8895MQXIA
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
Microchip Technology's KSZ8895MQXIA is an Ethernet switch with 5 transceivers, supporting data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.2 V. The package style is flatpack, fine pitch, with 128 terminals for surface mount applications.
KSZ8081RNAIA-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8081RNAIA-TR by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and very thin profile for industrial applications requiring reliable network interfaces.
KSZ8863RLLI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8995MAI
LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
KSZ8895RQXIA
KSZ8895RQXIA by Microchip: 128 terminals, 5 transceivers, 100 Mbps data rate. Ideal for Ethernet switch applications in industrial settings. Operates b/w -40 to 85°C with a compact rectangular package design.
KSZ8863RLLI-TR
KSZ8081RNACA
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Microchip's KSZ8081RNACA is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a square chip carrier package style, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact size and low profile design.
KSZ8081RNBCA-TR
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Microchip's KSZ8081RNBCA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at temperatures from 0 to 70°C. It features a square chip carrier package style with matte tin finish, suitable for network interfaces in commercial-grade telecom applications.
KSZ8081RNACA-TR
Microchip's KSZ8081RNACA-TR is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for network interfaces in commercial applications requiring a compact design and high-speed connectivity.
KSZ8081RNACATR
Micrel's KSZ8081RNACATR is a 3.3V Ethernet transceiver with 100Mbps data rate, ideal for network interfaces. It features a square surface mount package style with 24 terminals and operates b/w 0-70°C, making it suitable for commercial applications.
KSZ8081MNXIA-TR
Microchip Technology's KSZ8081MNXIA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
KSZ8795CLXIC
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved