Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 74404052047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 57MHz. Ideal for general purpose use with AEC-Q200 reference standard compliance.
Median Price
$1.188
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.980
100+ parts
$0.760
1k+ parts
$0.610
10k+ parts
-
RS (Exports)
$1.100
$0.880
$0.710
Bürklin Elektronik
$1.120
$1.060
$0.780
Distrelec
$1.255
$0.725
DigiKey
$1.310
$1.206
$0.835
Mouser Electronics
$1.320
$1.210
$0.740
Nova Conductors
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
VNN
Ampacity Inc.
$0.830
Argo Parts USA
Continental Prestige Electronics
$0.818
QUARKTWIN TECHNOLOGY LTD
Netroflash
$0.793
$0.777
Surface mount design allows for easy and efficient installation on circuit boards, saving space and reducing assembly time.
Shielded construction helps to prevent electromagnetic interference, improving overall performance and reliability of the inductor.
Dual-ended terminal placement provides flexibility in circuit design and allows for easy connection to other components.
The nominal inductance of 4.7 uH makes this inductor suitable for various power applications, offering the right amount of inductance.
With a maximum rated current of 2.3 A, this inductor can handle high power loads, making it reliable for demanding applications.
The wide minimum operating temperature range of -40 °C allows for use in both high and low-temperature environments, enhancing versatility.
The compact package height of 2 mm helps in saving space on the circuit board and enables a more streamlined design.
Compliance with the AEC-Q200 standard ensures high performance and reliability, making it suitable for automotive applications.
Fixed Inductors 74404052047 attributes and parameters. Explore more Fixed Inductors devices from Wurth Elektronik
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
Reference Standard:
74404052047 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Continental Device India
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
DRA127-151-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM2HPN2R2MG0L
Murata Manufacturing
LQM2HPN2R2MG0L by Murata is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.3A max rated current. It is a general-purpose RF inductor suitable for applications requiring high-frequency performance and compact size, featuring a multilayer chip construction and ferrite core material.
NR4018T2R2M
Taiyo Yuden
Taiyo Yuden's NR4018T2R2M is a shielded fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.44A and self-resonance frequency of 52MHz, it operates b/w -25°C to 120°C. This SMT inductor features dual-ended terminals and ferrite core construction in a compact 4x4mm package.
SRN4018-2R2M
Bourns
Bourns SRN4018-2R2M is a shielded fixed inductor with 2.2uH nominal inductance, 125°C max operating temp, and 20% tolerance. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material for general purpose use.
DR125-330-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ2012N220LT000
TDK
MLZ2012N220LT000 by TDK is an 0805 SMT fixed inductor with 22uH nominal inductance, 0.67 ohm DC resistance, and 0.3A max rated current. Ideal for general purpose applications requiring a compact, shielded dual-ended inductor with a ferrite core and operating temperature range of -55 to 125°C.
IHLP2525CZER220M11
Vishay Intertechnology
Vishay Intertechnology's IHLP2525CZER220M11 is a shielded, surface mount inductor with 22uH nominal inductance and 2.9A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.135 ohm and operates b/w -55°C to 125°C temperatures.
DRA74-100-R
IHLP6767GZER330M11
Vishay Intertechnology's IHLP6767GZER330M11 is a shielded, surface mount inductor with 33uH nominal inductance and 10.7A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 4.8MHz and operates b/w -55°C to 125°C.
DR127-100-R
Coiltronics
77A-100M-00
Fastron Electronics
77A-100M-00 by Fastron Electronics is a general purpose inductor with 10uH nominal inductance, 0.042 ohm DC resistance, and 5A max rated current. It is used for various applications requiring a fixed inductor with tubular construction and ferrite core material.
PE-53117NL
Pulse Electronics
PE-53117NL by Pulse Electronics is a general purpose inductor with 292uH nominal inductance, 0.15 ohm DC resistance, and 20% tolerance. It is a dual-ended fixed inductor for PCB mount applications, featuring rectangular construction suitable for operating temperatures from -40 to 130°C.
B82471A1104K000
The TDK B82471A1104K000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.52A and operates b/w -55°C to 150°C. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
P0149NL
P0149NL by Pulse Electronics is a shielded, dual-ended power inductor with 100uH nominal inductance. It has a max rated current of 1.23A and operates b/w -40 to 130°C. Ideal for general purpose applications requiring a compact SMT package.
LQH32CN100K33L
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
CM322522-3R3KL
Bourns CM322522-3R3KL is a 1210 size SMT inductor with 3.3uH nominal inductance, ideal for RF applications. Featuring a max operating temp of 125°C, 0.26A rated current, and 1.2 ohm DC resistance, it offers high performance in a compact rectangular package. With a self-resonance frequency of 60MHz and ferrite core material, it's suitable for general purpose use with a Q factor measured at 7.96MHz.
DR74-4R7-R
744773047
Wuerth Elektronik & Kg
Wurth Elektronik 744773047 is a SMT fixed inductor with 4.7uH nominal inductance, 1.82A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its nickel-zinc ferrite core material and rectangular package design.
2300LL-101-H-RC
Bourns 2300LL-101-H-RC is a fixed inductor with 100uH nominal inductance, 7.8A max current, and 0.027 ohm DC resistance. Ideal for high current applications, it features radial terminal placement and horizontal mount construction in a cylindrical toroidal package.
DR127-470-R
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74408942047
Wurth Elektronik
Wurth Elektronik 74408942047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.55A max rated current. Ideal for power applications, this SMT inductor has a rectangular package measuring 4.8mm x 4.8mm x 2.8mm, operating b/w -40°C to 125°C with a DC resistance of 0.103 ohm at a self-resonance frequency of 38MHz.
74404042100
Wurth Elektronik 74404042100 is a shielded SMT inductor with 10uH nominal inductance, 1.2A max current, and 0.15 ohm DC resistance. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C. AEC-Q200 compliant, it's a general-purpose component in a compact 1615 package.
744025100
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
7440430022
Wurth Elektronik 7440430022 is a shielded, dual-ended fixed inductor with 2.2uH nominal inductance and 30% tolerance. Ideal for power applications, it has a max rated current of 2.5A, operating temperature range from -40 to 125 °C, and self-resonance frequency of 100 MHz.
744042100
Wurth Elektronik 744042100 is a shielded SMT inductor with 10uH nominal inductance, 1.3A max current, and 45MHz self-resonance freq. Ideal for power applications due to its compact rectangular package design and high temp range (-40°C to 125°C).
7440710082
744042003
744031004
7440310047
74408942820
74404043220A
Wurth Elektronik's 74404043220A is a shielded, dual-ended fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 1.11A and operates b/w -40 to 125°C. With a compact size of 4x4x2.5mm, it features nickel-zinc ferrite core material and AEC-Q200 reference standard compliance.
74404031100A
744066150
Wurth Elektronik 744066150 is a shielded SMT inductor with 15uH nominal inductance, 3A max current, and -40 to 125°C operating temp. Ideal for power applications due to its general purpose design and rectangular package shape.
744089420056
744066100
Wurth Elektronik 744066100 is a shielded fixed inductor with 10uH nominal inductance, 3.6A max current, and -40 to 125°C operating temp. Ideal for power applications, it features dual-ended terminals and a compact rectangular SMT package measuring 10x10x3.8mm.
744089410043
Wurth Elektronik 744089410043 is a shielded fixed inductor with 0.43uH nominal inductance, 3.8A max current, and 160MHz self-resonance freq. Ideal for power applications due to its dual-ended terminal placement and rectangular package style (SMT).
74404054470
74404300047
744043003
74404052010
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved