Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SDR1006-471KL is a surface mount fixed inductor with 470uH nominal inductance, 1.48 ohm DC resistance, and 10% tolerance. Ideal for power applications, it operates b/w -40°C to 125°C with a max rated current of 0.42A.
Median Price
$0.482
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.680
100+ parts
$0.467
1k+ parts
$0.331
10k+ parts
-
DigiKey
$0.690
Element14
$1.080
$0.715
$0.551
Verical
$0.283
$0.273
Arrow
$0.280
$0.272
Avnet
$0.245
Nova Conductors
$0.384
J2 Sourcing AB
Electro Sonic
$0.376
$0.322
IBS Electronics
$0.466
$0.401
Vyrian
Bristol Electronics
ComSIT Distribution GmbH
Atlantic Semiconductor
Diverse Electronics
LIBRA Elektronik GmbH
Semtec, LLC
Elcom Components
Ampacity Inc.
$0.197
Aranea Global
$0.361
Eastek
$0.320
Perfect Parts
Futuretech Components
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
$0.340
Allows for easy and quick installation on PCBs, making it suitable for compact electronic devices.
Dual ended terminals provide flexibility in wiring and allow for better connectivity in circuits.
Designed for efficient performance at low frequencies, ideal for power applications.
Provides a high level of inductance suitable for power applications and filtering in circuits.
Can withstand high temperatures, ensuring reliability in various operating conditions.
Capable of handling a relatively high current, making it suitable for power applications.
Versatile usage in a variety of applications, providing flexibility in circuit design.
Ferrite core offers high inductance and low losses, making it efficient for power applications.
High self-resonance frequency ensures stability in high-frequency applications.
Low DC resistance minimizes power losses and ensures efficiency in power transmission.
Fixed Inductors SDR1006-471KL attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SDR1006-471KL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Multiple Devices Revision Product Improvement 25/Aug/2020
PCN Assembly/Origin - Magnetic products Oct/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Nte Electronics
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148WT
Jiangsu Changjiang Electronics Technology
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Gec Plessey Semiconductors
2N7002
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
CM453232-102KL
Bourns
Bourns CM453232-102KL is a surface mount fixed inductor with 1000uH nominal inductance, 40 ohm DC resistance, and 10% tolerance. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 100°C.
XAL5030-472MEC
Coilcraft
Coilcraft XAL5030-472MEC is a shielded, surface mount inductor with 4.7uH nominal inductance and 5.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 23MHz and AEC-Q200 reference standard compliance.
B82498F1472J000
TDK
The TDK B82498F1472J000 is a 0805 SMT fixed inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 3.8 ohm, and self-resonance frequency of 210 MHz. Ideal for general purpose use due to its compact rectangular package design and high quality factor at nominal inductance.
IDCP2218ER101M
Vishay Intertechnology
Vishay Intertechnology's IDCP2218ER101M is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for high current applications, this general purpose inductor features a ferrite core and operates b/w -40°C to 125°C.
IHLP5050FDER4R7M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Finish: Tin (Sn);
LQW15AN8N7G00D
Murata Manufacturing
Murata Manufacturing's LQW15AN8N7G00D is a wirewound chip inductor with 0.0087 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish over nickel, it operates b/w -55 to 125 °C with a max rated current of 0.54 A. This general-purpose inductor has a Q factor of at least 25 at 250 MHz test frequency.
DRA124-681-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
B82479A1333M000
B82479A1333M000 by TDK is a surface mount fixed inductor with a nominal inductance of 33 uH and max rated current of 3 A. It is a general purpose inductor suitable for power applications, with a temperature range from -55 to 150 °C.
DR127-150-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQP15MN1N0W02D
Murata Manufacturing's LQP15MN1N0W02D is a 0402 chip inductor with 0.001 uH nominal inductance, 6000 MHz self-resonance frequency, and 85°C max operating temp. Ideal for RF applications due to its high quality factor and low DC resistance.
MLZ2012M150WT000
The TDK MLZ2012M150WT000 is a shielded fixed inductor with 15uH nominal inductance, 0.95 ohm DC resistance, and 0.25A max rated current. Ideal for general purpose applications, this SMT component operates b/w -55 to 125 °C and features dual-ended terminals.
PE-53932NL
Pulse Electronics
PE-53932NL by Pulse Electronics is a fixed inductor with 37uH nominal inductance, 2.24A max current, and -40 to 130°C operating temp range. Ideal for power applications, this toroid-shaped inductor features amorphous magnetic core material and a simple switcher design.
SLF12555T-330M1R9-PF
SLF12555T-330M1R9-PF by TDK is a shielded, surface mount inductor with 33uH nominal inductance and 3.1A max rated current. Ideal for power applications, it features a dual-ended terminal placement and operates b/w -40°C to 105°C temperature range.
74438356047HT
Wuerth Elektronik & Kg
Wurth Elektronik's 74438356047HT is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, featuring a self-resonance frequency of 18MHz and DC resistance of 0.0748 ohm.
SRP1038A-2R2M
Bourns SRP1038A-2R2M is a shielded, dual-ended SMT inductor with 2.2uH nominal inductance and 12A max rated current. Ideal for power applications, it has a compact size of 11x10x3.8mm, operates b/w -55 to 150°C, and meets AEC-Q200 standards.
SRR0603-101KL
The Bourns SRR0603-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.5 ohm DC resistance. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 9MHz and operating temperature range from -40°C to 125°C.
B78108S1222K000
B78108S1222K000 by TDK is a 2.2uH general purpose inductor with 1A max current, 140MHz self-resonance freq, and -55 to 125°C operating temp range. Ideal for RF applications due to its high Q factor at 7.96MHz, this axial inductor features a tubular package design with tin finish terminals.
IHLP4040DZER4R7M01
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Shape: WRAPAROUND;
CTX100-5-52-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -40 Cel;
BWVS005050404R7M00
Yageo
Yageo BWVS005050404R7M00 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 2.88A max rated current. Ideal for power applications, this general purpose inductor has a compact 2020 size package and operates b/w -55°C to 125°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PG0015.474NL
Pulse
SDR1005-2R2ML
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
SDR1005-101KL
Bourns SDR1005-101KL is a surface mount fixed inductor with 100uH nominal inductance, 1A max current, and 10% tolerance. Ideal for power applications, it operates b/w -40°C to 125°C with a self-resonance frequency of 8MHz.
SDR1005-330KL
SDR1005-3R3ML
SDR1005-3R3ML by Bourns is a surface mount fixed inductor with a nominal inductance of 3.3 uH and max rated current of 5 A. It is a general purpose inductor suitable for power applications, with a self-resonance frequency of 54 MHz and operating temperature range from -40 to 125 °C.
SDR1006-102KL
SDR1006-2R2ML
SDR1006-2R2ML by Bourns is a surface mount fixed inductor with a nominal inductance of 2.2 uH and max rated current of 5.4 A. It is commonly used as a power inductor for general purpose applications, offering a self-resonance frequency of 68 MHz and DC resistance of 0.021 ohm.
SDR1005-470KL
Bourns SDR1005-470KL is a surface mount fixed inductor with 47uH nominal inductance, 1.4A max current, and 10% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 12MHz.
SDR1307-3R3ML
SDR1005-102KL
Bourns SDR1005-102KL is a fixed inductor with 1000uH nominal inductance, 3.9 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This surface mount component operates b/w -40 to 125 °C with a max rated current of 0.3A.
SDR1005-220ML
SDR1005-151KL
SDR1307-3R3M
SDR1006-152KL
Bourns SDR1006-152KL is a fixed inductor with 1500uH nominal inductance, 5 ohm DC resistance, and 1.7MHz self-resonance frequency. Ideal for power applications, this general-purpose inductor has dual-ended terminals and operates b/w -40°C to 125°C temperature range.
SDR1307-330KL
SDR1006-101KL
SDR1006-151KL
SDR1006-680KL
SDR1030-102K
SDR1005-681KL
SDR1006-471K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved