Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-0603S500-2 fuse, rated 5A with 35V AC & 32V DC, offers slow blow characteristic and 0.622J nominal joule integral. Ideal for electric circuit protection in various applications due to UL/CUL standards compliance and surface mounting feature.
Median Price
$0.374
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.560
100+ parts
$0.375
1k+ parts
$0.294
10k+ parts
$0.250
DigiKey
$0.680
$0.395
$0.302
-
Arrow
$0.216
Verical
Master Electronics
$0.306
$0.284
Newark
$0.599
$0.467
$0.436
Chip1Stop
$0.208
TTI
Farnell
$0.292
$0.254
Element14
$0.546
$0.519
$0.492
TME
$0.427
NAC Semi
$0.445
Electro Sonic
$0.335
$0.330
IBS Electronics
$0.411
$0.343
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Nova Conductors
Ampacity Inc.
$0.177
Continental Prestige Electronics
$0.331
$0.312
$0.283
Argo Parts USA
Aranea Global
Higher joule rating ensures better protection against power surges and fluctuations.
Suitable for use in applications with AC voltage up to 35 volts.
Provides a delay of 5 seconds before tripping, allowing for temporary surges to pass without triggering the fuse.
Compact size makes it suitable for use in small electronic devices.
Can handle a current up to 5 amps, suitable for a variety of electronic devices.
Can operate at high temperatures without compromising performance.
Slow-blow characteristic ensures that the fuse can handle temporary surges without blowing prematurely.
Can be easily mounted on the surface of circuit boards for convenient installation.
Meets the safety and performance standards set by CUL and UL, ensuring reliability and quality.
Fuses SF-0603S500-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-0603S500-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
NXP Semiconductors
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
0297003.WXNV
Littelfuse
Littelfuse 0297003.WXNV is a MINI fuse with 3A current rating, 32V DC voltage, and 20J nominal joule integral. It has a 0.03s trip time and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and UL reference standard compliance.
KTK-R-5
Eaton Corporation
Eaton Corporation's KTK-R-5 fuse, rated at 5A and 600V, features fast blow characteristic with a breaking capacity of 200kA. With CC class and nickel terminal finish, it is ideal for electric fuse circuit protection in various applications requiring inline mounting method. Measuring 10.3mm x 38.1mm, it complies with CE, CSA, and UL standards for reliable performance.
S218194
Mersen S A
Mersen S A's S218194 fuse has 10A rated current, 500V AC voltage, and 120000A breaking capacity. With a body length of 10.2mm and height of 38mm, it is used for electric circuit protection in inline/holder mounting applications at up to 250V DC.
ATDR1-4/10
ATDR1-4/10 by Mersen S A is a 1.4A time delay electric fuse with 600V AC and 300V DC ratings. It features an end cap terminal shape, inline mounting, and a compact size of 10.4mm x 38.1mm. Ideal for circuit protection in various applications meeting CSA and UL standards.
LP-CC-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: .5 A; Terminal Shape: END CAP;
BK/MDL-1-R
BK/MDL-1-R by Cooper Electronic Technologies is a 1A electric fuse with 250V AC voltage rating and 11.498J nominal joule integral. Featuring time delay blow characteristic, it has a rated breaking capacity of 35A. Ideal for inline mounting, this fuse is commonly used in circuit protection applications.
AJT600EI
Mersen S A's AJT600EI fuse, rated at 600V AC/500V DC and 600A, features a time delay blow characteristic. With a breaking capacity of 200kA, it is ideal for electric circuit protection in various applications. The fuse has TAB/BLADE terminals, measures 91.8mm in height, and includes an inline/holder mounting feature with an indicator as per UL standards.
LP-CC-2-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.5 A; Terminal Shape: END CAP;
LP-CC-1
Eaton Corporation LP-CC-1 fuse, rated 1A and 600V AC/300V DC, with time delay blow characteristic. Inline/holder mounting feature for circuit protection in CE/CSA/UL standard applications. Compact design at 10x38.1mm dimensions makes it suitable for various electrical systems.
50NHG000B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 250 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE;
NON-40
Eaton Corporation's NON-40 fuse, rated at 40A and 250V AC/125V DC, with a breaking capacity of 50kA. It is a K5 class electric fuse in a 20.57mm x 76.19mm body, suitable for inline mounting applications. Compliant with CE and UL standards, it offers reliable circuit protection in various electrical systems.
0697-0100-01
Bel Fuse
Bel Fuse 0697-0100-01 is a MICRO fuse with 0.1A rated current and 250V AC voltage. With dimensions of 8.35mm x 4mm x 7.7mm, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature and matte tin terminal finish.
ATDR10
The Mersen S A ATDR10 fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline mounting feature. Ideal for circuit protection in various applications requiring a high breaking capacity of 200kA.
J-41
Fuses;
LPJ-70SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
C1Q3
Bel Fuse C1Q3 is a 1206-sized fuse with rated voltage of 125V and current of 3A. It has a very fast blow characteristic, suitable for circuit protection in applications requiring surface mount fuses. The fuse has a rated breaking capacity of 100A and operates b/w -55°C to 125°C temperatures.
ATDR25
The Mersen S A ATDR25 fuse is a 25A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200000A.
SP/LPJ-400SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
0218.500HXP
Littelfuse 0218.500HXP fuse, rated at 0.5A and 250V, features a time lag blow characteristic with a trip delay of 0.02s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C and a rated breaking capacity of 35A.
KTK-R-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
SF-0603SP600-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603S063-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
SF-0603S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
SF-0603FP150F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
SF-0603FP020F-2
Bourns SF-0603FP020F-2 fuse, rated 0.2A, 35V AC/65V DC, with fast blow characteristic and 0.00142J joule integral. Ideal for circuit protection in electronics applications due to UL standard compliance and compact 1.6mm x 0.81mm x 0.3mm size for surface mounting method.
SF-0603FP025F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: .25 A; Terminal Shape: WRAPAROUND;
SF-0603FP050M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
SF-0603S400-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
SF-0603SP100-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F100-2
Bourns SF-0603F100-2 fuse, 1A rated current, 32V DC voltage, 0.084 ohm resistance. Fast blow characteristic for electric circuit protection in surface mount applications. Dimensions: 1.6mm x 0.8mm x 0.45mm with UL reference standard compliance.
SF-0603F315-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .089 J;
SF-0603FP160-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
SF-0603S200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
SF-0603S250-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
SF-0603S500M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 35 A;
SF-0603SA800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-0603SP250-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 105 Cel;
SF-0603SP080-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .8 A; Terminal Shape: WRAPAROUND; Blow Characteristic: TIME LAG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved