Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): FLANGE MOUNT; Terminal Finish: MATTE TIN OVER NICKEL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Modulus Dynamics
$1.252
$1.202
$1.152
Corphita
Small Signal Field Effect Transistors (FET) IRF3415-024 attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Infineon Technologies
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
IRF3415-024 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Diodes Incorporated
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
2N7002BKS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-609 Code: e3; Terminal Finish: TIN;
DMG1012UW-7
DMG1012UW-7 by Diodes Inc. is a N-channel FET with 20V DS breakdown voltage and 1A max drain current. Ideal for switching applications, it operates in enhancement mode with 0.45 ohm on-resistance. Its small outline package and -55 to 150°C operating range make it suitable for various electronic devices.
FDC5612
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Style (Meter): SMALL OUTLINE; No. of Elements: 1;
FDG6301N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Terminal Position: DUAL; Package Shape: RECTANGULAR;
2N7002-TP
2N7002-TP by Micro Commercial Components is a N-channel FET with 60V breakdown voltage and 7.5 ohm on-resistance, ideal for switching applications. Operating in enhancement mode, it has a max drain current of 0.34A and peak reflow temperature of 260°C. This small outline transistor features a gull wing terminal form and metal-oxide semiconductor technology.
S2N7002ET1G
S2N7002ET1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.26A ID, and 2.5 ohm RDS(ON). Ideal for SWITCHING applications in small outline packages, it operates b/w -55 to 150 °C with Matte Tin finish and built-in diode.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
FDY300NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .625 W; Terminal Position: DUAL; JESD-609 Code: e3;
2N7000
Tt Electronics Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Minimum DS Breakdown Voltage: 60 V; Maximum Drain-Source On Resistance: 5 ohm; Qualification: Not Qualified;
2N7002K
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 350 W; Minimum DS Breakdown Voltage: 60 V; JESD-30 Code: R-PDSO-G3;
2N7002T
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e0; Package Shape: RECTANGULAR; Maximum Feedback Capacitance (Crss): 5 pF;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N7000TA
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Shape: ROUND; Transistor Application: SWITCHING; Maximum Drain Current (ID): .2 A;
SI4459ADY-T1-GE3
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: .005 ohm;
SI1308EDL-T1-GE3
Vishay Intertechnology
SI1308EDL-T1-GE3 by Vishay Intertechnology is a N-channel FET with 30V DS breakdown voltage and 1.4A max drain current. Ideal for switching applications, it features a built-in diode, 0.132 ohm max on resistance, and operates in enhancement mode at up to 150°C.
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Minimum DS Breakdown Voltage: 60 V; JEDEC-95 Code: TO-92;
BSS138WQ-7-F
BSS138WQ-7-F by Diodes Inc. is a small signal N-channel FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max power dissipation of 0.2W and can handle a max drain current of 0.2A.
NDS7002A-F169
NDS7002A-F169 by Onsemi is a small signal FET with N-channel polarity, suitable for switching applications. It features a 60V min DS breakdown voltage, 0.3W max power dissipation, and 150°C max operating temperature. With a built-in diode and Gull Wing terminals, it offers efficient enhancement mode operation in a compact package.
BSS84PH6433
Infineon Technologies
BSS84PH6433 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, 0.17A ID, and 8 ohm RDS(on). Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IRF3000PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Maximum Time At Peak Reflow Temperature (s): 30;
IRF3415-002
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Elements: 1; Qualification: Not Qualified; Terminal Form: THROUGH-HOLE;
IRF3415-003
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-609 Code: e3; Transistor Element Material: SILICON; Package Style (Meter): FLANGE MOUNT;
IRF3415-004
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; No. of Elements: 1; Terminal Finish: MATTE TIN OVER NICKEL;
IRF3415-005
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Maximum Drain Current (ID): 37 A; Transistor Element Material: SILICON;
IRF3415-006
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain-Source On Resistance: .042 ohm; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
IRF3415-009
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Finish: MATTE TIN OVER NICKEL; Package Body Material: PLASTIC/EPOXY; Terminal Form: THROUGH-HOLE;
IRF3415-010
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
IRF3415-011
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Style (Meter): FLANGE MOUNT;
IRF3415-012
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: .042 ohm; Package Shape: RECTANGULAR;
IRF3415-013
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain-Source On Resistance: .042 ohm; Operating Mode: ENHANCEMENT MODE; Package Shape: RECTANGULAR;
IRF3415-015
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Drain Current (ID): 37 A; Maximum Drain-Source On Resistance: .042 ohm; JEDEC-95 Code: TO-220AB;
IRF3415-017
IRF3415-018
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Drain Current (ID): 37 A; JEDEC-95 Code: TO-220AB;
IRF3415-019
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Terminal Form: THROUGH-HOLE; Qualification: Not Qualified;
IRF3415-029
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: ENHANCEMENT MODE; Terminal Form: THROUGH-HOLE; No. of Elements: 1;
IRF3415-030
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: R-PSFM-T3; Transistor Element Material: SILICON; Terminal Position: SINGLE;
IRF3415-031
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Position: SINGLE; JESD-30 Code: R-PSFM-T3; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Minimum DS Breakdown Voltage: 150 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: THROUGH-HOLE;
IRF3415-009PBF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Position: SINGLE; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved