Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: WDIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: 0 Cel;
Median Price
$2.270
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$2.030
10k+ parts
$1.910
Digiode
$2.394
Vyrian
Anansix
Electronic Expediters
LWI Electronics Inc
ComSIT Distribution GmbH
R&J Components
Resion
Inland Empire Components Inc.
Corphita
$2.268
Microchip USA
$15.730
Supply Digital
Cyclops Electronics Ltd (Excess)
EPROM NM27C010Q90 attributes and parameters. Explore more EPROM devices from Fairchild Semiconductor
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NM27C010Q90 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Kingwell Technonlogy
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Daco Semiconductor
Nte Electronics
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
TMM2732D
Toshiba
Toshiba TMM2732D is a 4KX8 EPROM with 32768-bit memory density and 350 ns access time. It operates at a nominal 5V supply voltage, featuring a 3-STATE output for common I/O applications. The MOS technology chip has a temperature range of 0-70°C, making it suitable for commercial-grade electronic systems.
TMS27C32-120JE
Texas Instruments
TMS27C32-120JE by Texas Instruments is a 4KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output characteristics, and INDUSTRIAL temperature grade. Commonly used in parallel applications due to its 24 terminals and through-hole terminal form.
TMS27C512JL4
TMS27C512JL4 by Texas Instruments is a 64KX8 EPROM with 3-STATE output, operating at 5V. It features an access time of 250ns and memory density of 524288 bits. Ideal for applications requiring non-volatile memory storage in commercial temperature environments.
EPC2LC20
Altera
CONFIGURATION MEMORY; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Maximum Seated Height: 4.572 mm;
SMJ27C256-30JM
SMJ27C256-30JM by Texas Instruments is a 32KX8 EPROM with 3-STATE output, operating at -55 to 125 °C. It has a supply voltage of 4.5-5.5V and max access time of 300ns. Ideal for military-grade applications requiring reliable non-volatile memory storage in harsh environments.
M27C1001-45XF1
STMicroelectronics
M27C1001-45XF1 by STMicroelectronics is a 128KX8 EPROM with 45 ns access time, operating at 5V. It features a CMOS technology, through-hole terminal form, and 3-STATE output characteristics. Ideal for applications requiring fast memory access in commercial temperature environments.
5962-8606303XX
Texas Instruments' 5962-8606303XX EPROM features 32KX8 organization, 5V supply voltage, and -55 to 125°C operating temperature. Ideal for military applications requiring a UVPROM memory IC with 32768 words and 300ns access time in a ceramic package.
TMS27C512-120JL4
TMS27C512-120JL4 by Texas Instruments is a 64KX8 EPROM with 120 ns access time, 5V supply voltage, and CMOS technology. It has 28 terminals in an IN-LINE package shape for common asynchronous operation. Ideal for commercial applications requiring fast memory access and low standby current consumption.
TMS27C512-150JE
TMS27C512-150JE EPROM by Texas Instruments features 64KX8 organization, 150 ns access time, and 524288 bit memory density. Ideal for industrial applications requiring reliable non-volatile memory with a parallel interface.
M27C1001-15XL3XTR
STMicroelectronics' M27C1001-15XL3XTR is a 128Kx8 EPROM chip with 120ns access time, 32 terminals, and 1048576-bit memory density. It operates at -40 to 125 °C, suitable for automotive applications requiring common I/O type and 5V supply voltage.
M27C1001-15XL6TR
M27C1001-15XL6TR by STMicroelectronics is an EPROM with 128KX8 organization, 120 ns access time, and 3-STATE output characteristics. It operates in asynchronous mode at a temperature range of -40 to 85 °C and is commonly used in industrial applications requiring reliable non-volatile memory storage.
EPC2TI32
Intel
EPC2TI32 by Intel is a 32-terminal EPROM with synchronous operation and 3-STATE output. It operates at temperatures ranging from -40 to 85°C, suitable for industrial applications. With a memory density of 1695680 bits, it is ideal for configuration memory needs in various electronic devices.
SMJ2532-45JDM
The Texas Instruments SMJ2532-45JDM is a 4KX8 EPROM with 24 terminals, operating b/w -55 to 125°C. Featuring 3-STATE output, it offers a memory density of 32768 bit and max access time of 450 ns. Ideal for military-grade applications requiring reliable non-volatile memory solutions.
M27C1001-15XF6
M27C1001-15XF6 by STMicroelectronics is a 128KX8 EPROM with 150ns access time, operating at 5V. It features a CMOS technology, 32 terminals in an IN-LINE package style. Ideal for industrial applications requiring reliable non-volatile memory storage.
NMC27C64Q250
National Semiconductor
NMC27C64Q250 by National Semiconductor is an EPROM with 8KX8 organization, 8192 words, and 65536 bit memory density. It operates in asynchronous mode with a programming voltage of 13V. Commonly used for memory storage applications due to its 3-STATE output characteristics and parallel terminal form.
TMS27C32-120JE4
TMS27C32-120JE4 by Texas Instruments is a 4KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and INDUSTRIAL temperature grade. Commonly used in parallel applications for memory storage due to its 32768 bit density and UVPROM type.
5962-87515023C
5962-87515023C by STMicroelectronics is a military-grade EPROM with a 5V supply, featuring an asynchronous operation mode and a max access time of 55 ns. It has a memory density of 65536 bits organized as 8Kx8. Ideal for high-reliability applications in harsh environments.
M27C1001-15F3
STMicroelectronics' M27C1001-15F3 EPROM features 128KX8 organization, 150 ns access time, and 1048576 bit memory density. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125 °C with a supply voltage of 4.5-5.5 V.
5962-01-357-9827
Texas Instruments' 5962-01-357-9827 EPROM features 32KX8 organization, 3-STATE output, and 262144-bit memory density. Ideal for industrial applications with a temperature range of -40 to 85 °C, this CMOS technology chip has a programming voltage of 13V and operates at a max access time of 250 ns.
TMS27C64-12JL
TMS27C64-12JL by Texas Instruments is an 8KX8 EPROM with 70°C max temp, 120 ns access time, and 5.5V max supply voltage. Commonly used in commercial applications for memory storage due to its 65536 bit density and parallel interface.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved