Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Median Price
$1.670
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Newark
1+ parts
$1.150
100+ parts
$1.050
1k+ parts
$0.970
10k+ parts
Farnell
$1.410
$1.040
-
RS (Exports)
Mouser Electronics
$1.690
$1.240
$0.998
$0.898
DigiKey
$1.780
$1.236
$1.024
$0.897
Bürklin Elektronik
$2.030
$1.600
$1.380
RS Americas
$2.100
$1.790
Distrelec
$2.104
$1.299
Element14
$2.380
$1.760
Chip1Stop
$2.410
$1.000
$0.906
TTI Europe
$1.149
$0.870
$0.859
Arrow
$1.072
$0.964
$0.912
Verical
$1.074
$0.966
$0.914
TTI
$1.030
$0.900
Master Electronics
$1.204
$0.908
Nova Conductors
$1.168
Rapid Electronics
$1.757
$1.179
TME
$2.130
$1.500
$1.360
Chip Stock
LWI Electronics Inc
Electro Sonic
$1.143
$0.909
$0.891
VNN
IBS Electronics
$1.689
$1.355
$1.273
Vyrian
NAC Semi
$1.560
Amar Radio Corporation
Inland Empire Components Inc.
Rebound Electronics
Resion
Cyclops Electronics Ltd
SPM Sales
Holdelec - ElecDif-Pro
Zilex Electronics Inc.
Mil-Aero Solutions, Inc.
ComSIT Distribution GmbH
Semicontronic
$0.780
$0.760
$0.757
Argo Parts USA
Bastille Electronics
$1.110
$1.054
Continental Prestige Electronics
$1.940
$1.070
Allen Electronics Distributors
$2.120
$2.040
Perfect Parts
Authorized Procurement Solutions
Eastek
Abacus Technologies
Kepictronics
iodParts Technologies Inc.
GreenTree Electronics
Formix International (Excess)
0.51 mm - Small diameter leads make this resistor easy to solder onto a PCB, saving space.
15 - With 15 turns, this variable resistor allows for precise adjustments to resistance.
70 °C - Rated for temperatures up to 70°C, suitable for a wide range of applications.
HORIZONTAL - Horizontal actuator orientation makes it easy to adjust the resistor in tight spaces.
CERMET - CERMET technology ensures high stability and reliability in variable resistors.
RECTANGULAR PACKAGE - Rectangular package shape provides easy installation on PCBs.
LINEAR - Linear resistance makes it easy to predict the change in resistance with an adjustment.
Trimmer Pot - Trimmer pot construction allows for precise adjustments to resistance levels.
TUBE - Packed in a tube for easy organization and storage.
7519 - Size code 7519 indicates the dimensions and specifications of the resistor.
50000 ohm - 50,000 ohms of resistance allows for a wide range of resistance adjustments.
3 - Three terminals provide flexibility in circuit connections.
PCB Mount - PCB mount package style allows for easy installation on circuit boards.
WIRE - Wire terminals make it easy to connect and disconnect the resistor from a circuit.
125 °C - With a maximum operating temperature of 125°C, this resistor can withstand high temperatures.
55 °C - Able to operate in low temperatures down to -55°C, suitable for diverse environments.
100 - Temperature coefficient of 100 ppm/°C ensures stable resistance values over temperature changes.
MATTE TIN - Matte tin terminal finish provides good solderability for easy installation.
5.33 mm - 5.33 mm lead length provides flexibility in positioning the resistor on a PCB.
6.35 mm - 6.35 mm package height allows for compact placement on circuit boards.
TRIMMER - Trimmer resistor type allows for adjustment of resistance levels.
SCREW - Screw type actuator ensures easy and precise adjustments to resistance.
400 V - Rated for an operating voltage of 400V, suitable for various electronic applications.
10 % - 10% tolerance means the resistor's actual resistance will be within 10% of the stated value.
19.05 mm - 19.05 mm package length provides a compact and easy-to-install design.
THROUGH HOLE MOUNT - Through-hole mounting type allows for secure and stable installation on circuit boards.
0.75 W - Rated for power dissipation of 0.75W, suitable for medium power applications.
4.83 mm - 4.83 mm package width provides a compact footprint on circuit boards.
5400° - With a rotation angle of 5400°, this variable resistor allows for fine adjustments to resistance levels.
Variable Resistors 3006P-1-503LF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3006P-1-503LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
World Products
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Loras Industries
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
T93YA104KT20
Vishay Intertechnology
Vishay Intertechnology's T93YA104KT20 is a 100k ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55°C to 125°C, suitable for PCB mounting applications requiring precise resistance adjustments up to 224V. The rectangular package measures 9.7mm x 5mm x 9.8mm, making it ideal for through-hole mounting in various electronic devices.
89PHR10K
Tt Electronics Plc
89PHR10K by Tt Electronics Plc is a CERMET trimmer pot with 10000 ohm resistance, 20 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
RRS500E
Ohmite Manufacturing
Ohmite Manufacturing's RRS500E is a 500 ohm linear wire wound potentiometer with 3 lug terminals. It has a rated power dissipation of 500W, diameter of 203.2mm, and length of 53.98mm. Ideal for panel mount applications requiring precise resistance adjustments in electrical circuits.
P13LFL103MAB10
Vishay Intertechnology's P13LFL103MAB10 is a linear 10000 ohm potentiometer with 3 terminals. It has a rated power dissipation of 1.5W, operating voltage of 122.5V, and temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact cylindrical package.
89PR10KLF
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
T93XB103KT20
Vishay Sfernice
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 10 %;
3386W-1-104LF
Bourns
Bourns 3386W-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
PT6KV-502A2020
Amphenol
Amphenol's PT6KV-502A2020 is a 5000 ohm linear trimmer resistor with 20% tolerance, suitable for PCB mounting. It operates at temperatures ranging from -25 to 70 °C and has a power dissipation of 0.1 W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
PS60-10MC1BR5K
PS60-10MC1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. It is designed for PCB mounting applications requiring a vertical slide actuator in through-hole mount construction.
3543S-1-202L
Bourns 3543S-1-202L is a 2000 ohm linear wire wound potentiometer with 3 turns, 5% tolerance, and 1W power dissipation. It has a circular package with a diameter of 22.23mm and length of 19.05mm, suitable for chassis mount applications in various electronic devices operating b/w -40°C to +125°C.
P11A2V0FGSY00103MA
Vishay Intertechnology's P11A2V0FGSY00103MA is a 10000 ohm POTENTIOMETER with 20% Tolerance, 270° Angle Of Rotation. It operates b/w -55 to 125 °C, with a Max Operating Voltage of 79.7 V. Ideal for Panel Mount applications due to its Modular Construction and Tin Terminal Finish.
3386F-1-503TLF
Bourns 3386F-1-503TLF is a linear cermet trimmer resistor with 50000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its wide operating range from -55 to 125 °C. Features vertical actuator orientation and knob type for precise adjustments.
51CAD-E24-B18L
The Bourns 51CAD-E24-B18L is a linear conductive plastic potentiometer with 50000 ohm resistance, suitable for PCB mounting. It has a temperature coefficient of 1000 ppm/°C and operates b/w 1-125 °C. Ideal for applications requiring precise resistance adjustment in compact spaces.
3386H-1-102LF
Bourns 3386H-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3266X-1-202LF
The Bourns 3266X-1-202LF is a CERMET variable resistor with 12 turns and linear resistance law. It has a resistance of 2000 ohms, rated power dissipation of 0.25W, and operates b/w -55 to 150 °C. Ideal for applications requiring precise voltage control in electronic circuits.
51AAD-B24-A15L
The Bourns 51AAD-B24-A15L is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to +125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
72XR10KLF
72XR10KLF by Tt Electronics Plc is a CERMET trimmer pot with 10000 ohm resistance, 3 terminals, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
RK2711120026
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
89PHR5KLF
89PHR5KLF by Tt Electronics Plc is a CERMET variable resistor with 5000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance, through-hole mounting style, and operates at a max voltage of 200 V. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
3299Z-1-502LF
The Bourns 3299Z-1-502LF is a CERMET trimmer pot with 5000 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3006P-7-203LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-103LF
Bourns 3006P-1-103LF is a linear trimmer pot with 10000 ohm resistance, 15 turns, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.75 W. Ideal for PCB mounting in applications requiring precise resistance adjustments within a temperature range.
3006P-1-104LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-203LF
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-102LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-502LF
Bourns 3006P-1-502LF is a CERMET POTENTIOMETER with 5000 ohm resistance, 15 turns, and linear resistance law. It has a max operating temperature of 125 °C and is ideal for PCB mount applications in various electronic devices. With a rated power dissipation of 0.75 W, it offers precise control over voltage levels up to 400 V.
3006P-1-501LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-501LF
3006P-7-104LF
3006P-7-502LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-201LF
The Bourns 3006P-7-201LF is a CERMET variable resistor with a resistance of 200 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, has a max operating temperature of 125 °C, and can handle an operating voltage of up to 400 V.
3006Y-1-502LF
3006P-1-254LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-7-202LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-105LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-201LF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006W-1-201LF
3006W-1-504LF
The Bourns 3006W-1-504LF is a linear trimmer pot with 15 turns and resistance of 500k ohm. It has a rated power dissipation of 0.75W, operating voltage of 400V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3006P-1-103ZLF
TRIMMER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3006P-1-500ZLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved