Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-0603S250-2 fuse, rated 2.5A with 35V AC and 32V DC, features slow blow characteristic and trip time of 5 sec. Ideal for electric circuit protection in applications requiring surface mount fuses with dimensions of 1.6mm x 0.8mm x 0.45mm.
Median Price
$0.407
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.730
100+ parts
$0.400
1k+ parts
$0.306
10k+ parts
$0.252
Newark
$0.740
-
Master Electronics
$0.284
Verical
$0.420
$0.347
Farnell
$0.394
$0.325
Element14
$0.632
$0.548
$0.518
Arrow
$0.298
$0.294
DigiKey
$0.326
Electro Sonic
$0.260
$0.224
IBS Electronics
$0.432
$0.386
TME
$0.303
Velocity Electronics
Nova Conductors
Ampacity Inc.
$0.196
Advanced Electronics
$14.411
$13.114
$11.817
Perfect Parts
Abacus Technologies
Argo Parts USA
RC Electronics
$0.490
$0.470
$0.460
Authorized Procurement Solutions
Continental Prestige Electronics
$0.274
$0.265
$0.251
Aranea Global
This fuse has a high energy absorption capacity, providing excellent protection against power surges and overloads.
The fuse is suitable for use in circuits with up to 35 volts AC, making it versatile and adaptable to various applications.
The 5-second trip time allows the fuse to quickly respond to overcurrent conditions, effectively cutting off power to prevent damage to the circuit.
The compact size of the fuse makes it ideal for space-constrained applications where size is a crucial factor.
With a rated current of 2.5 A, this fuse can safely handle moderate levels of current, providing reliable protection for the circuit.
The fuse can operate effectively at high temperatures up to 105°C, making it suitable for use in demanding environments.
The slow blow characteristic ensures that the fuse can withstand short-term overcurrent conditions, reducing the risk of false tripping.
The surface mount design of the fuse makes it easy to install and replace in modern circuit boards, saving time and effort during maintenance.
Fuses SF-0603S250-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-0603S250-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Packaging - Mult Devs Label Change 17/Oct/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
Fairchild Semiconductor
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Zetex Plc
1N4148WT
Diotec Semiconductor Ag
1554216002
Molex
WIRE AND CABLE;
ATDR1/4
Mersen S A
Mersen S A's ATDR1/4 fuse, rated 0.25A and 600V AC, features time delay blow characteristic. With a body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA such as inline mounting systems compliant with CSA and UL standards.
FNQ-R-3/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .75 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ANN-500
Eaton Corporation
Eaton Corporation's ANN-500 fuse is a 500A electric fuse with very fast blow characteristic. It has a rated AC voltage of 125V and rated breaking capacity of 2500A. Ideal for surface mount applications, it features built-in indicator and meets CSA and UL standards.
KTK-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 15 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
FNQ-R-1-1/8
Eaton Corporation's FNQ-R-1-1/8 fuse, rated at 1.125A and 600V, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation. Compliant with CE, CSA, and UL standards, this CC-class fuse has a high breaking capacity of 200000A.
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
S218194
Mersen S A's S218194 fuse has 10A rated current, 500V AC voltage, and 120000A breaking capacity. With a body length of 10.2mm and height of 38mm, it is used for electric circuit protection in inline/holder mounting applications at up to 250V DC.
AGU-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated Current: 40 A; Terminal Shape: END CAP; Packing Method: BOX;
LP-CC-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 30 A; Terminal Shape: END CAP;
0251001.NRT1L
Littelfuse
Littelfuse 0251001.NRT1L PICO fuse, rated at 125V/1A with 0.004s trip time. Very fast blow characteristic, suitable for electric circuit protection. Dimensions of 2.8mm x 7.11mm make it ideal for through-hole mounting in various applications.
0685T3000-01
Bel Fuse
Bel Fuse 0685T3000-01 is a 1206 size fuse with 3A rated current and 63V DC voltage. It offers slow blow characteristic, trip time of 0.002s, and nominal joule integral of 1.64J. Ideal for circuit protection in automotive applications meeting AEC-Q200, TUV, and UL standards.
0218.160MXP
0218.160MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.16A rated current and 250V rated voltage, suitable for circuit protection in various applications. It features a time lag blow characteristic, 0.144J nominal joule integral, and trip time of 0.02s, ensuring reliable performance at temperatures ranging from -55°C to 125°C. This fuse has a nickel terminal finish and meets standards such as CCC, CE, CSA, UL, and VDE.
FRN-R-6-1/4
Eaton Corporation's FRN-R-6-1/4 fuse, rated 6.25A at 250V AC/125V DC, features RK5 class with time delay blow characteristic. It has a compact body size of 14.22mm x 50.8mm and high breaking capacity of 200kA, suitable for electric circuit protection in various applications.
KTK-12
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
0157002.DRT
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
0251001.MRT1L
Littelfuse 0251001.MRT1L PICO fuse, rated 1A at 125V, offers very fast blow characteristic in a compact size of 2.8mm x 7.11mm. Ideal for supplemental circuit protection in applications requiring quick response to overcurrent events with a trip time of 0.004s. Suitable for use in various industries due to its high breaking capacity and wide operating temperature range from -55°C to 125°C.
FRN-R-35
Eaton Corporation's FRN-R-35 fuse, with 250V AC/125V DC voltage rating and 35A current, features RK5 class and time delay blow characteristic. Ideal for circuit protection in various applications, it comes in a compact size of 20.6mm x 76.2mm with end cap terminal shape for easy mounting in an inline/holder configuration.
DFJ-175
DFJ-175 by Eaton Corp is a 600V, 175A fast blow electric fuse with 200kA breaking capacity. Measuring 41.4mm x 76.2mm, it has TAB/BLADE terminals and mounts inline/holder. Ideal for circuit protection in various applications meeting CSA and UL standards.
0697-3150-01
Bel Fuse 0697-3150-01 is a MICRO fuse with 3.15A rated current and 250V AC voltage. With a nominal joule integral of 58J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
SF-0603SP600-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603S063-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
SF-0603S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
SF-0603FP150F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
SF-0603FP020F-2
Bourns SF-0603FP020F-2 fuse, rated 0.2A, 35V AC/65V DC, with fast blow characteristic and 0.00142J joule integral. Ideal for circuit protection in electronics applications due to UL standard compliance and compact 1.6mm x 0.81mm x 0.3mm size for surface mounting method.
SF-0603FP025F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: .25 A; Terminal Shape: WRAPAROUND;
SF-0603FP050M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
SF-0603S400-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
SF-0603SP100-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F100-2
Bourns SF-0603F100-2 fuse, 1A rated current, 32V DC voltage, 0.084 ohm resistance. Fast blow characteristic for electric circuit protection in surface mount applications. Dimensions: 1.6mm x 0.8mm x 0.45mm with UL reference standard compliance.
SF-0603F315-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .089 J;
SF-0603FP160-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
SF-0603S200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
SF-0603S500-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
SF-0603S500M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 35 A;
SF-0603SA800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-0603SP250-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 105 Cel;
SF-0603S250M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; Reference Standard: CUL; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved