Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3006P-1-105LF is a CERMET trimmer pot with 15 turns, 1000000 ohm resistance, and linear law. It operates b/w -55 to 125 °C and has a rated power of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
Median Price
$1.902
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$0.582
100+ parts
$0.546
1k+ parts
-
10k+ parts
RS (Exports)
$1.820
Distrelec
$1.236
Newark
$1.920
$1.310
$1.160
RS Americas
$1.970
$1.580
$1.280
Element14
$2.068
$1.490
$1.179
Mouser Electronics
$2.130
$1.360
$1.130
$1.060
DigiKey
$2.200
$1.524
$1.262
$1.106
Farnell
$2.331
$1.421
$1.090
TTI Europe
$1.043
$0.989
$0.967
TTI
$1.030
Master Electronics
$1.890
$1.630
$1.590
Verical
$2.224
$1.918
Bürklin Elektronik
$1.530
$1.100
Chip1Stop
$0.763
TME
$1.660
$0.960
$0.880
Bristol Electronics
$1.950
Semtec, LLC
VNN
IBS Electronics
$1.618
$1.410
$1.273
Amar Radio Corporation
LIBRA Elektronik GmbH
Vyrian
Electro Sonic
$1.533
$1.151
$0.950
LWI Electronics Inc
Nova Conductors
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
ComSIT Distribution GmbH
Lonics
Prism Electronics
Aztec Data Supply Inc.
$0.162
Corohmni
$0.281
Decca Corp
$0.650
$0.637
$0.631
Kepictronics
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Futuretech Components
Perfect Parts
S.R.D Solutions
Continental Prestige Electronics
Glotronic Ltd.
Aranea Global
Argo Parts USA
Thin lead diameter allows for easy soldering and space-saving on PCBs.
Higher number of turns provides more precise adjustment of resistance.
Good temperature rating ensures stable performance in typical operating conditions.
Horizontal actuator orientation makes it easier to adjust and fine-tune the resistance value.
Cermet technology offers high stability, reliability, and precision in resistive elements.
Rectangular package design makes it easy to mount and integrate into circuit boards.
Linear resistance law ensures a consistent change in resistance with respect to actuator movement.
Trimmer pot construction allows for precise adjustment of resistance values.
Tube packing method provides easy storage and organization of components.
High resistance value suitable for a wide range of applications requiring precise resistance adjustment.
Having 3 terminals allows for easy connection and adjustment in circuit designs.
PCB mount package style enables easy integration onto printed circuit boards.
Wire terminal shape offers durability and ease of connection in circuit assemblies.
High maximum operating temperature ensures reliability and stability in diverse environmental conditions.
Low minimum operating temperature allows for use in a wide range of environmental conditions.
Low temperature coefficient ensures minimal drift in resistance value with temperature changes.
Matte tin terminal finish provides good conductivity and solderability.
Optimal lead length for easy installation and connection in circuit designs.
Suitable package height for space-efficient PCB mounting.
Trimmer resistor type allows for precise adjustment of resistance value.
Screw-type actuator offers tactile feedback and easy adjustment of resistance value.
High operating voltage rating suitable for various circuit applications.
10% tolerance provides a reasonable margin of error in resistance values.
Good package length for easy integration and mounting in circuit assemblies.
Through-hole mounting type offers secure and reliable attachment to PCBs.
High power dissipation rating allows for use in applications requiring higher power handling.
Optimal package width for space-efficient PCB integration.
Large angle of rotation allows for fine adjustment and precise control of resistance value.
Variable Resistors 3006P-1-105LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3006P-1-105LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Assembly/Origin - Facility Transfer Jul/2012
PCN Packaging - 3006 Model Sept/2013 Min/Mult Order Quantity Apr/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1554216002
Molex
WIRE AND CABLE;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Silicon Standard
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Daco Semiconductor
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
PT10MV10-103A2020-S
Piher Sensors And Controls Sa
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3214W-1-102E
Bourns
The Bourns 3214W-1-102E is a CERMET trimmer pot with linear resistance law, 1000 ohm resistance, and 5 turns. It is used in applications requiring precise voltage adjustments due to its high operating voltage of 300V and compact SMT package style. With an operating temperature range from -65°C to 150°C, it offers reliable performance in various electronic devices.
PA16NM103MAB15
Vishay Intertechnology's PA16NM103MAB15 is a 10000 ohm linear potentiometer with 3 terminals. It has a max operating temperature of 125 °C and tolerance of 20%. Ideal for panel mount applications, this circular package resistor features a knob actuator and sealed construction.
67WR200KLFTB
Tt Electronics Plc
67WR200KLFTB by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It is used in PCB mount applications with a max operating temperature of 125°C and an operating voltage of 200V. Ideal for precision adjustments in electronic circuits requiring a trimmer resistor with a tolerance of 10%.
3296Y-1-201LF
Bourns 3296Y-1-201LF is a 200 ohm, 25-turn linear trimmer resistor with CERMET technology. Operating voltage of 300V, rated power dissipation of 0.5W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. With through-hole mounting and vertical actuator orientation, it ensures reliable performance in various circuits.
25SR500KLF
25SR500KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 500000 ohm, suitable for PCB mounting. It has a linear law of resistance, operates b/w -55 to 125 °C, and can handle up to 300V. This trimmer resistor with screw actuator is ideal for applications requiring precise resistance adjustments in electronic circuits.
3296Z-1-501LF
Bourns 3296Z-1-501LF is a CERMET multi-turn trimmer resistor with 500 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
PV36W503C01B00
Murata Manufacturing
Murata Manufacturing's PV36W503C01B00 is a 50000 ohm TRIMMER resistor with 25 turns and linear resistance law. It has a max operating temperature of 125 °C and operates at 300 V, suitable for PCB mounting applications. The resistor features CERMET technology, vertical actuator orientation, and screw-type actuator design.
3296W-1-102
Bourns 3296W-1-102 is a 1000 ohm CERMET trimmer resistor with 25 turns and linear resistance law. It has a max operating temperature of 125°C, suitable for applications requiring precise resistance adjustments in electronic circuits. The through-hole mount package style makes it easy to install in various devices.
6639S-1102
Bourns 6639S-1102 is a 1000 ohm linear potentiometer with 15% tolerance, suitable for panel mount applications. Featuring conductive plastic technology, it has a rated power dissipation of 1W and operates b/w -40°C to 125°C. Its shaft actuator allows for a rotation angle of 340°, making it ideal for precise control in various electronic devices.
64WR5KLF
64WR5KLF by Tt Electronics Plc is a CERMET variable resistor with 5000 ohm resistance, rated for 85-150 °C. It features a linear law of resistance, 12 turns, and operates at an angle of rotation up to 4320°. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
3386P-1-101LF
Bourns 3386P-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 85°C to 125°C operating range and low temperature coefficient of 100 ppm/°C.
3352T-1-103LF
The Bourns 3352T-1-103LF is a linear variable resistor with a resistance of 10k ohm, rated for temperatures b/w -55°C and 125°C. It is commonly used in PCB mount applications where precise resistance adjustment is required.
73JA10K
Honeywell Sensing And Control
73JA10K by Honeywell Sensing And Control is a linear wire wound potentiometer with 10000 ohm resistance, 5% tolerance, and 2W power dissipation. It has a vertical actuator orientation, circular package shape, and shaft actuator type. Ideal for chassis mount applications with operating temperatures ranging from -40 to 120 °C.
PV37W104C01B00
Murata Manufacturing's PV37W104C01B00 is a 100k ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates at -55 to 125 °C, has a power dissipation of 0.25 W, and can handle up to 200 V. Ideal for PCB mounting applications requiring precise resistance adjustments in compact spaces.
3266W-1-501LF
Bourns 3266W-1-501LF is a 500 ohm, linear law, multi-turn trimmer resistor with 12 turns and CERMET technology. Operating voltage of 300V, rated power dissipation of 0.25W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. Suitable for through hole mounting with a vertical actuator type.
72PMR100KLF
72PMR100KLF by Tt Electronics Plc is a CERMET trimmer pot with linear resistance law, 100000 ohm resistance, and 10% tolerance. It is used in PCB mount applications for adjusting voltage levels with an operating range of -55 to 125 °C.
Y006910K0000J0L
Vishay Precision Group
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
3224W-1-101E
Bourns 3224W-1-101E is a 100 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates b/w -65 to 150 °C, ideal for surface mount applications requiring precise resistance adjustments in compact spaces. The cermet technology and screw actuator make it suitable for various electronic devices.
3329H-1-102LF
Bourns 3329H-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits due to its linear law of resistance and wide operating temperature range (-55 to 150 °C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3006P-7-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
3006P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-203LF
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-502LF
Bourns 3006P-1-502LF is a CERMET POTENTIOMETER with 5000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications in various electronic devices. With a rated power dissipation of 0.75 W, it offers precise control over voltage levels up to 400 V.
3006P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-7-501LF
3006P-7-104LF
3006P-7-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
3006Y-1-502LF
3006P-1-254LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006W-1-201LF
3006W-1-504LF
The Bourns 3006W-1-504LF is a linear trimmer pot with 15 turns and resistance of 500k ohm. It has a rated power dissipation of 0.75W, operating voltage of 400V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-1-103ZLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-101
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved