Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.744
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$0.145
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.170
$0.807
Rochester
$0.730
$0.606
$0.540
DigiKey
$0.910
Verical
$0.757
$0.675
Chip1Stop
$0.272
Digiode
$0.170
Nova Conductors
$0.523
Vyrian
TME
$0.650
$0.587
Prism Electronics
Classic Components Corporation
ECAB
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
DigiKey Marketplace
Q Components
Corphita
$0.161
Continental Prestige Electronics
$0.512
Argo Parts USA
$0.507
Netroflash
$0.497
$0.486
Parana Technologies
$24.804
$25.477
DigiPath Technology Company
$27.313
$25.128
ChromeModa Solutions
$27.870
$22.853
IDEA Electronic Components Group
$26.476
$25.083
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Glotronic Ltd.
Supply Digital
Infinite Electronics LLP (Excess)
GreenTree Electronics
Assy Fe
Latches & Flip-Flops CD74AC112M attributes and parameters. Explore more Latches & Flip-Flops devices from Harris Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Minimum fmax:
CD74AC112M Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Secos
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Components
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
74LVC1G175GV-Q100,125
Nexperia
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
SN74HCT273NSR
SN74HCT273NSR by Texas Instruments is an 8-bit latch with a 5V supply voltage, 42ns propagation delay, and 20 terminals. It is used in industrial applications requiring positive edge triggering and operates at frequencies up to 20MHz. The small outline package makes it suitable for compact designs.
CD40174BE
Intersil
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LVC1G175DCKT
SN74LVC1G175DCKT by Texas Instruments is a latch with 5.7ns propagation delay, 3.3V power supply, and 150MHz max frequency. Ideal for automotive applications due to its small size and low power consumption.
MM74HC74AMX
MM74HC74AMX by Onsemi is a dual-function latch with 14 terminals, operating at supply voltages of 2-6V. It features a propagation delay of 140ns, output polarity is complementary, and max frequency at nominal supply is 24MHz. Ideal for industrial applications requiring positive edge triggering in compact designs.
CD74HC173E
Rca Solid State
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74F175D
SN74F175D by Texas Instruments is a TTL technology latch with 4 functions, 9.5 ns propagation delay at 5V supply, and 50 pF load capacitance. It is used in applications requiring positive edge triggering, such as digital circuits for data storage and transfer. The small outline package with gull wing terminals makes it suitable for surface mount assembly in commercial-grade temperature environments.
SN74HC175PWRE4
SN74HC175PWRE4 by Texas Instruments is a 4-bit latch with a 5V supply voltage, 50 pF load capacitance, and 190 ns propagation delay. It is used in industrial applications for positive edge triggering, with a max frequency of 25 MHz at nominal voltage.
CD4044BDR
CD4044BDR by Texas Instruments is a 4-bit latch with 140ns propagation delay, operating at 5V. It features a small outline package and can handle load capacitance of 50pF. Ideal for military-grade applications requiring low-level trigger type and true output polarity.
MM74HC74AMX_NL
Fairchild Semiconductor
Fairchild Semiconductor's MM74HC74AMX_NL is a dual-function latch with 14 terminals, operating voltage of 2-6V, and propagation delay of 140ns. It is used in industrial applications for positive edge triggering at frequencies up to 24MHz. Package style is small outline with surface mount capability.
SN74LV273ADBRE4
SN74LV273ADBRE4 by Texas Instruments is an 8-bit latch with a propagation delay of 21 ns at 3.3V, suitable for automotive applications. It operates on a supply voltage range of 2-5.5V, has a max frequency of 45 MHz, and features positive edge triggering for efficient data storage in electronic systems.
CD74HCT574M
Thomson Consumer Electronics
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
SN74LS107AN
Motorola
J-K FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LS76AN
SN74LS76AN by Texas Instruments is a TTL latches & flip-flops IC with 2 functions, 2 bits, and 16 terminals. It operates at a supply voltage of 5V with a propagation delay of 20ns. Ideal for applications requiring negative edge triggering and complementary output polarity in commercial temperature grades.
MC14599BCP
D LATCH; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LVC74APW
SN74LVC74APW by Texas Instruments is a dual-function latch with 5.2ns propagation delay, ideal for automotive applications. Operating b/w -40 to 125°C, it supports a max frequency of 150MHz at a supply voltage range of 1.65V to 3.6V, making it suitable for high-speed and low-power designs.
CD4013BM96E4
CD4013BM96E4 by Texas Instruments is a CMOS latches & flip-flops IC with 2 functions, 300 ns propagation delay at 5V. It has a small outline package and operates b/w -55 to 125 °C. Ideal for military-grade applications requiring positive edge triggering and complementary output polarity.
74AUP1G74DC,125
NXP Semiconductors
The NXP Semiconductors 74AUP1G74DC,125 is a latch & flip-flop with 1 function and a supply voltage of 1.2V. It has a small outline package style and is suitable for automotive applications.
CD4044BE
R-S LATCH; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74ACT273PWRG4
CD74ACT273PWRG4 by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 13.5 ns at 5V, suitable for military-grade applications. It features a max frequency of 85 MHz, operates within a temperature range of -55 to 125°C, and has a compact small outline package style for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CD74HC573M96
D LATCH; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
D LATCH; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC73M96
Harris Semiconductor
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC73M96 by Texas Instruments is a dual-function latch with 40ns propagation delay, suitable for military-grade applications. It operates at a supply voltage range of 2-6V and has a max frequency of 20MHz. With surface mount capability and small outline package style, it offers versatile integration in electronic circuits.
CD74AC273M96
CD74AC273M96 by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 18.9 ns at 3.3V, suitable for military-grade applications. It operates on a supply voltage range of 1.5V to 5.5V, has a max frequency of 71MHz, and features positive edge triggering for reliable performance in various electronic systems.
CD74ACT175M
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Ge Solid State
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; No. of Bits: 4;
Rochester Electronics
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
General Electric Solid State
CD74HC74MT
CD74HC74MT by Texas Instruments is a dual-function latches & flip-flops IC with 53ns propagation delay. It operates at 4.5V, has 14 terminals, and supports surface mount technology. Ideal for applications requiring positive edge triggering and complementary output polarity in military-grade environments up to 125°C.
CD74HC573E
D LATCH; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved