Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 650 MHz; Terminal Form: THROUGH-HOLE; Package Shape: ROUND;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Supply Digital
Corphita
RF Small Signal Bipolar Junction Transistors (BJT) KST10D74Z attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Fairchild Semiconductor
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
KST10D74Z Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
EU2B-YS303C
Idec
ROTARY SWITCH;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LL4148-GS08
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Continental Device India
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Tak Cheong Electronics Holdings
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
MPSH81RLRE
Onsemi
MPSH81RLRE by Onsemi is a PNP RF BJT transistor with 3 terminals in a cylindrical package. It operates at a max temp of 150 °C, has a max Vce of 20V, and fT of 600MHz. Ideal for amplifier applications due to its high transition frequency and low collector-base capacitance.
BFG540/X,215
NXP Semiconductors
NXP Semiconductors' BFG540/X,215 is a NPN RF BJT with 4 terminals in a small outline package. It operates in L Band with fT of 9000 MHz and can handle 0.12 A collector current. Ideal for amplifier applications, it has a max power dissipation of 0.5 W at 150°C ambient temperature.
2N3137
STMicroelectronics
2N3137 by STMicroelectronics is an NPN RF BJT designed for amplifier applications. It features a max power dissipation of 2W, operates up to 175 °C, and has a nominal transition frequency of 750 MHz. Ideal for very high-frequency circuits, it ensures reliable performance.
MMBTH17LT1
MMBTH17LT1 by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 15V and fT of 800MHz. It is designed for ultra-high frequency band applications like amplifiers, featuring a small outline package with gull wing terminals. The transistor's silicon element material ensures high performance in RF signal amplification.
BFR92
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
BF494
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 260 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .03 A;
TIS125
Texas Instruments
TIS125 by Texas Instruments is a NPN BJT transistor with max. power dissipation of 0.25W, hFE of 30, and fT of 450MHz. It is used in RF applications due to its very high frequency band capability, operating at up to 150°C with a VCE max of 30V.
NE85633-T1B-A
Renesas Electronics
NE85633-T1B-A by Renesas Electronics is a NPN BJT transistor for RF applications. It operates in the ultra high frequency band with a transition frequency of 7000 MHz. This single configuration transistor has a max collector-emitter voltage of 12V and is suitable for amplifier circuits in small outline packages.
NSVF4009SG4T1G
NSVF4009SG4T1G by Onsemi is a NPN RF BJT transistor with 4 terminals, suitable for amplifier applications in L Band. It has a max power dissipation of 0.12W, hFE of 50, and operates b/w -55 to 150 °C. Ideal for surface mount designs with a small outline package style.
MPS6507ZL1
MPS6507ZL1 by Onsemi is an NPN BJT transistor with a max collector-emitter voltage of 20V and a nominal transition frequency of 800MHz. It is commonly used as an amplifier in RF applications due to its low collector-base capacitance of 2.5pF, making it suitable for high-frequency operations.
LM3046M
LM3046M by Texas Instruments is an NPN BJT with 5 elements and 14 terminals. It operates in the very high frequency band at 550 MHz, ideal for amplifier applications. With a max collector-emitter voltage of 15V and max collector current of 0.05A, it's suitable for small outline packages in RF circuits.
MPSH10RLRP
MPSH10RLRP by Onsemi is an NPN RF BJT with a max. collector-emitter voltage of 25V and fT of 650MHz. Ideal for amplifier applications, it has a max. power dissipation of 0.35W and operates in the ultra-high frequency band.
NTE311
Nte Electronics
NTE311 by Nte Electronics is an NPN RF BJT transistor with 3 terminals, ideal for amplifier applications in the ultra-high frequency band. It has a max power dissipation of 5W, fT of 800MHz, and hFE of 25, making it suitable for high-frequency signal amplification. The package style is cylindrical with a metal body and wire terminals.
BFU590QX
BFU590QX by NXP Semiconductors is a RF Small Signal BJT with NPN polarity, suitable for amplifier applications. It has a max fT of 8000 MHz, Vce of 12V, and Ic of 0.2A. This transistor comes in a small outline package with flat terminals and is surface mountable.
START405TR
START405TR by STMicroelectronics is an NPN RF BJT designed for amplifier applications. It features a max power dissipation of 0.045 W, operates up to 150 °C, and supports frequencies in the C band with a transition frequency of 42 GHz. Its compact surface mount design ensures efficient performance in various electronic devices.
2SC4915-O,LF
Toshiba
2SC4915-O,LF by Toshiba is an NPN RF BJT transistor with a single configuration for amplifier applications. It offers a min power gain of 17 dB and operates in the very high frequency band up to 550 MHz. With a max collector-emitter voltage of 30V and dual terminal position, it is suitable for small outline surface mount designs.
MMBTH10LT3
MMBTH10LT3 by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 25V and fT of 650MHz. Ideal for UHF applications, it comes in a small outline package with Gull Wing terminals, making it suitable for high-frequency circuit designs.
MPSH10RL
MPSH10RL by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 25V and fT of 650MHz. It is used in ultra-high frequency applications due to its low capacitance (0.7pF) and high transition frequency. The transistor's cylindrical package with through-hole terminals makes it suitable for various RF small signal circuits.
3003
Microsemi
Microsemi's 3003 is an NPN BJT transistor for RF amplification in S Band applications. With a max operating temp of 200°C, it has a 0.6A collector current and comes in a ceramic-metal package with flat terminals for surface mount assembly.
HFA3101BZ
HFA3101BZ by Renesas Electronics is an NPN RF BJT transistor with a max fT of 10GHz. It is used as an amplifier in the ultra-high frequency band, featuring a max operating temp of 150°C and max collector-emitter voltage of 8V. This complex-configured transistor has 6 elements, 8 terminals, and comes in a small outline package with gull wing terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Fairchild Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved