Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NRS4018T1R0NDGJ by Taiyo Yuden is a fixed inductor with 1uH nominal inductance, 3.2A max rated current, and 90MHz self-resonance frequency. Ideal for power applications, this SMT component has a dual-ended terminal placement and operates b/w -25°C to 125°C.
Median Price
$0.200
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Element14
1+ parts
$0.171
100+ parts
$0.091
1k+ parts
$0.084
10k+ parts
$0.078
DigiKey
$0.133
$0.109
-
Mouser Electronics
$0.110
$0.093
Newark
$0.219
$0.152
$0.129
$0.117
Farnell
$0.287
$0.175
Verical
$0.113
Chip1Stop
$0.089
Nova Conductors
$0.108
TME
$0.290
$0.071
$0.061
$0.058
Bristol Electronics
$0.396
$0.198
$0.079
$0.050
NAC Semi
$0.077
Dan-Mar Components
Chip Stock
Q Components
Vyrian
IBS Electronics
$0.112
Electro Sonic
$0.085
Prism Electronics
Semi Source
Euro-Tech
Lantek
Mil-Aero Solutions, Inc.
Inventory MP
Semicontronic
$0.060
Ampacity Inc.
Argo Parts USA
$0.105
Netroflash
Aztec Data Supply Inc.
Advanced Electronics
$0.125
$0.115
Corohmni
$0.226
Continental Prestige Electronics
$0.235
$0.130
Glotronic Ltd.
Abacus Technologies
GreenTree Electronics
RC Electronics
Perfect Parts
Eastek
Kepictronics
Authorized Procurement Solutions
Futuretech Components
Robosynatics
Lucentia Tech
Surface mount design allows for easy and convenient installation on PCBs, saving valuable space and reducing assembly time.
Dual ended terminals provide flexibility in circuit design and make it easier to connect the inductor in various configurations.
Tested at a high frequency, ensuring accurate and reliable performance in high-frequency applications.
Ideal for applications requiring a moderate level of inductance, providing the right balance between efficiency and size.
With a high maximum rated current, this inductor can handle heavy loads without overheating or performance degradation.
Ferrite core material offers high magnetic permeability, low core loss, and excellent performance at high frequencies, making it suitable for a wide range of applications.
Fixed Inductors NRS4018T1R0NDGJ attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
NRS4018T1R0NDGJ Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DRA127-151-R
Eaton Corporation
Eaton Corporation's DRA127-151-R is a shielded, fixed inductor with 151.2uH nominal inductance and 1.52A max rated current. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -40°C to 165°C.
SRN3015-2R2M
Bourns
Bourns SRN3015-2R2M is a shielded SMT inductor with 2.2uH nominal inductance, 1.8A max current, and 90MHz self-resonance freq. Ideal for power applications due to its compact size (3x3x1.5mm) and dual-ended terminals for easy installation in various electronic devices.
CTX100-5-52M-R
The Eaton Corporation CTX100-5-52M-R is a fixed inductor with 100uH nominal inductance, 8.2A max current, and -40 to 75°C operating temp range. Ideal for power applications, it features radial terminals, iron core material, and a toroidal package style for efficient vertical mounting.
LQW15AN2N7C00D
Murata Manufacturing
LQW15AN2N7C00D by Murata is a wirewound chip inductor with 0.0027 uH nominal inductance, 15000 MHz self-resonance frequency, and 20 min quality factor at L-nom. It is designed for RF applications, featuring dual-ended terminals and matte tin over nickel finish.
DR127-100-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
CM322522-4R7KL
Bourns CM322522-4R7KL is a 1210-sized SMT inductor with 4.7uH nominal inductance, ideal for RF applications. Featuring a max operating temperature of 125°C and rated current of 0.22A, it offers a min quality factor of 30 at the self-resonance frequency of 50MHz.
RLB0914-102KL
RLB0914-102KL by Bourns is a 1000uH fixed inductor with 0.65mm lead diameter and 5mm lead spacing. Ideal for RF applications, it has a max operating temperature of 125°C, self-resonance frequency of 1.3MHz, and matte tin terminal finish.
DR74-220-R
DR74-220-R by Eaton Corp is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 1.75A and operates b/w -40 to 125°C. Ideal for power applications requiring general purpose inductors due to its compact rectangular package design.
MLZ2012N100LT
TDK
TDK MLZ2012N100LT is an 0805-sized fixed inductor with 10uH nominal inductance, suitable for RF applications. It features a max operating temperature of 125°C, 0.3 ohm DC resistance, and self-resonance frequency of 50MHz. This shielded inductor has dual-ended terminals and is designed as a general-purpose component for surface-mount applications.
DR73-100-R
Cooper Electronic Technologies
DFE201612E-R47M=P2
Murata Manufacturing's DFE201612E-R47M=P2 is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance and 4.5A max current rating. Ideal for power applications, it operates b/w -40 to 125°C and features a compact SMT package measuring 2x1.6x1.2mm.
DR125-470-R
IHLP2020CZER2R2M01
The Vishay Intertechnology IHLP2020CZER2R2M01 is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 5.8 A. It is designed for high current applications and has a compact rectangular package size of 2020, making it suitable for various electronic devices.
DR74-151-R
PE-0402CD400KTG
Pulse Electronics
PE-0402CD400KTG by Pulse Electronics is a chip inductor with 0.04 uH nominal inductance, 250 MHz test frequency, and 10% tolerance. Ideal for RF applications due to its 2240 MHz self-resonance frequency and dual-ended terminal placement. Suitable for SMT mounting with gold finish terminals.
B82721K2122N020
B82721K2122N020 by TDK is a fixed inductor with 6800uH nominal inductance, 1.2A max current, and -40 to 125°C operating temp. Ideal for power applications, it features dual in-line terminals and ferrite core material in a rectangular package style for PCB mount.
SRR1280-330M
Bourns SRR1280-330M is a shielded, surface mount inductor with 33uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 9.5MHz.
MLZ1608N100LT
TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.
HC2LP-2R2-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
LQH43CN220K03L
Murata Manufacturing's LQH43CN220K03L is a surface mount fixed inductor with 22uH nominal inductance, 0.6 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NRS4018T6R8MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
NRS4018T3R3MDGJ
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
NRS4018T2R2MDGJV
NRS4018T2R2MDGJV by Taiyo Yuden is a surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current, suitable for power applications. Featuring a rectangular package with dimensions of 4mm x 4mm x 1.8mm, it operates b/w -40°C to 125°C and has a self-resonance frequency of 60MHz.
NRS4018T100MDGJV
Taiyo Yuden's NRS4018T100MDGJV is a SMT fixed inductor with 10uH nominal inductance, 1.2A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.
NRS4018T4R7MDGJV
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
NRS4018T220MDGJV
NRS4018T100MDGJ
NRS4018T100MDGJ by Taiyo Yuden is a fixed inductor with 10uH nominal inductance, 1.2A max rated current, and 125°C max operating temp. Ideal for power applications, this SMT inductor features a ferrite core, 0.18 ohm DC resistance, and dual-ended terminals for efficient performance.
NRS4012T100MDGJ
Taiyo Yuden's NRS4012T100MDGJ is a fixed inductor with 10uH nominal inductance, 1.1A max current, and 30MHz self-resonance freq. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -25°C to 125°C.
NRS4018T100MDGJ8
NRS4018T100MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 25MHz and operates b/w -40 to 125°C.
NRS4018T220MDGJ
Taiyo Yuden's NRS4018T220MDGJ is a chip inductor with 22uH nominal inductance, 0.348 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for power applications, this SMT component has a max operating temperature of 125°C and is a general-purpose inductor suitable for various electronic devices.
NRS4018T4R7MDGJ
NRS4018T220MDGJ8
NRS4018T220MDGJ8 by Taiyo Yuden is a fixed inductor with 22uH nominal inductance, 0.29 ohm DC resistance, and 15 MHz self-resonance frequency. It is a power inductor designed for general purpose applications, featuring dual-ended terminals and shielded construction. Ideal for SMT mounting with a compact size of 4x4x1.8mm, it operates b/w -40°C to 125°C with a max rated current of 0.72A.
NRS4018T4R7MDGJ8
NRS4012T1R0NDGG
NRS4012T1R0NDGG by Taiyo Yuden is a SMT fixed inductor with 1uH nominal inductance, 2.2A max current, and 100MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 4x4x1.2mm.
NRS4018T2R2MDGJ
NRS4018T2R2MDGJ by Taiyo Yuden is a fixed inductor with 2.2uH nominal inductance, suitable for power applications. It has a max rated current of 2.2A and operates b/w -25 to 125°C, featuring a matte tin finish and ferrite core material. This general purpose inductor is surface mountable with dual-ended terminals, ideal for various electronic circuits.
NRS4018T2R2MDGJ8
NRS4018T1R0NDGJV
NRS4018T3R3MDGJV
NRS4018T3R3MDGJV by Taiyo Yuden is a surface mount fixed inductor with a nominal inductance of 3.3 uH and max rated current of 2 A. It is a general purpose inductor suitable for power applications, featuring a rectangular package and dual-ended terminal placement.
NRS4018T6R8MDGJ8
NRS4018T1R5NDGJ8
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved