Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CM322522-3R3KL is a 1210 size SMT inductor with 3.3uH nominal inductance, ideal for RF applications. Featuring a max operating temp of 125°C, 0.26A rated current, and 1.2 ohm DC resistance, it offers high performance in a compact rectangular package. With a self-resonance frequency of 60MHz and ferrite core material, it's suitable for general purpose use with a Q factor measured at 7.96MHz.
Median Price
$0.127
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.166
100+ parts
$0.153
1k+ parts
$0.144
10k+ parts
-
Mouser Electronics
$0.290
$0.189
$0.138
$0.121
Chip1Stop
$0.068
Master Electronics
$0.093
Avnet
$0.100
Verical
$0.142
Arrow
$0.103
Farnell
Element14
$0.204
$0.167
$0.125
Nova Conductors
$0.133
TME
$0.190
$0.128
$0.101
$0.086
Vyrian
IBS Electronics
$0.208
Cyclops Electronics Ltd
Electro Sonic
$0.099
ComSIT Distribution GmbH
Pegasus Components GmbH
Astute Electronics Inc
Sensible Micro Corp
Schukat
Semicontronic
$0.058
$0.057
$0.056
Ampacity Inc.
Continental Prestige Electronics
$0.131
$0.113
$0.094
$0.070
Argo Parts USA
$0.132
Netroflash
$0.124
Corohmni
$0.147
Advanced Electronics
Aztec Data Supply Inc.
$0.555
GreenTree Electronics
iodParts Technologies Inc.
Surface mount technology allows for easy and efficient installation on a circuit board, saving space and making assembly simpler.
Dual ended terminals provide flexibility in circuit design and can simplify the connection process.
Provides a specific inductance value suited for RF applications, ensuring optimal performance in the intended circuit.
Can withstand high temperatures, making it suitable for a wide range of operating environments.
Capable of handling a relatively high current, making it suitable for various applications.
Low DC resistance helps in minimizing power losses and improving overall efficiency of the inductor.
Fixed Inductors CM322522-3R3KL attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
CM322522-3R3KL Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Mult Devs Product Improvement 28/Jan/2022 Mult Series Product Improvement 25/May/2021
PCN Assembly/Origin - Glue Supplier Change 14/JUL/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
SS14
Fairchild Semiconductor
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Silicon Standard
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2312-V-RC
Bourns
The Bourns 2312-V-RC is a shielded fixed inductor with 100uH nominal inductance and 7A max rated current. It is a high current inductor suitable for general purpose applications, featuring radial terminal placement and cylindrical package design. With a DC resistance of 0.037 ohm, it operates b/w -55 to 105 °C temperature range.
#A1313AN-0004GGH=P3
Murata Manufacturing
GENERAL PURPOSE INDUCTOR;
LBC2518T4R7MV
Taiyo Yuden
Taiyo Yuden's LBC2518T4R7MV is a surface mount fixed inductor with 4.7uH nominal inductance, suitable for RF applications at 7.96 MHz test frequency. This general purpose inductor has a max operating temperature of 105°C and self-resonance frequency of 41 MHz, making it ideal for various electronic circuits requiring high-frequency performance.
0402HPH-R10XJRW
Coilcraft
0402HPH-R10XJRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ceramic core material.
LQH43MN330J03L
Murata Manufacturing's LQH43MN330J03L is a 33uH RF inductor with 1.2 ohm DC resistance and 5% tolerance. Featuring dual-ended terminals, it operates b/w -40 to 85 °C with a max rated current of 0.27 A. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 12 MHz and measures 4.5mm x 3.2mm x 2.6mm in size.
636CY-220M=P3
Toko
636CY-220M=P3 by Toko is a shielded, surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 22uH and max rated current of 0.9A, suitable for DC-DC converter applications due to its general purpose design and ferrite core material.
3613C100K
TE Connectivity
TE Connectivity's 3613C100K is a chip inductor with 10uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and wraparound shape, it operates at -30 to 100°C with max current of 0.25A. With ferrite core material and SMT packaging, it offers high Q-factor at 2.52MHz test frequency.
TLC/0.5A-101M-00
Fastron Electronics
TLC/0.5A-101M-00 by Fastron Electronics is a general purpose inductor with 100uH nominal inductance, 0.22 ohm DC resistance, and 20% tolerance. It has a toroidal construction, radial terminal placement, and operates b/w -55 to 115 °C. Ideal for applications requiring fixed inductors with circular package style and powdered iron core material.
HCM1305-R22-R
Eaton Corporation
HCM1305-R22-R by Eaton Corp is a shielded, surface mount fixed inductor with 0.22uH nominal inductance. It has a max rated current of 51A and operates b/w -55 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and iron powder core material.
ACT45B-510-2P-TL003
Epcos Ag
GENERAL PURPOSE INDUCTOR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Manufacturer Series: ACT45B; JESD-609 Code: e3;
#919AS-1R0N=P3
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Rated Current: 9.7 A; Manufacturer Series: D104C;
2209
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Operating Temperature: 105 Cel;
5609
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Test Frequency: .001 MHz;
NR4018T6R8M
NR4018T6R8M by Taiyo Yuden is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 1.06A max rated current. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 29MHz and operating temperature range from -25°C to 120°C.
NRS5024T4R7MMGJ
Taiyo Yuden's NRS5024T4R7MMGJ is a surface mount fixed inductor with 4.7uH nominal inductance and 2A max rated current. Ideal for power applications, it features a ferrite core, operates b/w -25 to 125 °C, and has a self-resonance frequency of 37 MHz.
DR74-100-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
DR125-101-R
Coiltronics
IHLP5050FDER5R6M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; JESD-609 Code: e3;
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
33467
Vishay Intertechnology
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 12 %; Maximum Rated Current: 205 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CM322522-100KL
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
CM322522-4R7KL
Bourns CM322522-4R7KL is a 1210-sized SMT inductor with 4.7uH nominal inductance, ideal for RF applications. Featuring a max operating temperature of 125°C and rated current of 0.22A, it offers a min quality factor of 30 at the self-resonance frequency of 50MHz.
CM322522-1R0KL
CM322522-220KL
The Bourns CM322522-220KL is a surface mount fixed inductor with a nominal inductance of 22 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and max rated current of 0.11 A.
CM322522-470KL
Bourns CM322522-470KL is a 47uH SMT inductor with dual-ended terminals. It operates at -40 to 125°C, handles 0.06A current, and has a Q of 30 at 2.52MHz. Ideal for RF applications due to its 15MHz self-resonance frequency and ferrite core material.
CM322522-2R2KL
CM322522-R47ML
CM322522-101KL
Bourns CM322522-101KL is a 100uH SMT inductor with 2 terminals, ideal for RF applications. Featuring a max operating temp of 125°C, DC resistance of 11 ohm, and self-resonance frequency of 10 MHz. This general purpose inductor has a Q factor measured at 0.0796 MHz and is constructed with ferrite material.
CM322522-R22ML
Bourns CM322522-R22ML is a 1210 size SMT inductor with 0.22uH nominal inductance, ideal for RF applications. Featuring dual-ended terminals and J bend shape, it offers 0.45A max current and 30 min Q factor at 25.2MHz. With ferrite core material and 350MHz self-resonance frequency, it operates b/w -40 to 125°C.
CM322522-R33ML
The Bourns CM322522-R33ML is a surface mount fixed inductor with a nominal inductance of 0.33 uH, suitable for RF applications. It features a max operating temperature of 125°C, rated current of 0.45 A, and min quality factor of 30 at the nominal inductance frequency. Ideal for general purpose use due to its ferrite core material and compact rectangular package size (3.2mm x 2.5mm x 2.2mm).
CM322522-R47M
Token Electronics Industry
GENERAL PURPOSE INDUCTOR; Package Style (Meter): SMT; Tolerance: 20 %; Case or Size Code: 1210; Minimum Quality Factor (at L-nom): 30; Minimum Operating Temperature: -25 Cel;
CM322522-150KL
CM322522-3R3K
CM322522-3R9K
CM322522-3R3JL
CM322522-3R9JL
CM322522-330KL
CM322522-390KL
CM322522-3R9KL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved