Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3006P-1-102ZLF is a linear trimmer pot with 1000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
Median Price
$5.168
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
$6.030
100+ parts
$4.164
1k+ parts
$3.447
10k+ parts
-
Mouser Electronics
$6.100
$4.070
$3.050
$2.960
Element14
$4.190
$3.430
TTI
$3.960
$3.100
$3.010
Master Electronics
$3.660
$3.170
Verical
$4.306
Vyrian
Electro Sonic
$4.610
$3.500
$3.360
IBS Electronics
$5.133
$4.446
$4.222
Nova Conductors
VNN
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Aranea Global
Perfect Parts
Small diameter leads make this variable resistor easy to integrate into compact designs.
Having 15 turns allows for precise adjustment of resistance, providing fine tuning capabilities.
With a rated temperature of 70 °C, this variable resistor can operate effectively in a wide range of environments.
Horizontal orientation makes it convenient to adjust the resistance using the screw actuator easily.
Cermet technology offers high temperature stability and low noise, ensuring consistent performance over time.
Rectangular package shape provides efficient use of space and easy integration into circuits.
Linear resistance law ensures a proportional change in resistance with actuator movement, making it predictable and easy to control.
Trimmer pot construction allows for precise adjustment of resistance, providing customization options in circuits.
With a resistance value of 1000 ohm, this variable resistor can be used in a wide range of applications requiring specific resistance levels.
Having 3 terminals provides flexibility in circuit connections and applications.
PCB mount package style offers easy mounting on printed circuit boards, simplifying assembly and installation.
Wire terminal shape allows for secure and reliable connections in circuits.
High maximum operating temperature ensures reliability in a variety of operating conditions.
Low minimum operating temperature allows for use in extreme cold environments.
Low temperature coefficient of 100 ppm/°C ensures minimal resistance change with temperature variations.
Matte tin finish provides good conductivity and solderability for terminal connections.
Optimal length of leads for easy soldering and connection in circuits.
Compact height of package allows for space-efficient mounting in electronic devices or circuits.
Trimmer resistor type allows for fine adjustment of resistance for precise tuning in circuits.
Screw type actuator provides easy and accurate adjustment of resistance.
High operating voltage of 400 V makes this variable resistor suitable for a wide range of voltage applications.
10% tolerance ensures consistent performance and accuracy in resistance values.
Optimal package length for ease of mounting and integration into circuits.
Panel mount type allows for secure attachment to panels or control boards for easy access and adjustment.
With a rated power dissipation of 0.75 W, this variable resistor can handle moderate power levels without overheating.
Compact package width for efficient space utilization in circuit design.
High angle of rotation of 5400° allows for fine adjustment of resistance over a wide range.
Variable Resistors 3006P-1-102ZLF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3006P-1-102ZLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Assembly/Origin - Facility Transfer Jul/2012
PCN Packaging - 3006 Model Sept/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Loras Industries
Semiconductors
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Solid State Devices
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
TSM4YL201KR05
Vishay Intertechnology's TSM4YL201KR05 is a SMT trimmer resistor with 11 turns, linear resistance law, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in a compact surface-mount package. Operating temperature range from -55 to 155 °C with a max power dissipation of 0.25 W.
3302X-3-103E
Bourns
Bourns 3302X-3-103E is a linear trimmer pot with 10000 ohm resistance, 25% tolerance, and 260° rotation angle. Ideal for surface mount applications in electronic circuits due to its compact SMT package style and vertical actuator orientation. Operating temperature range from -40 to 85 °C makes it suitable for various electronic devices.
MW22B-10-10K
Eti Systems
POTENTIOMETER; JESD-609 Code: e4; Terminal Finish: GOLD; Manufacturer Series: MW22B;
67WR10KLF
Tt Electronics Plc
67WR10KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and max operating temperature of 125°C.
3006P-7-203LF
The Bourns 3006P-7-203LF is a linear trimmer pot with 20000 ohm resistance, rated for 0.75W power dissipation. It has a max operating temperature of 125°C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
89PHR2KLF
89PHR2KLF by Tt Electronics Plc is a TRIMMER resistor with 2000 ohm resistance, rated for 85-125 °C. It features CERMET technology, LINEAR resistance law, and SCREW actuator type. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
PV36W503C01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
23ESA104MMF50NF
TE Connectivity
TE Connectivity's 23ESA104MMF50NF is a linear carbon film potentiometer with 100k ohm resistance, 20% tolerance, and 0.4W power dissipation. It has a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise voltage control in electronic circuits.
3314J-1-504E
Bourns 3314J-1-504E is a CERMET variable resistor with 500000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 300V. Features screw actuator, 210° rotation angle, and compact SMT package.
3262W-1-502LF
Bourns 3262W-1-502LF is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating voltage up to 300 V. Features linear resistance law and 12 turns for precise adjustments.
PTC15LV02-103A2020
Amphenol
Amphenol's PTC15LV02-103A2020 is a CERMET POTENTIOMETER with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -40 to 90 °C. Ideal for PCB mounting applications requiring precise voltage control in a compact package.
P0915N-FC15BR10K
P0915N-FC15BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 300° angle of rotation. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery. The rectangular package with PCB mount style makes it suitable for panel mounting in various electronic devices.
PE30L0FG473KAB
Vishay Intertechnology's PE30L0FG473KAB is a CERMET POTENTIOMETER with 10% tolerance, 1.91W power dissipation, and 270° rotation angle. It operates b/w -55 to 125 °C and has a linear resistance law. Ideal for panel mount applications in electronic circuits requiring precise voltage control.
3296X-1-204LF
Bourns 3296X-1-204LF is a multi-turn cermet trimmer resistor with 200k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3006P-7-502LF
Bourns 3006P-7-502LF is a linear trimmer pot with 5000 ohm resistance, 15 turns, and 10% tolerance. Ideal for PCB mounting applications in temperature-sensitive environments with a wide operating range from -55 to 125 °C. Features screw actuator, CERMET technology, and matte tin finish for reliable performance.
3852A-282-502AL
Bourns 3852A-282-502AL is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2 W power dissipation. It has a linear law of resistance, operates b/w -1 to 125 °C, and offers a 250° angle of rotation. Ideal for panel mount applications in various electronic devices.
RJS12RE
Ohmite Manufacturing
Ohmite Manufacturing's RJS12RE is a 12 ohm POTENTIOMETER with LINEAR resistance law, 10% tolerance, and 50 W power dissipation. Featuring HORIZONTAL orientation, it has a CIRCULAR PACKAGE shape for PANEL MOUNT applications. The resistor has a SHAFT actuator type and 300° rotation angle for precise control in various electronic circuits.
SM-42TW10KOHM(103)
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW10KOHM(103) is a 10000 ohm linear trimmer resistor with 11 turns and 10% tolerance. It features a CERMET technology, operates b/w -65 to 150 °C, and has a rated power dissipation of 0.25 W. Ideal for surface mount applications in various electronic circuits requiring precise resistance adjustments.
KU1031S28
Nte Electronics
The Nte Electronics KU1031S28 is a 3500 ohm linear carbon potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates at temperatures ranging from -65 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
534B1501JC
Vishay Intertechnology's 534B1501JC is a 500 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. Operating voltage of 31.6 V, rated power dissipation of 2 W, and temperature coefficient of 20 ppm/°C make it ideal for precise control applications in electronics. Its panel mount package style with horizontal actuator orientation suits various industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
3006P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-203LF
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-502LF
Bourns 3006P-1-502LF is a CERMET POTENTIOMETER with 5000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications in various electronic devices. With a rated power dissipation of 0.75 W, it offers precise control over voltage levels up to 400 V.
3006Y-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-7-103LF
The Bourns 3006P-7-103LF is a linear trimmer pot with a resistance of 10k ohm, rated power dissipation of 0.75W, and an operating voltage of 400V. It is commonly used in PCB mount applications for precise resistance adjustment.
3006P-7-501LF
3006W-1-203LF
3006P-1-504LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-104LF
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
3006P-1-254LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved