Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Siemens B82422-A1102-K100 is a surface mount RF inductor with 1uH nominal inductance, 0.38A max current, and 320MHz self-resonance frequency. Ideal for general purpose applications requiring high quality factor and low DC resistance.
Median Price
$0.185
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.310
100+ parts
$0.211
1k+ parts
$0.173
10k+ parts
-
Mouser Electronics
$0.164
$0.143
Adafruit Industries
$0.586
$0.557
Verical
$0.113
Arrow
$0.114
TTI Europe
TTI
$0.171
Chip1Stop
$0.162
Newark
$0.219
$0.184
Element14
$0.289
$0.202
$0.198
Bürklin Elektronik
$0.280
$0.228
$0.209
RS (Exports)
$0.163
Farnell
$0.139
Greenchips
$0.115
$0.108
$0.096
$0.092
Nova Conductors
$0.271
TME
$0.175
$0.137
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
Vyrian
Corel Iberica Componentes, S.L.
Lantek
VNN
Bristol Electronics
Prism Electronics
PC Components Company LLC
Pegasus Components GmbH
ACDS - Activité Composants Distribution Service
Odintec Ltd.
Dan-Mar Components
Manoshevitz Elec. Sales
ComSIT Distribution GmbH
ComSIT USA
Martec Srl
Holdelec - ElecDif-Pro
Resion
Speed Components Ltd
Manotoh
NAC Semi
Ampacity Inc.
$0.105
Semicontronic
$0.102
Aztec Data Supply Inc.
$0.157
Argo Parts USA
$0.262
Netroflash
$0.257
$0.252
Bastille Electronics
$0.245
$0.241
Advanced Electronics
Corohmni
$0.712
Perfect Parts
GreenTree Electronics
Abacus Technologies
Metaverse IC Inc.
Futuretech Components
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Assy Fe
Continental Prestige Electronics
$0.189
$0.172
$0.146
Cyclops Electronics Ltd (Excess)
Infinite Electronics LLP (Excess)
Eastek
Speed Components Ltd (Excess)
Easy to mount on PCBs without the need for additional components or hardware.
Facilitates flexible circuit design and easy connection.
Suitable for RF applications and operating frequencies in this range.
Specifically designed for Radio Frequency applications, ensuring optimal performance.
Space-efficient design for compact electronic devices.
Ideal for applications requiring a 1 microhenry inductance value.
Allows for easy and secure soldering of terminals.
Can handle a maximum current of 0.38 Amperes, suitable for many low-power applications.
Indicates good energy storage capacity and low energy losses in the inductor.
Provides reliable electrical contact and corrosion resistance.
Versatile inductor suitable for a wide range of applications.
High self-resonance frequency suitable for RF applications and minimizing interference.
Low DC resistance minimizes power losses and heat generation in the inductor.
High permeability material suitable for high-frequency applications and low core losses.
Indicates the quality factor at a specific frequency, providing valuable performance information.
Tight tolerance of 10% ensures consistent performance and reliability.
Fixed Inductors B82422-A1102-K100 attributes and parameters. Explore more Fixed Inductors devices from Siemens
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Shielded:
Core Material:
Surface Mounted:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
JESD-609 Code:
B82422-A1102-K100 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
American Power Devices
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Diotec Electronics
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
EU2B-YS303C
MLZ1608N220LT000
TDK
MLZ1608N220LT000 by TDK is a surface mount, shielded fixed inductor with a nominal inductance of 22 uH. It has a max operating temperature of 125 °C and a max rated current of 0.19 A. This general purpose inductor is commonly used in various electronic applications.
B82724B2602N001
B82724B2602N001 by TDK is a fixed inductor with 1800uH nominal inductance, 6A max current, and -40 to 125°C operating temp. Ideal for power applications, this general purpose inductor has a rectangular shape, dual in-line terminals, and ferrite core material.
B82477R4104M100
B82477R4104M100 by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 2.35A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features a ferrite core and dual-ended terminals for efficient performance.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LQW15AN8N7G00D
Murata Manufacturing
Murata Manufacturing's LQW15AN8N7G00D is a wirewound chip inductor with 0.0087 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish over nickel, it operates b/w -55 to 125 °C with a max rated current of 0.54 A. This general-purpose inductor has a Q factor of at least 25 at 250 MHz test frequency.
ETQP4M220KVC
Panasonic
Panasonic ETQP4M220KVC is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 5A and operates b/w -55 to 155°C. Ideal for power applications, this general purpose inductor features metal composite core material and dual-ended terminal placement.
MLZ2012N4R7LT000
TDK's MLZ2012N4R7LT000 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 4.7 uH and can handle a max rated current of 0.6 A. This general purpose inductor is suitable for various applications requiring high temperature resistance and low DC resistance.
FPT705-230-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Shielded: NO; Surface Mount: YES; No. of Functions: 2;
LQH32PN2R2NN0L
LQH32PN2R2NN0L by Murata is a shielded, surface mount inductor with 2.2uH nominal inductance and 1.6A max rated current. Ideal for RF applications, it features a self-resonance frequency of 70MHz and operates b/w -40°C to 125°C.
LQH44PN100MP0L
Murata Manufacturing's LQH44PN100MP0L is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.17A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 25MHz and operates b/w -40°C to 125°C.
ASPIAIG-S8050-680M-T
Abracon
ASPIAIG-S8050-680M-T by Abracon is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 1.45 A and a max operating temperature of 125 °C.
LQW15AN3N6B8ZD
Murata Manufacturing's LQW15AN3N6B8ZD is a fixed inductor with 0402 size, 0.0036 uH nominal inductance, and 1.95 A max rated current. Ideal for RF applications, it features dual-ended terminals and operates b/w -55 to 125 °C with a Q factor of at least 30 at 250 MHz.
VLCF4020T-2R2N1R7
VLCF4020T-2R2N1R7 by TDK is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 30% tolerance. It operates b/w -40 to 105°C, handles up to 2.19A current, making it ideal for power applications requiring general purpose inductors in compact SMT packages.
2312-V-RC
The Bourns 2312-V-RC is a shielded fixed inductor with 100uH nominal inductance and 7A max rated current. It is a high current inductor suitable for general purpose applications, featuring radial terminal placement and cylindrical package design. With a DC resistance of 0.037 ohm, it operates b/w -55 to 105 °C temperature range.
7447709470
Wuerth Elektronik & Kg
Wurth Elektronik 7447709470 is a shielded, dual-ended fixed inductor with 47uH nominal inductance. Ideal for power applications, it has a max rated current of 3.8A and operates b/w -40 to 125°C. Its compact SMT package measures 12x12x10mm and complies with AEC-Q200 standards.
NRS4018T6R8MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
NRS4018T4R7MDGJV
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
DR73-100-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQG15HS15NJ02D
Murata Manufacturing's LQG15HS15NJ02D is a 0402-sized fixed inductor with 0.015 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish over nickel, it operates b/w -55 to 125 °C with max current of 0.45 A. This general purpose inductor has a self-resonance frequency of 2500 MHz and min quality factor of 8 at L-nom.
PE-53146NL
Pulse Electronics
PE-53146NL by Pulse Electronics is a dual-ended fixed inductor with 267uH nominal inductance, 0.18 ohm DC resistance, and -40 to 130 °C operating temperature range. Ideal for general purpose applications requiring a 0.02 MHz test frequency and rectangular package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82471A1104K000
The TDK B82471A1104K000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.52A and operates b/w -55°C to 150°C. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
B82472G4104M000
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
B82472-G4104-M
The TDK B82472-G4104-M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55 to 125 °C and has a max rated current of 0.56A. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
B82476A1104M000
B82476A1104M000 by TDK is a surface mount fixed inductor with a nominal inductance of 100 uH and max rated current of 1.3 A. It is a general purpose inductor suitable for power applications, with a rectangular package measuring 12.95 mm in length, 9.4 mm in width, and 5.08 mm in height.
B82422-A1103-K100
Siemens
Siemens B82422-A1103-K100 is a surface mount fixed inductor with 10uH nominal inductance, 0.18A max current, and 1.6 ohm DC resistance. Ideal for RF applications due to its 25MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
B82422A1103K100
The TDK B82422A1103K100 is a 10uH SMT inductor with 27 min Q factor, suitable for RF applications. It has a max operating temp of 150°C, 0.18A rated current, and self-resonance frequency of 25MHz. Ideal for general purpose use in automotive electronics due to AEC-Q200 compliance.
B82498F1472J000
The TDK B82498F1472J000 is a 0805 SMT fixed inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 3.8 ohm, and self-resonance frequency of 210 MHz. Ideal for general purpose use due to its compact rectangular package design and high quality factor at nominal inductance.
B82479-A1104-M
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82472P6104M000
B82422A1102K100
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
B82464-G4103-M
B82462G4103M000
B82462G4103M000 by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.062 ohm and operates b/w -55°C to 150°C temperature range.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
B82498F3331J000
B82476A1103M000
B82476A1103M000 by TDK is a fixed inductor with 10uH nominal inductance, 3.9A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
B82422A1104K100
B82422-A1104-K100
Siemens B82422-A1104-K100 is a surface mount RF inductor with 100uH nominal inductance, 0.065A max current, and 27 min quality factor at 0.1MHz. It is a general purpose inductor with ferrite core, suitable for various applications requiring high-frequency performance.
B82432A1103K000
B82422A1102K158
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved