Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3006P-1-504LF is a linear trimmer pot with 15 turns and resistance of 500k ohm. It has a rated power dissipation of 0.75W, operating voltage of 400V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact package.
Median Price
$1.835
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.630
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.850
$0.790
Farnell
$1.540
$1.100
Mouser Electronics
$1.780
$1.230
$1.020
$0.897
DigiKey
$1.890
$1.310
$1.086
$0.951
Newark
$1.920
$1.380
$1.150
$1.040
Distrelec
$1.991
$1.247
Bürklin Elektronik
$2.030
$1.600
RS Americas
$2.040
$1.630
$1.330
Element14
$2.590
$1.860
Arrow
$1.074
$1.033
TTI
Master Electronics
$1.186
$0.995
$0.871
Nova Conductors
$1.131
TEDSS.com
$0.780
TME
$1.160
$1.000
Vyrian
VNN
Amar Radio Corporation
Jameco Electronics
IBS Electronics
$2.108
$1.712
$1.625
LWI Electronics Inc
Electro Sonic
$1.009
$0.832
$0.804
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Inland Empire Components Inc.
LIBRA Elektronik GmbH
AZTECH Wire
$0.750
$0.730
$0.720
Netroflash
$1.109
Continental Prestige Electronics
$1.760
$0.860
$0.670
Allen Electronics Distributors
$2.008
$1.727
$1.586
Perfect Parts
Futuretech Components
S.R.D Solutions
Glotronic Ltd.
Authorized Procurement Solutions
GreenTree Electronics
Kepictronics
Cyclops Electronics Ltd (Excess)
Thin lead diameter allows for easy soldering and installation into circuits.
With 15 turns, this variable resistor provides precise control over resistance levels.
Suitable for use within a wide range of temperature environments.
Horizontal actuator orientation makes it easy to adjust and control the resistance.
Cermet technology ensures stability and reliability in resistance values over time.
Rectangular package design allows for easy mounting and integration into circuit boards.
Linear resistance provides smooth and predictable changes in resistance with adjustments.
Trimmer pot construction allows for easy adjustment of resistance levels.
High resistance value suitable for a variety of applications requiring precise resistance control.
Three terminals provide easy connectivity and integration into circuits.
PCB mount package style allows for easy installation on circuit boards.
Wire terminals provide sturdy connections and easy soldering.
Can operate at high temperatures without compromising performance.
Can operate at low temperatures without affecting performance.
Low temperature coefficient ensures stable resistance values over temperature changes.
Matte tin finish on terminals provides good conductivity and corrosion resistance.
Optimal lead length for easy installation and connectivity.
Compact height allows for space-saving installation in tight spaces.
Trimmer resistor type allows for easy adjustment of resistance levels for tuning circuits.
Screw actuator type provides precise control over adjustments to resistance levels.
High operating voltage capability suitable for a wide range of applications.
Tolerance of 10% ensures accuracy in resistance values for consistent performance.
Optimal package length for easy mounting and integration into circuits.
Through-hole mounting type provides secure installation on circuit boards.
With a power dissipation of 0.75 W, this resistor can handle moderate power loads.
Compact package width for space-saving installation on circuit boards.
Provides a wide angle of rotation for fine adjustments to resistance levels.
Variable Resistors 3006P-1-504LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3006P-1-504LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Assembly/Origin - Facility Transfer Jul/2012
PCN Packaging - 3006 Model Sept/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
261
Deltrol Controls
Other Relays;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Taiwan Semiconductor
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
89PHR200LF
Tt Electronics Plc
89PHR200LF by Tt Electronics Plc is a TRIMMER resistor with 200 ohm resistance, rated for 0.75 W power dissipation and 10% tolerance. It features CERMET technology, linear resistance law, and operates b/w -55 to 125 °C. Ideal for PCB mounting applications due to its RECTANGULAR PACKAGE shape and THROUGH HOLE MOUNTing type.
501-0010
Nte Electronics 501-0010 is a 2500 ohm linear carbon potentiometer with 3 terminals. It has a rated power dissipation of 2W, operating voltage of 500V, and can withstand temperatures from -65 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
3306F-1-102
Bourns
Bourns 3306F-1-102 is a linear trimmer resistor with 1000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It operates b/w -25 to 100 °C and has a temperature coefficient of 250 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
RV4LAYSA102A
Clarostat Sensors And Controls
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
64WR1KLF
64WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 1000 ohm resistance, 12 turns, and linear resistance law. It operates b/w -65 to 150 °C and has a rated power dissipation of 0.25 W. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
3296Z-1-502LF
Bourns 3296Z-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
PTA6044-2015DPA103
PTA6044-2015DPA103 by Bourns is a 10000 ohm POTENTIOMETER with VERTICAL orientation and CARBON technology. It has 6 terminals, rated for 150V operating voltage, and PCB Mount package style. Ideal for audio applications due to its AUDIO Law Of Resistance, this RECTANGULAR variable resistor offers a tolerance of 20% and operates b/w -10 to 50 °C temperatures.
91A1A-B28-A15L
The Bourns 91A1A-B28-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
89PHR20KLFTB
89PHR20KLFTB by Tt Electronics Plc is a CERMET trimmer resistor with 20000 ohm resistance, 20 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage levels with a max operating temperature of 125°C. The resistor features a screw actuator, matte tin terminal finish, and can handle up to 200V operating voltage.
T63YB103KT20
Vishay Intertechnology
Vishay Intertechnology's T63YB103KT20 is a 10000 ohm linear trimmer resistor with 13 turns, rated for temperatures b/w -55 to 155 °C. It features a CERMET technology in a rectangular package suitable for PCB mounting applications. The resistor has a tolerance of 10% and can operate at voltages up to 50 V, making it ideal for precise circuit adjustments.
RJS150
Ohmite Manufacturing
The Ohmite RJS150 is a 50W wire wound potentiometer with linear resistance law, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications, it features a circular construction, horizontal actuator orientation, and chassis mounting capability.
3006P-1-203LF
The Bourns 3006P-1-203LF is a CERMET potentiometer with 20000 ohm resistance, 15 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise voltage control.
M63P201KB40
Vishay Intertechnology's M63P201KB40 is a CERMET trimmer resistor with 200 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a temperature coefficient of 100 ppm/°C.
RV4NAYSD502A
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; No. of Turns: 1;
T93YA501KT20
Vishay Intertechnology's T93YA501KT20 is a 500 ohm linear trimmer resistor with 21 turns and 10% tolerance. It has a max operating temperature of 125°C, making it suitable for PCB mounting applications requiring precise resistance adjustments in electronic circuits. The rectangular package design with wire terminals and screw actuator offers easy installation and adjustment for optimal performance.
3362P-1-103LF
Bourns 3362P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in a compact rectangular package.
7-1879321-1
TE Connectivity
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 13.75mm x 11.7mm x 5.1mm;
72PR10KLFTB
72PR10KLFTB by Tt Electronics Plc is a linear trimmer resistor with 10% tolerance, operating voltage of 200V, and rated power dissipation of 0.5W. It is used in PCB mount applications for temperature-sensitive circuits due to its linear law of resistance and wide temperature range (-55 to 125 °C).
TW1250KA
TE Connectivity's TW1250KA is a 1W POTENTIOMETER with 10% Tolerance and 100 ppm/°C Temperature Coef. Its compact size of 23.5mm x 22.6mm makes it ideal for HORIZONTAL orientation applications in various electronic circuits.
3362X-1-105LF
Bourns 3362X-1-105LF is a linear trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw actuator allows precise adjustments in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3006P-7-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
3006P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-502LF
Bourns 3006P-1-502LF is a CERMET POTENTIOMETER with 5000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications in various electronic devices. With a rated power dissipation of 0.75 W, it offers precise control over voltage levels up to 400 V.
3006Y-1-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-502LF
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-7-103LF
The Bourns 3006P-7-103LF is a linear trimmer pot with a resistance of 10k ohm, rated power dissipation of 0.75W, and an operating voltage of 400V. It is commonly used in PCB mount applications for precise resistance adjustment.
3006P-7-501LF
3006W-1-203LF
3006P-7-104LF
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
3006P-1-254LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-504ZLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved