Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
Median Price
$0.195
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$0.099
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.250
$0.168
$0.138
$0.117
Mouser Electronics
$0.270
$0.162
$0.152
$0.115
Element14
$0.384
$0.201
$0.163
$0.147
Farnell
$0.412
$0.218
Future Electronics
$0.123
Avnet
$0.120
Master Electronics
Verical
$0.140
Chip1Stop
$8.490
$7.070
Nova Conductors
$0.180
TME
$0.320
$0.124
$0.105
$0.101
IBS Electronics
$0.161
NAC Semi
$0.207
Electro Sonic
$0.127
Vyrian
Semicontronic
$0.097
$0.096
Ampacity Inc.
$0.100
Aztec Data Supply Inc.
$0.160
Argo Parts USA
$0.157
Corohmni
$0.322
Continental Prestige Electronics
$0.366
$0.205
Advanced Electronics
$0.562
$0.511
$0.461
Perfect Parts
Abacus Technologies
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$3.221
Easy to install and saves space on the PCB.
Provides flexibility in circuit design and easy connectivity.
Optimized for high frequency applications.
Suitable for power inductor applications and providing a good balance between inductance and size.
Can withstand high temperatures, making it suitable for various environments.
Capable of handling higher currents without saturation.
Versatile usage in a wide range of electronic circuits.
Low resistance ensures efficient power transfer and minimal power loss.
Provides high magnetic permeability and low core losses, suitable for power applications.
Meets automotive industry standards for quality and reliability.
Fixed Inductors NRS4018T4R7MDGJV attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
Reference Standard:
NRS4018T4R7MDGJV Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Gec Plessey Semiconductors
Won-top Electronics
FDLL4148
National Semiconductor
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Unitrode
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
IHLP2525CZER6R8M01
Vishay Intertechnology
Vishay Intertechnology's IHLP2525CZER6R8M01 is a shielded, surface mount inductor with 6.8uH nominal inductance and 4.5A max rated current. Ideal for high current applications, this general purpose inductor has a self-resonance frequency of 21MHz and operates b/w -55°C to 125°C.
IHLP5050FDER4R7M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Finish: Tin (Sn);
TLC/1A-101M-00
Fastron Electronics
TLC/1A-101M-00 by Fastron Electronics is a general purpose inductor with 100uH nominal inductance, 0.115 ohm DC resistance, and 20% tolerance. It has a toroidal construction, radial terminal placement, and operates b/w -55 to 115 °C. Ideal for applications requiring fixed inductors such as power supplies and filters due to its circular package shape and powdered iron core material.
FSLB2520-470K
Toko
Toko's FSLB2520-470K is a surface mount fixed inductor with 47uH nominal inductance, 5.4 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ferrite core material. Operating temperature ranges from -40°C to 85°C making it suitable for various general purpose inductor needs.
LBR2012T100KV
Taiyo Yuden
The Taiyo Yuden LBR2012T100KV is a surface mount fixed inductor with 10uH nominal inductance, 32MHz self-resonance frequency, and -40 to 105°C operating temperature range. Ideal for RF applications, this general purpose inductor has dual-ended terminals and a wraparound shape in a rectangular package.
XAL5030-222MEB
Coilcraft
Coilcraft XAL5030-222MEB is a shielded, surface mount inductor with 2.2uH nominal inductance and 9.7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 38MHz and AEC-Q200 reference standard compliance.
FPT705-230-R
Eaton Corporation
Eaton Corporation's FPT705-230-R is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.23uH, max rated current of 13A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound tin finish on its 4 terminals.
DR74-680-R
Eaton Corporation's DR74-680-R is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 1.03A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
MLZ1608N100LT
TDK
TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.
DR125-330-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQP03TN3N3B02D
Murata Manufacturing
LQP03TN3N3B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.0033 uH and can operate at temperatures up to 125 °C. This general purpose inductor is commonly used in RF applications.
MLZ2012M3R3ATD69
MLZ2012M3R3ATD69 by TDK is an 0805 fixed inductor with 3.3uH nominal inductance, 0.2 ohm DC resistance, and 20% tolerance. Ideal for decoupling circuits, it operates b/w -55 to 125 °C with a max rated current of 0.5A. This shielded SMT inductor features dual-ended terminals and ferrite core material.
LQW15AN6N2C00D
Murata Manufacturing's LQW15AN6N2C00D is a wirewound chip inductor with 0.0062 uH nominal inductance, 8000 MHz self-resonance frequency, and 3.23% tolerance. Ideal for RF applications due to its high Q factor at 250 MHz test frequency. Surface mount design with dual-ended terminals makes it suitable for compact electronic devices.
5606
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Shape: PRINTED WIRING PIN;
B82791H2351N001
B82791H2351N001 by TDK is a fixed inductor with 22000 uH nominal inductance, 1.9 ohm DC resistance, and 0.35 A max rated current. Ideal for power applications, it features a rectangular package with dual in-line terminals suitable for PCB mounting. Operating temperature ranges from -40 to 125 °C.
NR4018T2R2M
Taiyo Yuden's NR4018T2R2M is a shielded fixed inductor with 2.2uH nominal inductance, suitable for power applications. With a max rated current of 1.44A and self-resonance frequency of 52MHz, it operates b/w -25°C to 120°C. This SMT inductor features dual-ended terminals and ferrite core construction in a compact 4x4mm package.
IHLP5050CEER2R2M01
Vishay Intertechnology's IHLP5050CEER2R2M01 is a shielded, surface mount inductor with 2.2uH nominal inductance and 16A max rated current. Ideal for high current applications, this rectangular package has dual-ended terminals and operates b/w -55°C to 125°C.
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
ACT45B-101-2P-TL003
Epcos Ag
GENERAL PURPOSE INDUCTOR; Manufacturer Series: ACT45B; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
HK100515NJ-T
Surface Mountable Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NRS4018T6R8MDGJ
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
NRS4018T3R3MDGJ
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
NRS4018T2R2MDGJV
NRS4018T2R2MDGJV by Taiyo Yuden is a surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current, suitable for power applications. Featuring a rectangular package with dimensions of 4mm x 4mm x 1.8mm, it operates b/w -40°C to 125°C and has a self-resonance frequency of 60MHz.
NRS4018T100MDGJV
Taiyo Yuden's NRS4018T100MDGJV is a SMT fixed inductor with 10uH nominal inductance, 1.2A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.
NRS4018T220MDGJV
NRS4018T100MDGJ
NRS4018T100MDGJ by Taiyo Yuden is a fixed inductor with 10uH nominal inductance, 1.2A max rated current, and 125°C max operating temp. Ideal for power applications, this SMT inductor features a ferrite core, 0.18 ohm DC resistance, and dual-ended terminals for efficient performance.
NRS4012T100MDGJ
Taiyo Yuden's NRS4012T100MDGJ is a fixed inductor with 10uH nominal inductance, 1.1A max current, and 30MHz self-resonance freq. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -25°C to 125°C.
NRS4018T100MDGJ8
NRS4018T100MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 25MHz and operates b/w -40 to 125°C.
NRS4018T220MDGJ
Taiyo Yuden's NRS4018T220MDGJ is a chip inductor with 22uH nominal inductance, 0.348 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for power applications, this SMT component has a max operating temperature of 125°C and is a general-purpose inductor suitable for various electronic devices.
NRS4018T4R7MDGJ
NRS4018T220MDGJ8
NRS4018T220MDGJ8 by Taiyo Yuden is a fixed inductor with 22uH nominal inductance, 0.29 ohm DC resistance, and 15 MHz self-resonance frequency. It is a power inductor designed for general purpose applications, featuring dual-ended terminals and shielded construction. Ideal for SMT mounting with a compact size of 4x4x1.8mm, it operates b/w -40°C to 125°C with a max rated current of 0.72A.
NRS4018T4R7MDGJ8
NRS4018T1R0NDGJ
NRS4012T1R0NDGG
NRS4012T1R0NDGG by Taiyo Yuden is a SMT fixed inductor with 1uH nominal inductance, 2.2A max current, and 100MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 4x4x1.2mm.
NRS4018T2R2MDGJ
NRS4018T2R2MDGJ by Taiyo Yuden is a fixed inductor with 2.2uH nominal inductance, suitable for power applications. It has a max rated current of 2.2A and operates b/w -25 to 125°C, featuring a matte tin finish and ferrite core material. This general purpose inductor is surface mountable with dual-ended terminals, ideal for various electronic circuits.
NRS4018T2R2MDGJ8
NRS4018T1R0NDGJV
NRS4018T3R3MDGJV
NRS4018T3R3MDGJV by Taiyo Yuden is a surface mount fixed inductor with a nominal inductance of 3.3 uH and max rated current of 2 A. It is a general purpose inductor suitable for power applications, featuring a rectangular package and dual-ended terminal placement.
NRS4018T6R8MDGJ8
NRS4018T470MDGJ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved