Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
Median Price
$0.648
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.850
100+ parts
$0.575
1k+ parts
$0.472
10k+ parts
$0.389
TTI
-
$0.447
$0.411
RS (Exports)
Maritex
$0.523
$0.380
$0.337
Nova Conductors
$0.550
Vyrian
LIBRA Elektronik GmbH
VNN
Aztec Data Supply Inc.
$0.240
Advanced Electronics
$0.322
$0.306
Semicontronic
$0.348
$0.339
$0.338
Ampacity Inc.
Continental Prestige Electronics
$0.535
$0.524
Argo Parts USA
$0.519
Aranea Global
$0.539
$0.517
Modulus Dynamics
$0.601
$0.595
$0.576
Corohmni
$0.656
Abacus Technologies
Robosynatics
Lucentia Tech
$24.901
Surface mount design allows for easy and convenient installation on printed circuit boards, saving space and simplifying assembly.
Shielded construction helps minimize electromagnetic interference, ensuring reliable performance in sensitive electronic applications.
Dual-ended terminals provide flexibility in circuit integration and connection options, making the inductor versatile for different applications.
Tested at a frequency of 0.1 MHz, ensuring accurate and reliable performance at typical operating conditions.
Compact rectangular package size (2929) makes it suitable for various electronic devices with limited space.
Rectangular construction offers a sleek and space-saving design, ideal for densely packed circuit layouts.
Designed specifically for power applications, providing efficient energy storage and transfer capabilities.
High nominal inductance of 100 uH allows for effective energy storage and regulation in power circuits.
With a high maximum operating temperature of 125°C, the inductor can withstand elevated temperatures in demanding environments.
Capable of handling a maximum rated current of 0.56 A, ensuring reliable performance under varying load conditions.
Low DC resistance of 0.7 ohm minimizes power loss and heat generation, improving overall efficiency.
Ferrite core material provides high magnetic permeability and low core losses, contributing to improved inductor performance.
Fixed Inductors B82472G4104M000 attributes and parameters. Explore more Fixed Inductors devices from TDK
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
B82472G4104M000 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SPC TECHNOLOGY/ MULTICOMP
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PE-0402CD400KTG
Pulse Electronics
PE-0402CD400KTG by Pulse Electronics is a chip inductor with 0.04 uH nominal inductance, 250 MHz test frequency, and 10% tolerance. Ideal for RF applications due to its 2240 MHz self-resonance frequency and dual-ended terminal placement. Suitable for SMT mounting with gold finish terminals.
IHLP4040DZER101M11
Vishay Intertechnology's IHLP4040DZER101M11 is a shielded, surface mount fixed inductor with 100uH nominal inductance and 2.5A max rated current. Ideal for high current applications, this rectangular package inductor has a DC resistance of 0.27 ohm and operates b/w -55°C to 125°C temperature range.
5712
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 1;
#FSLB2520-470K
Toko
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; DC Resistance: 5.4 ohm;
XGL4020-222MEC
Coilcraft
Coilcraft XGL4020-222MEC is a shielded, surface mount inductor with 2.2uH nominal inductance and 8.9A max rated current. Ideal for power applications, it has a rectangular package measuring 4mm x 4mm x 2.1mm and operates b/w -40°C to 125°C.
DRA124-8R2-R
Eaton Corporation
DRA124-8R2-R by Eaton Corp is a shielded fixed inductor with 8.2uH nominal inductance, ideal for general purpose applications. With a max operating temp of 165°C and rated current of 6.7A, it offers reliable performance in various electronic circuits requiring high-quality components.
CTX100-1-52LP-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 20 %;
LQG15HN2N2S02D
Murata Manufacturing
Murata Manufacturing's LQG15HN2N2S02D is a 0402-sized fixed inductor with 0.0022 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and matte tin finish, it operates b/w -55 to 125 °C with max current of 0.9 A. With self-resonance frequency at 6000 MHz and quality factor of 8, it is a general-purpose chip inductor ideal for compact SMT designs.
7447709004
Wuerth Elektronik & Kg
Wurth Elektronik 7447709004 is a shielded SMT inductor with 4.7uH nominal inductance, ideal for power applications. It has a max rated current of 9.3A and operates b/w -40 to 125°C, featuring a nickel-zinc core material and wraparound terminals.
LPS4018-103MRB
Coilcraft's LPS4018-103MRB is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.25A max rated current. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 40MHz.
B78108S1222K000
TDK
B78108S1222K000 by TDK is a 2.2uH general purpose inductor with 1A max current, 140MHz self-resonance freq, and -55 to 125°C operating temp range. Ideal for RF applications due to its high Q factor at 7.96MHz, this axial inductor features a tubular package design with tin finish terminals.
CB2012T100MR
Taiyo Yuden
CB2012T100MR by Taiyo Yuden is an 0805 fixed inductor with a nominal inductance of 10uH, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.65 ohm, making it ideal for general purpose use. With dual-ended terminals and wraparound shape, this SMT inductor offers reliable performance at a self-resonance frequency of 32MHz.
B82733F2142B001
TDK's B82733F2142B001 is a dual in-line fixed inductor with 27000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.4 A and operates b/w -40 to 125 °C, featuring a ferrite core and flat terminals. Ideal for PCB mounting, this general purpose inductor offers low DC resistance at 0.44 ohm.
ELGTEAR47NA
Panasonic
Panasonic ELGTEAR47NA is a shielded, surface mount fixed inductor with 0.47uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has dual-ended terminals, operates b/w -40 to 125 °C, and features a self-resonance frequency of 126 MHz.
LQW18CNR47J00D
Murata Manufacturing's LQW18CNR47J00D is a 0603 SMT inductor with 0.47uH nominal inductance, suitable for RF applications. It has a max rated current of 0.5A, self-resonance frequency of 555MHz, and operates b/w -40 to 85°C.
CTX100-2-52M-R
The Eaton Corporation CTX100-2-52M-R is a fixed inductor with 100uH nominal inductance, 4.4A max current, and -40 to 75°C operating temp range. Ideal for power applications, it features radial terminals, iron core material, and a toroidal package style.
B82731T2801A020
B82731T2801A020 by TDK is a dual in-line fixed inductor with 15000 uH nominal inductance, 0.8 A max rated current, and -40 to 125 °C operating temperature range. Ideal for power applications, this general purpose inductor features a rectangular package style for PCB mount with 4 terminals and flat terminal shape.
IFSC1111AZER4R7M01
Vishay Intertechnology's IFSC1111AZER4R7M01 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.17A max rated current. Ideal for high current applications, this general purpose inductor has a compact 1111 size code and operates b/w -55°C to 125°C temperatures.
DR74-101-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
5626
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 100 uH;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82471A1104K000
The TDK B82471A1104K000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.52A and operates b/w -55°C to 150°C. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
B82472-G4104-M
The TDK B82472-G4104-M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55 to 125 °C and has a max rated current of 0.56A. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
B82462A4473K000
The TDK B82462A4473K000 is a fixed inductor with 47uH nominal inductance, 0.64 ohm DC resistance, and 10% tolerance. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component operates b/w -55°C to 150°C with a max rated current of 0.54A.
B82476A1104M000
B82476A1104M000 by TDK is a surface mount fixed inductor with a nominal inductance of 100 uH and max rated current of 1.3 A. It is a general purpose inductor suitable for power applications, with a rectangular package measuring 12.95 mm in length, 9.4 mm in width, and 5.08 mm in height.
B82422-A1103-K100
Siemens
Siemens B82422-A1103-K100 is a surface mount fixed inductor with 10uH nominal inductance, 0.18A max current, and 1.6 ohm DC resistance. Ideal for RF applications due to its 25MHz self-resonance frequency and ferrite core material. Dual-ended terminals with J bend shape make it versatile for various circuit designs.
B82422A1103K100
The TDK B82422A1103K100 is a 10uH SMT inductor with 27 min Q factor, suitable for RF applications. It has a max operating temp of 150°C, 0.18A rated current, and self-resonance frequency of 25MHz. Ideal for general purpose use in automotive electronics due to AEC-Q200 compliance.
B82498F1472J000
The TDK B82498F1472J000 is a 0805 SMT fixed inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, DC resistance of 3.8 ohm, and self-resonance frequency of 210 MHz. Ideal for general purpose use due to its compact rectangular package design and high quality factor at nominal inductance.
B82479-A1104-M
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82472P6104M000
B82422A1102K100
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
B82422-A1102-K100
Siemens B82422-A1102-K100 is a surface mount RF inductor with 1uH nominal inductance, 0.38A max current, and 320MHz self-resonance frequency. Ideal for general purpose applications requiring high quality factor and low DC resistance.
B82464-G4103-M
B82462G4103M000
B82462G4103M000 by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.062 ohm and operates b/w -55°C to 150°C temperature range.
B82479A1105M000
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
B82498F3331J000
B82476A1103M000
B82476A1103M000 by TDK is a fixed inductor with 10uH nominal inductance, 3.9A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
B82422A1104K100
B82422-A1104-K100
Siemens B82422-A1104-K100 is a surface mount RF inductor with 100uH nominal inductance, 0.065A max current, and 27 min quality factor at 0.1MHz. It is a general purpose inductor with ferrite core, suitable for various applications requiring high-frequency performance.
B82432A1103K000
B82472G4103M000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved