Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SF-0603FP025F-2 fuse, rated 0.25A with fast blow characteristic, is ideal for electric circuit protection at 35V AC and 65V DC. With a trip time of 0.2s, it offers a rated breaking capacity of 13A and operates b/w -55°C to 90°C temperatures. Suitable for surface mount applications per UL standards.
Median Price
$0.440
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.620
100+ parts
$0.438
1k+ parts
$0.335
10k+ parts
$0.272
Newark
$0.698
$0.649
-
DigiKey
$0.750
$0.437
$0.334
Master Electronics
$0.314
$0.265
Verical
$0.370
$0.311
Arrow
$0.324
$0.318
Farnell
$0.330
$0.327
Element14
$0.891
$0.647
$0.634
Chip1Stop
$0.245
Electro Sonic
$0.292
TME
$0.326
Nova Conductors
Ampacity Inc.
$0.208
Authorized Procurement Solutions
Continental Prestige Electronics
$0.391
$0.359
Glotronic Ltd.
Argo Parts USA
Aranea Global
With a low joule integral, this fuse provides efficient protection for your circuit without excessive energy dissipation. This can help prevent damage to sensitive components in your system.
This fuse is well suited for applications with a voltage rating of up to 35V, providing reliable protection for your circuit against overloads and short circuits within this range.
The fast trip time of 0.2 seconds helps to quickly disconnect the circuit in the event of a fault, minimizing potential damage to connected devices and ensuring rapid response to overcurrent conditions.
The compact size of 1.6 mm makes this fuse suitable for space-constrained applications where minimizing footprint is essential. Its small form factor allows for easy integration into densely packed circuit boards.
With a rated current of 0.25 A, this fuse is designed to protect low-power circuits against overcurrent conditions. It offers precise protection tailored to the specific current requirements of your application.
The high maximum operating temperature of 90°C ensures that this fuse can reliably perform in demanding environments without overheating. It offers robust protection even in elevated temperature conditions.
The fast blow characteristic of this fuse ensures rapid disconnection of the circuit in response to overcurrent conditions. This feature provides effective protection for your devices by quickly interrupting current flow when needed.
With a rated DC voltage of 65V, this fuse is suitable for applications that require protection against overcurrents in DC circuits. It offers reliable performance and safety in systems operating within this voltage range.
Fuses SF-0603FP025F-2 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
SF-0603FP025F-2 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
PCN Design/Specification - Mult Devs Label 17-Jan-2022
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Laube Technology
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Hy Electronic
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Cheng-yi Electronic
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
AGC-20-R
Eaton Corporation
Eaton Corporation's AGC-20-R fuse, rated at 20A and 32V, offers fast blow characteristic with a pre-arcing rating of 1.438 A2/s. With dimensions of 6.3x32mm, it is used for electric circuit protection in applications requiring a max operating temperature of 125°C.
LP-CC-1-6/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
3403.0169.24
Schurter Ag
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
LPJ-200SP
LPJ-200SP by Eaton Corporation is a 600V J-class fuse with a rated current of 200A. It has a time delay blow characteristic and is suitable for circuit protection in applications such as inline or holder mounting.
JJS-60
The Eaton Corporation JJS-60 fuse, rated at 600V and 60A with a very fast blow characteristic, is ideal for electric circuit protection. With a compact body size of 20.6mm x 39.7mm and mounting feature for inline/holder use, it meets CE, CSA, and UL standards.
0468001.NR
Littelfuse 0468001.NR fuse, rated at 63V and 1A, with trip time of 0.0015s. Ideal for circuit protection in electronics due to slow blow characteristic and compact size of 3.18mm x 1.52mm x 0.58mm. Compliant with CSA and UL standards for reliable performance in various applications.
LPJ-400SP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
17.5TDLSJ16
The Eaton Corporation 17.5TDLSJ16 fuse is a 16A electric fuse with a rated AC/DC voltage of 17500V, offering a high breaking capacity of 50000A. With dimensions of 51mm x 292mm and built-in indicator features, it is commonly used for circuit protection in various applications requiring reliable overcurrent protection.
FWP-40A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 40 A; Terminal Shape: END CAP;
0697-3150-01
Bel Fuse
Bel Fuse 0697-3150-01 is a MICRO fuse with 3.15A rated current and 250V AC voltage. With a nominal joule integral of 58J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature.
ATDR6
Mersen S A
Mersen S A's ATDR6 fuse, rated 6A with 600V AC & 300V DC voltage, features time delay blow characteristic. Measuring 10.4mm x 38.1mm, it has a rated breaking capacity of 200kA and is ideal for electric circuit protection in various applications.
LPJ-400SPI
BK/ATM-30
The Eaton Corporation BK/ATM-30 fuse is a 30A electric fuse with fast blow characteristic, rated for 32V DC voltage. With dimensions of 10.92mm x 3.81mm x 8.81mm, it has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for inline mounting in circuit protection applications, meeting UL standards.
FNQ-R-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
0466.750NR
Littelfuse 0466.750NR is a 1206 size fuse with 0.75A rated current and 63V rated voltage. It offers very fast blow characteristic, 0.2s trip time, and 0.0276J nominal joule integral. Ideal for electric circuit protection in applications requiring surface mount fuses with CSA and UL standards compliance.
SR-5-1A-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Height: 8.1 mm;
PTS120660V010
Eaton Corporation's PTS120660V010 is a 1206-sized electric fuse with a rated voltage of 60V and a rated current of 0.1A. It has a fast blow characteristic and is suitable for surface mount applications.
170M2619
The Eaton Corporation 170M2619 fuse has a rated current of 315A and a rated breaking capacity of 200kA, suitable for electric fuse circuit protection at 700V AC. With dimensions of 54mm x 30mm x 51mm, it features TAB/BLADE terminals and built-in INDICATOR, meeting CE, CSA, DIN, IEC, and UL standards.
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SF-0603S050-2
Bourns
Bourns SF-0603S050-2 fuse, rated 0.5A and 50V DC, with slow blow characteristic and 5-second trip time. Ideal for circuit protection in electronics due to compact 1.6mm x 0.8mm x 0.45mm size and surface mounting feature. Compliant with CUL and UL standards for reliable performance in a range of applications.
SF-0603SP600-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 6 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F050-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 50 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Body Height: .45 mm;
SF-0603S063-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: .63 A; Terminal Shape: WRAPAROUND;
SF-0603S300-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
SF-0603FP150F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
SF-0603FP020F-2
Bourns SF-0603FP020F-2 fuse, rated 0.2A, 35V AC/65V DC, with fast blow characteristic and 0.00142J joule integral. Ideal for circuit protection in electronics applications due to UL standard compliance and compact 1.6mm x 0.81mm x 0.3mm size for surface mounting method.
SF-0603FP050M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND; Minimum Operating Temperature: -55 Cel;
SF-0603S400-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 4 A; Terminal Shape: WRAPAROUND;
SF-0603SP100-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND; Fuse Size: 0603;
SF-0603F100-2
Bourns SF-0603F100-2 fuse, 1A rated current, 32V DC voltage, 0.084 ohm resistance. Fast blow characteristic for electric circuit protection in surface mount applications. Dimensions: 1.6mm x 0.8mm x 0.45mm with UL reference standard compliance.
SF-0603F315-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND; Nominal Joule Integral: .089 J;
SF-0603FP160-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 32 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
SF-0603S200-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
SF-0603S250-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
SF-0603S500-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
SF-0603S500M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND; Rated Breaking Capacity: 35 A;
SF-0603SA800M-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 24 V; Rated Current: 8 A; Terminal Shape: WRAPAROUND; Packing Method: TR, 7 INCH;
SF-0603SP250-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 32 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND; Maximum Operating Temperature: 105 Cel;
SF-0603FP0375F-2
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 35 V; Rated DC Voltage: 65 V; Rated Current: .375 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved