Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HR10A-10P-10S(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and snap coupling type. It is used for cable mounting applications requiring a female plug with solid backshell and nickel-plated zinc alloy/brass shell material.
Median Price
$20.137
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$14.800
100+ parts
$10.600
1k+ parts
-
10k+ parts
Misumi USA
$16.440
Element14
$17.110
$16.150
$14.160
Heilind Electronics
$18.440
$14.635
$14.406
RS (Exports)
$17.535
Farnell
$20.390
$14.848
$13.732
Interstate Connecting
$21.667
$19.275
Markertek
$22.760
Newark
$27.380
$21.420
Master Electronics
$28.230
$20.900
$20.850
Distrelec
Verical
$14.491
Nova Conductors
$13.450
Electro Sonic
$19.030
$13.770
$12.630
Vyrian
Cogito LLC
IBS Electronics
$22.300
Semtec, LLC
ACDS - Activité Composants Distribution Service
Benley Electronics
$0.650
Aztec Data Supply Inc.
$4.385
Ampacity Inc.
$10.220
Semicontronic
$12.110
$11.807
$11.747
CoreStaff
$13.035
$7.215
Corohmni
$13.455
Advanced Electronics
$13.859
$13.166
Continental Prestige Electronics
$15.380
$10.980
Authorized Procurement Solutions
Argo Parts USA
Glotronic Ltd.
Perfect Parts
Bastille Electronics
Silver is known for good conductivity and corrosion resistance, ensuring reliable connections.
Snap coupling type allows for quick and easy connection and disconnection, saving time during installations or maintenance.
Nickel plating provides durability and resistance to wear and tear, extending the lifespan of the connectors.
Circular connectors are versatile and commonly used in various applications due to their robust design and stable performance.
Having 10 contacts allows for multiple connections or signals to be transmitted simultaneously, increasing functionality.
Solid backshell provides additional protection to the connector and ensures secure connections in demanding environments.
Cable mounting type allows for easy integration with existing cables, simplifying the installation process.
Zinc alloy and brass construction offers a balance of strength and conductivity, making the connectors suitable for various industrial applications.
Solder termination provides a secure and permanent connection, preventing signal loss or interference.
Female contacts are typically more secure and offer better mating connections, ensuring reliable signal transmission.
Plug-style connectors are easy to use and offer quick connections, making them ideal for applications where frequent plugging and unplugging is required.
Size 10 shell is commonly used and offers a good balance between compactness and functionality, suitable for a wide range of applications.
Other Function Circular Connectors HR10A-10P-10S(73) attributes and parameters. Explore more Other Function Circular Connectors devices from Hirose Electric
Additional Features:
Backshell Type:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
HR10A-10P-10S(73) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1554216002
Molex
WIRE AND CABLE;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
1N4148WS
Rugao Dachang Electronic
Digitron Semiconductors
FGA.0B.306.CLAD42Z
Lemo Usa
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
21033112801
Harting Electronics & Kg
CIRCULAR CONNECTOR;
SRCN6A13-3S
Japan Aviation Electronics Industry
SRCN6A13-3S by Japan Aviation Electronics: Circular connector with 3 contacts, silver finish, and aluminum alloy shell. Ideal for applications requiring threaded coupling, operating b/w -25°C to 85°C on panels. Female contact type suitable for solder termination in various industries.
1663116
Phoenix Contact
Phoenix Contact 1663116 is a threaded circular connector with polyamide insulator material. Featuring 5 contacts, it has a solid backshell and male contact gender. Ideal for cable mounting applications, specifically designed as a plug connector.
UTG0128S
Souriau-sunbank Connection Technologies
UTG0128S by Souriau-sunbank is a 0.748" circular connector with 8 female contacts for panel mounting. Featuring crimp termination, it is ideal for various applications requiring reliable connectivity in industrial settings.
YHDP24-24-31PEL024
TE Connectivity
TE Connectivity's YHDP24-24-31PEL024 is a circular connector with 31 contacts, rated at 250V and 13A. Made of glass-filled polyamide, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized male plug with strain relief.
206043-5
TE Connectivity 206043-5 is a threaded circular connector with 600V rated voltage and 105°C max operating temp. Ideal for applications requiring a polarized, immersion-resistant female receptacle with 14 contacts.
HD36-24-31ST-072
TE Connectivity's HD36-24-31ST-072 circular connector features 31 contacts, rated at 13A and 250V. With a body size of 2.57" x 1.942" x 1.942", it is ideal for applications requiring a polarized, aluminum alloy plug with strain relief mounting for secure cable connections in environments ranging from -55°C to 125°C.
1200710041
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
120-1906-000
Itt Cannon
120-1906-000 by ITT Cannon is a SNAP circular connector with COPPER ALLOY contacts and SILVER finish. It features a SOLID backshell, ELASTOMERIC shell material, and is a MALE plug type suitable for CABLE mounting applications.
1200060014
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
206434-1
Tyco Electronics Amp
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mixed Contacts: NO; Contact Material: NOT SPECIFIED;
HD36-18-14SN-059
TE Connectivity's HD36-18-14SN-059 is a circular connector with 14 contacts, rated at 250V and 13A. With aluminum alloy shell material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, female contact style plug with strain relief mounting on cables.
HR10A-7P-6S(73)
Hirose Electric
HR10A-7P-6S(73) by Hirose Electric is a circular connector with 6 contacts, matte tin finish, and polyamide insulator. With a body diameter of 0.453 inch and shell size of 7, it is ideal for cable mounting applications. Featuring corrosion-resistant properties and a temperature range from -25 to 85°C, this connector is suitable for various industrial environments.
TA3MS20
Switchcraft
192900-0313
192900-0313 by ITT Cannon is a circular connector with 12 contacts, bayonet coupling, and polyamide insulator. It features a solid backshell, corrosion-resistant design, and is a receptacle type for panel mounting. Ideal for applications requiring reliable female connectors in harsh environments.
HDP24-24-9PN
TE Connectivity's HDP24-24-9PN is a circular connector with 9 contacts, rated at 250V and 100A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a male receptacle connector with solid backshell, such as in panels for mains connectors at 115/230VAC.
1200652265
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
M12A-03PMMS-SH8001
Amphenol
T4133412041-000
TE Connectivity's T4133412041-000 circular connector has a rated voltage of 250V and can operate b/w -40 to 85°C. With a total of 4 contacts, it is designed for applications requiring a max current of 4A. The connector features a brass shell with nickel finish, ideal for use in polarized connections at high temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HR10A-10P-12S(73)
HR10A-10P-12S(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC, insulation resistance of 1Gohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring durability up to 1000 cycles.
HR10A-10P-10P(73)
HR10A-10P-10P(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and nickel-plated shell. It features snap coupling type and solid backshell for secure connections. Ideal for cable mounting applications in various industries requiring reliable male plug connectors.
HR10A-13P-20S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR10A-10R-12P(74)
HR10A-10R-12P(74) by Hirose Electric is a circular connector with 12 contacts, gold contact finish, and snap coupling type. Ideal for panel mounting applications, it features a nickel-plated shell made of zinc alloy and brass. Termination is solder-based, suitable for male connectors in receptacle style shells.
HR10A-10TPA-12S(73)
HR10A-10TPA-12S(73) by Hirose Electric is a circular connector with 12 contacts, silver termination finish, and threaded coupling. It is commonly used in applications requiring a female contact gender, solder termination, and a plug body style.
HR10A-10R-12SB(71)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Mixed Contacts: NO; Empty Shell: NO;
HR10A-10J-10P(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Filter Feature: NO;
HR10-7P-4P(73)
HR10-7P-4P(73) by Hirose Electric is a circular connector with gold termination, rated for 2A signal current. With 4 contacts and durable zinc alloy body, it's ideal for commercial applications requiring reliable connections in temperatures ranging from -25 to 85°C. The snap coupling type and solder lug termination make it suitable for cable mounting with a solid backshell design.
HR10A-10P-12P(73)
HR10A-10P-12P(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC and insulation resistance of 1Gohm. With a shell made of zinc alloy and brass, it is ideal for commercial applications requiring durability and reliability in temperatures ranging from -25 to 85°C.
HR10-7P-4S(73)
HR10-7P-4S(73) by Hirose Electric is a circular connector with 4 gold-plated contacts, SNAP coupling type, and nickel-plated shell. Ideal for cable mounting applications in industries requiring reliable female connectors. Made of zinc alloy and brass with a solid backshell design, suitable for plug-style connections in size 7 shells.
HR10A-7P-6SC(73)
HR10A-7P-6SC(73) by Hirose Electric is a circular connector with 6 contacts, rated at 2A signal current. It features a nickel-plated shell, zinc alloy and brass construction, and crimp termination. With a durability of 1000 cycles, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -25°C to 85°C.
HR10-7P-6S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Backshell Type: SOLID;
HR10A-10P-12SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; Termination Contact Finish: NOT APPLICABLE;
HR10A-10P-12S(74)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HR10A-7R-6SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Backshell Type: SOLID; Additional Features: POLARIZED;
HR10A-7P-6P(73)
HR10A-7P-6P(73) by Hirose Electric is a circular connector with 6 contacts, gold termination finish, and 300VAC dielectric voltage. It is used in applications requiring a durable connector with polarization key, solder termination, and solid backshell for cable mounting. With a temperature range of -25 to 85°C, it offers reliable signal current up to 2A for commercial use.
HR10-10P-12S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: PLUG;
HR10A-10J-10SC(73)
HR10A-10J-10SC(73) by Hirose Electric is a SNAP circular connector with 10 contacts, nickel plated finish, and solid backshell. Ideal for cable mounting applications, it features zinc alloy & brass shell material, crimp termination type, and female contact gender.
HR10A-10P-10S
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; IEC Conformity: NO; Backshell Type: SOLID;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved