Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; Technology: GAAS; Power Supplies (V): -5; Nominal On Time: .006 us; Maximum Input Power (CW): 26.99 dBm; Characteristic Impedance: 50 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Nova Conductors
Digiode
Sensible Micro Corp
Speed Components Ltd
Parana Technologies
$1.507
$1.401
IDEA Electronic Components Group
$1.620
$1.539
DigiPath Technology Company
$2.527
$2.426
Corohmni
$2.797
One Stop Electronics
$15.000
AZTECH Wire
$17.270
Ampacity Inc.
$24.000
Semicontronic
$32.000
$31.200
$31.040
Lixinc
Continental Prestige Electronics
Aranea Global
RC Electronics
$98.460
$89.350
$86.190
Authorized Procurement Solutions
Argo Parts USA
Corphita
RF/Microwave Switches HMC347 attributes and parameters. Explore more RF/Microwave Switches devices from Hittite Microwave
Compression Point (1 dB):
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
Minimum Isolation:
No. of Functions:
Nominal On Time:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
HMC347 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-576-5761, 5962015765761
NIIN
015765761
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
1554216002
Molex
WIRE AND CABLE;
1N4148WS
Synsemi
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
Vishay Telefunken
Gulf Semiconductor
ADRF5300BCCZN-R7
Analog Devices' ADRF5300BCCZN-R7 is a SPDT RF switch with 50 ohm impedance, operating from 24-32 GHz. It has a CW input power of 28 dBm and VSWR of 1.17, suitable for high-frequency applications in temperatures ranging from -40 to 105°C. Ideal for surface mount setups with reflective port termination.
SPM3221
Onsemi's SPM3221 RF/Microwave Switch offers 1.5 VSWR, 27 dBm compression point, and 0.4 dB max insertion loss. Ideal for SPDT applications in GAAS technology with 2500 MHz operating frequency range.
TGS2352-2-SM
Triquint Semiconductor
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 22; Package Body Material: CERAMIC; Technology: GAN; Minimum Operating Frequency: 500 MHz;
UPG137GV-E1
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
ADRF5019BCPZN
Analog Devices' ADRF5019BCPZN is a 16-terminal RF switch with max input power of 23 dBm and compression point at 28 dBm. Ideal for diversity switching applications, it operates b/w -40 to 105°C, with frequency range from 100 MHz to 13 GHz.
PE42562A-X
Psemi
SP6T; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
HMC104
Analog Devices' HMC104 is a GAAS SPDT RF switch with -5V power supply, operating from -55°C to 125°C. It supports frequencies up to 6GHz and features absorptive port termination. Ideal for RF/microwave applications requiring high-frequency switching capabilities.
RFX2411N
Skyworks Solutions
DIVERSITY SWITCH;
XB-11-2
Aeroflex/kdi
Aeroflex/kdi's XB-11-2 is an RF/Microwave SPDT switch with 50 ohm impedance. It handles up to 30 dBm CW power, VSWR of 1.65, and operates b/w -55°C to 85°C. Ideal for applications requiring frequency range of 20-100 MHz in various industries.
ADG919BRMZ-REEL
ADG919BRMZ-REEL by Analog Devices is a CMOS RF/Microwave Diversity Switch with 8 terminals. It offers 1.25 dB max insertion loss, 34 dB min isolation, and operates from 0 to 4000 MHz. Ideal for applications requiring high-frequency signal routing in wireless communication systems.
UPG2054K-A
RF/Microwave Switches;
HMC182S14TR
SP4T; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb);
UPG183GR-E1
SP4T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 22 dB;
UPG2415T6X-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Additional Features: HIGH ISOLATION;
SW-254
Tyco Electronics M/a-com
SP4T; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 2.3; Maximum Insertion Loss: 1.9 dB; Maximum Operating Frequency: 2000 MHz;
HMC284AMS8G
Hittite Microwave
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; JESD-609 Code: e0;
UPG139GV-E1
DPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -50 Cel;
SKYA21001
SKYA21001 by Skyworks Solutions is an RF/Microwave Switch with max input power of 36 dBm, VSWR of 1.45, and max insertion loss of 0.7 dB. It's a SPDT device with freq range from 20 MHz to 3 GHz, ideal for high-frequency applications requiring precise signal switching in various temperature environments.
UPG2409TB-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .1 us;
HMC348LP3ETR
Analog Devices' HMC348LP3ETR is a SPDT RF/Microwave switch with 1dB max insertion loss, 45dB min isolation, and 30dBm CW input power. It operates from -40 to 85 °C, suitable for applications requiring high-frequency signal routing in wireless communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC347ALP3ETR
Analog Devices' HMC347ALP3ETR is an RF/Microwave switch with max input power of 26.99 dBm, insertion loss of 2.5 dB, and operating frequency range from 0 to 14000 MHz. Ideal for diversity switching applications due to its construction as a component with characteristic impedance of 50 ohm.
HMC347ALP3E
Analog Devices' HMC347ALP3E is an RF/Microwave SPDT switch with 2.4 dB max insertion loss, 26.99 dBm CW power handling, and 0-14000 MHz frequency range. Ideal for applications requiring high-frequency signal routing in environments ranging from -55 to 85°C.
HMC349ALP4CETR
Analog Devices' HMC349ALP4CETR is a RF/Microwave switch with max input power of 26.53 dBm, insertion loss of 1.7 dB, and operating frequency range from 100 MHz to 4000 MHz. Ideal for diversity switching applications due to its wide temperature range (-40°C to 85°C) and impedance of 50 ohm.
HMC349LP4CETR
SPDT;
HMC345ALP3E
Analog Devices' HMC345ALP3E is a SP4T RF/Microwave switch with 2.9 dB max insertion loss and 23.98 dBm CW input power. Operating from -40 to 85°C, it covers frequencies from 0 to 8000 MHz. Ideal for applications requiring high-frequency signal routing in various temperature environments.
HMC347LP3ETR
Analog Devices' HMC347LP3ETR is a SPDT RF/Microwave switch with 2.4 dB max insertion loss and 33 dB min isolation. It operates from -55 to 85°C, handles up to 26.99 dBm CW power, and has a compression point of 23 dBm. Ideal for applications requiring high-frequency signal routing in communication systems.
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC347A-SX
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Maximum Insertion Loss: 2.7 dB; No. of Functions: 1; Nominal On Time: .1 us;
HMC347A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Maximum Operating Frequency: 20000 MHz; Package Equivalence Code: DIE OR CHIP; Nominal On Time: .1 us;
HMC349AMS8GETR
DIVERSITY SWITCH; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 33.6 dBm; Maximum Insertion Loss: 2.1 dB; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT;
Analog Devices' HMC349AMS8GETR is an RF/Microwave switch with max input power of 33.5 dBm, insertion loss of 2.1 dB, and operating frequency range from 100 MHz to 4 GHz. Ideal for diversity switching applications due to its 50 ohm impedance and wide temperature range (-40°C to 125°C).
HMC349MS8GE
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 4000 MHz; No. of Functions: 2;
HMC349MS8GETR
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Matte Tin (Sn); Maximum Insertion Loss: 2.1 dB;
HMC349LP4CE
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC321ALP4E
HMC321ALP4E by Analog Devices is an RF/Microwave switch with a max input power of 26.02 dBm and a max insertion loss of 3.1 dB. It operates in a frequency range from 0 MHz to 8000 MHz and is commonly used in applications requiring high-frequency switching, such as telecommunications and radar systems.
HMC349AMS8G
DIVERSITY SWITCH; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 33.6 dBm; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Frequency: 4000 MHz;
DIVERSITY SWITCH; Additional Features: CMOS COMPATIBLE; Maximum Operating Temperature: 125 Cel; Terminal Finish: TIN LEAD; Maximum Insertion Loss: 2.1 dB; Minimum Operating Frequency: 100 MHz;
HMC349AMS8GE
DIVERSITY SWITCH; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Input Power (CW): 33.6 dBm; Maximum Insertion Loss: 2.1 dB; Minimum Operating Temperature: -40 Cel;
DIVERSITY SWITCH; Minimum Operating Frequency: 100 MHz; Maximum Input Power (CW): 33.5 dBm; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Additional Features: CMOS COMPATIBLE;
HMC349AMS8GTR
DIVERSITY SWITCH; Additional Features: CMOS COMPATIBLE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 4000 MHz; Maximum Insertion Loss: 2.1 dB; Maximum Input Power (CW): 33.5 dBm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved