Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HR10A-10P-10P(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and nickel-plated shell. It features snap coupling type and solid backshell for secure connections. Ideal for cable mounting applications in various industries requiring reliable male plug connectors.
Median Price
$22.128
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Distrelec
1+ parts
$12.548
100+ parts
$10.783
1k+ parts
-
10k+ parts
Farnell
$16.450
$10.930
$10.070
Misumi USA
$17.480
Avnet
$19.332
$16.556
$15.625
Heilind Electronics
$19.680
$15.619
$15.375
Chip1Stop
$22.100
$14.900
$12.300
$10.900
RS (Exports)
$22.157
$18.981
Element14
$22.189
$20.917
$17.218
Interstate Connecting
$23.148
$18.116
Sager
$23.340
$20.000
$17.500
Newark
$24.960
$19.190
Mouser Electronics
$25.990
$20.010
Master Electronics
$26.920
$17.420
$16.090
DigiKey
$27.710
$20.020
$17.873
Verical
$14.724
Future Electronics
Nova Conductors
$14.443
Electro Sonic
$20.130
$14.700
$13.280
TME
$21.030
$15.560
Vyrian
ACDS - Activité Composants Distribution Service
NAC Semi
$32.510
IBS Electronics
$24.744
Semicontronic
$10.670
$10.403
$10.350
Ampacity Inc.
CoreStaff
$11.239
$7.425
$7.397
Netroflash
Allen Electronics Distributors
$16.750
$14.350
Continental Prestige Electronics
$17.060
$11.990
Authorized Procurement Solutions
Argo Parts USA
Abacus Technologies
Silver termination contact finish provides excellent conductivity and corrosion resistance, ensuring reliable and long-lasting connections.
Snap coupling type allows for quick and easy connections, making this circular connector user-friendly and convenient to use.
Nickel plated shell finish offers durability and protection against environmental factors, increasing the overall lifespan of the connector.
Circular connectors are known for their robustness and versatility, making them suitable for various applications in different industries.
Having 10 contacts allows for multiple connections within a single connector, increasing its usefulness in complex systems or applications.
Solid backshell provides additional protection and strain relief for the cable connection, ensuring stability and longevity of the overall assembly.
Cable mounting type simplifies installation and allows for secure attachment to the cable, providing a stable and reliable connection.
Zinc alloy and brass shell material combination offers a good balance between strength and conductivity, making the connector durable and efficient.
Solder termination type ensures secure and high-quality connections, reducing the risk of signal loss or interference in the transmission.
Male contact gender is commonly used for plugs in connectors, offering compatibility with female connectors and ensuring proper mating for reliable connections.
Plug body or shell style is commonly used for connectors that require insertion into a receptacle or socket, providing a secure and stable connection.
Shell size 10 indicates the physical dimensions of the connector, ensuring compatibility with corresponding receptacles or housings for proper fit and functionality.
Other Function Circular Connectors HR10A-10P-10P(73) attributes and parameters. Explore more Other Function Circular Connectors devices from Hirose Electric
Additional Features:
Backshell Type:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
HR10A-10P-10P(73) Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
T4111401051-000
TE Connectivity
TE Connectivity's T4111401051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarization key in plug shell style.
FGS.1M.308.XLMM
Lemo Usa
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
208130-1
TE Connectivity's 208130-1 is a threaded circular connector with polyethylene insulator, 4 contacts, and solid backshell. It is a male receptacle type connector with shell size 11, designed for panel mounting. Ideal for applications requiring secure and reliable electrical connections.
T4110002081-000
TE Connectivity's T4110002081-000 is a threaded circular connector with 8 contacts, rated for 2A at 30V. Made of polybutylene terephthalate, it operates b/w -40 to 85°C and can withstand up to 100 cycles. Ideal for applications requiring a durable, polarized female receptacle connector with round pin sockets in shell size 20.
T3261001
Amphenol
The Amphenol T3261001 circular connector features 3 contacts, rated at 5A signal current. With a dielectric voltage of 1500VAC and insulation resistance of 10^10 ohm, it is ideal for commercial applications requiring durability up to 500 cycles. The threaded coupling type and brass shell material ensure reliable performance in temperatures ranging from -40°C to 100°C.
SH-8EPC58AAD00S
Phoenix Contact
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1-1589061-3
TE Connectivity 1-1589061-3 is a SNAP circular connector with 19 contacts, suitable for panel mounting. It has a temperature range of -55 to 200°C and supports wire size up to 30 AWG. Ideal for applications requiring female contact gender and receptacle body style with nickel finish shell material.
967650-1
TE Connectivity's 967650-1 Circular Connector features a body size of 1.291" x 1.22" x 1.291", rated voltage of 48V, and operating temperature range from -40°C to 120°C. With a total of 7 contacts, it is ideal for applications requiring a threaded coupling type and glass-filled polybutylene terephthalate insulator material.
205840-4
TE Connectivity 205840-4 is a threaded circular connector with 28 contacts, rated at 250V and 7.5A. It features polyethylene insulator, UL flammability rating of 94V-0, and operating temperature range from -55 to +105°C. Ideal for panel mounting applications requiring a polarized male receptacle connector with solid backshell design.
CMC-0588-000-5D-CS2423
CIRCULAR CONNECTOR;
AHDM04-18-20SN
Other Circular Connectors;
192900-0303
Itt Cannon
The ITT Cannon 192900-0303 is a circular connector with bayonet coupling, polyamide insulator, and corrosion-resistant properties. With 12 contacts, waterproof option, and solid backshell, it's ideal for cable mounting applications requiring a male plug in shell size 14.
9901461007
Franz Binder &
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
YHDP26-18-14SECL20
TE Connectivity YHDP26-18-14SECL20 is a circular connector with 14 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting on cables.
206150-1
TE Connectivity 206150-1 is a threaded circular connector with 37 contacts, rated for 600V. Made of glass-filled polyamide66, it operates b/w -55 to 105°C. Ideal for applications requiring a polarized, UL-certified connector with crimp termination and solid backshell.
T4111002041-000
TE Connectivity's T4111002041-000 is a threaded circular connector with gold over nickel termination. Rated for 250V and 4A, it has 4 contacts and operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarized key in plug shell style.
T3300001U
T3300001U by Amphenol is a circular connector with 0.669" body diameter and 1.752" depth, featuring SNAP coupling type. Made of brass shell material, it has 4 contacts and operates b/w -40°C to 100°C. Ideal for cable mounting applications requiring solid backshell and solder termination.
HD36-18-14SN-059
TE Connectivity's HD36-18-14SN-059 is a circular connector with 14 contacts, rated at 250V and 13A. With aluminum alloy shell material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, female contact style plug with strain relief mounting on cables.
LF10WBJ-4S
Hirose Electric
LF10WBJ-4S by Hirose Electric is a circular connector with 4 contacts, gold termination finish, and threaded coupling. It is waterproof and features a zinc alloy shell, suitable for cable mounting applications. The connector has a jack body style and uses crimp termination for female contacts.
1551448
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HR10A-7P-6S(73)
HR10A-7P-6S(73) by Hirose Electric is a circular connector with 6 contacts, matte tin finish, and polyamide insulator. With a body diameter of 0.453 inch and shell size of 7, it is ideal for cable mounting applications. Featuring corrosion-resistant properties and a temperature range from -25 to 85°C, this connector is suitable for various industrial environments.
HR10A-10P-12S(73)
HR10A-10P-12S(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC, insulation resistance of 1Gohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring durability up to 1000 cycles.
HR10A-10P-10S(73)
HR10A-10P-10S(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and snap coupling type. It is used for cable mounting applications requiring a female plug with solid backshell and nickel-plated zinc alloy/brass shell material.
HR10A-13P-20S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR10A-10R-12P(74)
HR10A-10R-12P(74) by Hirose Electric is a circular connector with 12 contacts, gold contact finish, and snap coupling type. Ideal for panel mounting applications, it features a nickel-plated shell made of zinc alloy and brass. Termination is solder-based, suitable for male connectors in receptacle style shells.
HR10A-10TPA-12S(73)
HR10A-10TPA-12S(73) by Hirose Electric is a circular connector with 12 contacts, silver termination finish, and threaded coupling. It is commonly used in applications requiring a female contact gender, solder termination, and a plug body style.
HR10A-10R-12SB(71)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Backshell Type: SOLID; Mixed Contacts: NO; Empty Shell: NO;
HR10A-10J-10P(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; IEC Conformity: NO; Filter Feature: NO;
HR10-7P-4P(73)
HR10-7P-4P(73) by Hirose Electric is a circular connector with gold termination, rated for 2A signal current. With 4 contacts and durable zinc alloy body, it's ideal for commercial applications requiring reliable connections in temperatures ranging from -25 to 85°C. The snap coupling type and solder lug termination make it suitable for cable mounting with a solid backshell design.
HR10A-10P-12P(73)
HR10A-10P-12P(73) by Hirose Electric is a circular connector with 12 contacts, rated at 2A signal current. It features a dielectric voltage of 300VAC and insulation resistance of 1Gohm. With a shell made of zinc alloy and brass, it is ideal for commercial applications requiring durability and reliability in temperatures ranging from -25 to 85°C.
HR10-7P-4S(73)
HR10-7P-4S(73) by Hirose Electric is a circular connector with 4 gold-plated contacts, SNAP coupling type, and nickel-plated shell. Ideal for cable mounting applications in industries requiring reliable female connectors. Made of zinc alloy and brass with a solid backshell design, suitable for plug-style connections in size 7 shells.
HR10A-7P-6SC(73)
HR10A-7P-6SC(73) by Hirose Electric is a circular connector with 6 contacts, rated at 2A signal current. It features a nickel-plated shell, zinc alloy and brass construction, and crimp termination. With a durability of 1000 cycles, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -25°C to 85°C.
HR10-7P-6S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; MIL Conformity: NO; Backshell Type: SOLID;
HR10A-10P-12SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 300VAC; Termination Contact Finish: NOT APPLICABLE;
HR10A-10P-12S(74)
CIRCULAR CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
HR10A-7R-6SC(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Backshell Type: SOLID; Additional Features: POLARIZED;
HR10A-7P-6P(73)
HR10A-7P-6P(73) by Hirose Electric is a circular connector with 6 contacts, gold termination finish, and 300VAC dielectric voltage. It is used in applications requiring a durable connector with polarization key, solder termination, and solid backshell for cable mounting. With a temperature range of -25 to 85°C, it offers reliable signal current up to 2A for commercial use.
HR10-10P-12S(73)
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: PLUG;
HR10A-10J-10SC(73)
HR10A-10J-10SC(73) by Hirose Electric is a SNAP circular connector with 10 contacts, nickel plated finish, and solid backshell. Ideal for cable mounting applications, it features zinc alloy & brass shell material, crimp termination type, and female contact gender.
HR10A-10P-10S
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; IEC Conformity: NO; Backshell Type: SOLID;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved