Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IKD10N60RATMA1 by Infineon is an N-CHANNEL IGBT with 600V VCE, 20A IC, and 150W Ptot. It's used for power control applications due to its built-in diode, 428ns toff, and 24ns ton. The GULL WING terminal form and SMALL OUTLINE package make it suitable for surface mount designs.
Median Price
$1.350
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$0.424
100+ parts
$0.402
1k+ parts
-
10k+ parts
Chip1Stop
$1.362
$0.830
$0.539
Mouser Electronics
$1.790
$0.764
$0.553
$0.515
DigiKey
$0.552
$0.451
RS (Exports)
$1.338
$1.191
Verical
Nova Conductors
$0.806
Digiode
$1.294
Chip Stock
Vyrian
Sensible Micro Corp
ComSIT Distribution GmbH
Ampacity Inc.
$0.428
Semicontronic
$0.417
$0.415
Modulus Dynamics
$0.772
$0.741
$0.710
Aranea Global
$0.790
$0.758
Argo Parts USA
Continental Prestige Electronics
Aztec Data Supply Inc.
$1.030
Corphita
$1.226
Corohmni
$1.769
Microchip USA
$5.540
Authorized Procurement Solutions
Provides excellent thermal properties and electrical insulation, ensuring reliability and long-term performance.
Offers improved efficiency and performance in power control applications.
Simplifies circuit design and saves space by integrating a diode within the transistor.
Specifically designed for power control applications, delivering reliable and efficient performance.
Allows for easy and efficient PCB assembly, reducing production time and costs.
Can operate at high temperatures without compromising performance, ensuring reliability in various environments.
Suitable for high voltage applications, providing a wide voltage range for diverse use cases.
Capable of handling high current loads, making it ideal for power control applications.
Offers fast switching speeds, improving efficiency and response time in power control operations.
Insulated Gate Bipolar Transistors (IGBT) IKD10N60RATMA1 attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Infineon Technologies
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Gate-Emitter Threshold Voltage:
Maximum Gate-Emitter Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
IKD10N60RATMA1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Transistor & Electronic
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
IHW15N120E1XKSA1
Infineon Technologies
IHW15N120E1XKSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 1200V and a Max Collector Current of 30A. It is designed for POWER CONTROL applications, featuring a Nominal Turn Off Time of 1450ns. The transistor comes in a RECTANGULAR package style with THROUGH-HOLE terminals, making it suitable for various power control systems.
SKM100GB12T4G
Semikron International
SKM100GB12T4G by Semikron is an N-CHANNEL IGBT with 2 elements, built-in diode, VCEsat of 2.1V, and max current of 150A. Ideal for power control applications with a max VCE of 1200V and operating temp up to 175°C. Package style is flange mount with isolated case connection.
IXBK55N300
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 625 W; Maximum Collector Current (IC): 130 A; Terminal Form: THROUGH-HOLE;
IRG7PH50K10DPBF
International Rectifier
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 400 W; Maximum Collector Current (IC): 90 A; Maximum Fall Time (tf): 110 ns; Maximum Gate-Emitter Threshold Voltage: 7.5 V;
FGAF40N60SMD
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 80 A; Maximum Gate-Emitter Voltage: 20 V;
IXXX300N60B3
Littelfuse
The Littelfuse IXXX300N60B3 is an N-CHANNEL IGBT with 600V VCEsat, 550A IC, and 2300W power dissipation. Ideal for power control applications, it has a turn-off time of 430ns and operates b/w -55°C to 175°C.
FZ1200R45HL3BPSA1
FZ1200R45HL3BPSA1 by Infineon Technologies is an N-CHANNEL IGBT with 4500V max collector-emitter voltage. It has a complex configuration, 6670ns turn-off time, and 1100ns turn-on time. Ideal for power control applications, this device features a plastic/epoxy package body and operates from -40°C.
IXYN100N120C3H1
IXYN100N120C3H1 by Littelfuse is an N-CHANNEL IGBT with 1200V max collector-emitter voltage, 134A max collector current, and 690W max power dissipation. Ideal for power control applications due to its single configuration with built-in diode and fast turn-off time of 265ns.
IXYP20N65C3D1M
IXYP20N65C3D1M by Littelfuse is an N-CHANNEL IGBT with 650V VCE, 18A IC, and 2.5V VCEsat. Ideal for POWER CONTROL applications, it features a single configuration with built-in diode and operates b/w -55 to 175 °C temperature range.
AUIRG4BC30U-S
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 23 A; Qualification: Not Qualified;
IXXX100N60B3H1
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 695 W; Maximum Collector Current (IC): 200 A; Maximum Collector-Emitter Voltage: 600 V; Terminal Finish: Matte Tin (Sn);
FP10R12W1T4PB11BPSA1
Infineon's FP10R12W1T4PB11BPSA1 is an N-CHANNEL IGBT with 1200V max collector-emitter voltage, 20A max collector current, and 500ns nominal turn off time. Ideal for power control applications due to its complex configuration and silicon transistor element material.
IRG4PH20KPBF
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 24 W; Maximum Collector Current (IC): 11 A; Terminal Form: THROUGH-HOLE;
FGA30T65SHD
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 238 W; Maximum Collector Current (IC): 60 A; No. of Terminals: 3;
IXYF40N450
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 60 A; Maximum VCEsat: 3.9 V;
IGU04N60TAKMA1
IGU04N60TAKMA1 by Infineon is an N-CHANNEL IGBT with a 600V max collector-emitter voltage and 9.5A max collector current. It has a single configuration with built-in diode, ideal for power control applications. Featuring a turn-off time of 268ns and turn-on time of 24ns, it operates in temperatures as low as -40°C.
RGC80TSX8RGC11
ROHM
ROHM RGC80TSX8RGC11 is an N-CHANNEL IGBT with 1800V VCE, 80A IC, and 535W power dissipation. Ideal for power control applications, it features a built-in diode, 725ns turn-off time, and -40 to 175°C operating temperature range.
FP25R12W2T4PBPSA1
FP25R12W2T4PBPSA1 by Infineon Technologies is an N-CHANNEL IGBT with 7 elements, max. collector-emitter voltage of 1200V, and max. collector current of 39A. It is used for power control applications due to its complex configuration and nominal turn off time of 685ns. The transistor's package style is flange mount with a rectangular shape and isolated case connection.
IKW15T120FKSA1
IKW15T120FKSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max voltage of 1200V and current of 30A. It has a turn-off time of 720ns and turn-on time of 85ns, making it ideal for power control applications. The transistor comes in a rectangular package with through-hole terminals and operates at temperatures up to 150°C.
IRGP4266DPBF
N-CHANNEL; Surface Mount: NO; Maximum Power Dissipation (Abs): 455 W; Maximum Collector Current (IC): 140 A; Maximum Gate-Emitter Threshold Voltage: 7.7 V; Peak Reflow Temperature (C): NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IKD15N60RATMA1
IKD15N60RATMA1 by Infineon is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 30A max collector current, and 250W max power dissipation. Ideal for power control applications due to its single configuration with built-in diode and fast turn-off time of 430ns. Suitable for surface mount with gull wing terminals in a small outline package shape.
IKD15N60RFATMA1
IKD15N60RFATMA1 by Infineon is an N-CHANNEL IGBT with 600V VCE, 30A IC, and 250W power dissipation. It operates up to 175°C making it suitable for high-power applications in industries like automotive and renewable energy.
IKD15N60RFAATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 30 A; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
IKD15N60RFXT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 30 A; Nominal Turn Off Time (toff): 193 ns; No. of Terminals: 2;
IKD15N60RBTMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 30 A; Nominal Turn On Time (ton): 26 ns;
IKD10N60RFA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; Package Body Material: PLASTIC/EPOXY;
IKD15N60RF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 15 A; Terminal Form: GULL WING;
IKD10N60RFAATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; Peak Reflow Temperature (C): NOT SPECIFIED;
IKD15N60RFA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 240 W; Maximum Collector Current (IC): 30 A; Package Shape: RECTANGULAR;
IKD10N60RFATMA1
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; Maximum Collector-Emitter Voltage: 600 V; Terminal Finish: TIN;
IKD10N60RFXT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 20 A; Maximum Collector-Emitter Voltage: 600 V; Nominal Turn Off Time (toff): 198 ns;
IKD10N60RF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; Maximum Gate-Emitter Threshold Voltage: 5.7 V;
IKD15N60RC2
N-Channel; Maximum Power Dissipation (Abs): 115.4 W; Maximum Collector Current (IC): 28 A; Maximum VCEsat: 2.3 V; Nominal Turn Off Time (toff): 414 ns; Moisture Sensitivity Level (MSL): 1;
IKD10N60RAATMA2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 20 A; Transistor Application: GENERAL PURPOSE; Terminal Form: GULL WING;
IKD10N60RBTMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; No. of Elements: 1;
IKD15N60R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 30 A; Maximum Operating Temperature: 175 Cel;
IKD15N60RA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Collector Current (IC): 30 A; Transistor Element Material: SILICON;
IKD10N60RA
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; Terminal Form: GULL WING;
IKD10N60R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 20 A; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved