Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIODE BUS TERMINATION ARRAY; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Cyclops Electronics Ltd
VNN
Digiode
Vyrian
Nova Conductors
AZTECH Wire
$8.724
Ampacity Inc.
$28.500
A-Z Elektronik GmbH
Continental Prestige Electronics
Authorized Procurement Solutions
Metaverse IC Inc.
Assy Fe
Argo Parts USA
Supply Digital
Corphita
Bastille Electronics
Data Bus Terminators 74F1071MTCX attributes and parameters. Explore more Data Bus Terminators devices from Fairchild Semiconductor
Additional Features:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Signal Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
74F1071MTCX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LL4148-GS08
Vishay Telefunken
SPC TECHNOLOGY/ MULTICOMP
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Weitronic Enterprise
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
UCC5606PWPTR
UCC5606PWPTR by Texas Instruments is a SCSI bus terminator with 24 terminals, operating at 3.3V and supporting up to 5.25V supply voltage. It features BICMOS technology, GULL WING terminal form, and 110 ohm pull-up resistance. Ideal for data bus termination applications in commercial-grade environments with a temperature range of 0-70°C.
UCC5614PWPTRG4
UCC5614PWPTRG4 by Texas Instruments is a SCSI bus terminator with 24 terminals, operating at 3.3V nominal voltage and BICMOS technology. It features a max supply voltage of 5.25V, dual terminal position, and small outline thin profile package style. Ideal for commercial applications requiring data bus termination in compact spaces with temperature range from 0 to 70°C.
74F1071MTCX
DS21T07S/T&R
Maxim Integrated
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74S1053DWRG4
SN74S1053DWRG4 by Texas Instruments is a 20-terminal data bus terminator with nickel palladium gold finish. It operates b/w 0-70°C, suitable for commercial applications. With 16 signal lines and 5V supply voltage, it serves as a diode bus termination array in surface-mount packages.
SN74ACT1073NSRG4
SN74ACT1073NSRG4 by Texas Instruments is a CMOS technology-based diode bus termination array with 16 signal lines. It operates b/w -40 to 85°C, with a supply voltage range of 4.5V to 5.5V. This small outline package is ideal for industrial applications requiring data bus terminators in surface-mount configurations.
UCC5647FQP
UCC5647FQP by Texas Instruments is a 64-terminal data bus terminator with a supply voltage range of 2.7V to 5.25V. It features a low profile flatpack package style, operates in temperatures from 0°C to 70°C, and offers differential output for SCSI bus termination applications.
UCC5672PWPTRG4
UCC5672PWPTRG4 by Texas Instruments is a SCSI bus terminator with 28 terminals, operating at 3.3V nominal voltage and 35mA supply current. It features a BICMOS technology, differential output, and 105 ohm pull-up resistance. This device is designed for data bus termination applications in commercial-grade environments with a temperature range of 0-70°C.
UCC5618DWPTRG4
UCC5618DWPTRG4 by Texas Instruments is a Data Bus Terminator with 18 signal lines, BICMOS technology, and 110 ohm pull-up resistance. It is designed for SCSI interface applications, operates b/w 0-70°C, and has a supply voltage range of 4-5.25V.
DS21T09S
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
UCC5687PMTR
UCC5687PMTR by Texas Instruments is a Data Bus Terminator with 64 terminals, operating at 2.7-5.25 V. It features a BICMOS technology, GULL WING terminal form, and SCSI BUS TERMINATOR interface IC type. This component is ideal for applications requiring differential output and a nominal pull-up resistance of 105 ohm in commercial temperature grades.
DS2113S
Bus Terminators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
935266801112
NXP Semiconductors
OTHER TERMINATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR;
UCC5673PWP
UCC5673PWP by Texas Instruments is a SCSI bus terminator with 28 terminals, operating at 2.7-5.25V. It features a small outline package style, nickel palladium gold finish, and dual terminal position. Ideal for data bus termination applications in commercial-grade environments with a temperature range of 0-70°C.
DS21T06S
Bus Terminators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
74F1071MSA
National Semiconductor
74F1071MSA by National Semiconductor is a Data Bus Terminator with 20 terminals in a small outline package. It features Gull Wing terminal form, Tin/Lead finish, and 0.65mm pitch. Ideal for diode bus termination arrays in electronic applications.
UCC5628FQP
UCC5628FQP by Texas Instruments is a Data Bus Terminator with 48 terminals, operating voltage range of 2.7V to 5.25V, and BICMOS technology. It features differential output for SCSI bus termination applications, with a compact square package style suitable for surface mount assembly at temperatures up to 70°C.
UCC5639FQPTR
UCC5639FQPTR by Texas Instruments is a Data Bus Terminator with 48 terminals, operating at 3.3V. It features a max supply voltage of 5.25V and supports differential output. Ideal for SCSI bus termination applications due to its low profile flatpack design and commercial temperature grade suitability up to 70°C.
UCC5631AMWPTR
UCC5631AMWPTR by Texas Instruments is a SCSI bus terminator with 36 terminals and a supply voltage range of 2.7V to 5.25V. It features BICMOS technology, differential output, and a nominal pull-up resistance of 105 ohm. This device is ideal for data bus termination applications requiring commercial-grade temperature tolerance up to 70°C.
LP2998MRX/NOPB
OTHER TERMINATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74F1071SC
DIODE BUS TERMINATION ARRAY; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20;
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
DIODE BUS TERMINATION ARRAY; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
74F1071MSAX
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
74F1071MTC
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20;
DIODE BUS TERMINATION ARRAY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74F1071SCX
74F1071SCX by National Semiconductor is a data bus terminator with a small outline package style. It has 20 terminals in a rectangular shape, with a max seated height of 2.65 mm and dimensions of 7.5 mm width and 12.8 mm length. This interface IC type is used as a diode bus termination array.
74F1071SC_NL
74F1071MTCX_NL
74F1071SCX_NL
74F1071MSAX_NL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved