Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse SS-6488-NF-A431 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 8 contacts, and COPPER ALLOY shell. It features SPLIT BOARD LOCK mounting option, 2.54mm PCB contact row spacing, and RIGHT ANGLE mounting style. Ideal for applications requiring TELECOM AND DATACOM connectivity in compact spaces.
Median Price
$1.141
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Element14
1+ parts
$0.960
100+ parts
-
1k+ parts
$0.591
10k+ parts
$0.586
Farnell
$1.070
$0.625
$0.571
$0.521
Mouser Electronics
$1.570
$1.170
$0.927
$0.867
DigiKey
$1.164
$1.009
$0.904
Newark
$1.900
$1.490
$1.130
Master Electronics
$0.822
$0.718
$0.678
Verical
$0.989
Encitech
EMSNET
Electro Sonic
$0.883
$0.702
$0.605
IBS Electronics
$1.153
$1.007
$0.966
Vyrian
ComSIT Distribution GmbH
Nova Conductors
Classic Components Corporation
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$0.390
Continental Prestige Electronics
$1.150
$0.775
$0.564
Aztec Data Supply Inc.
$8.480
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Bastille Electronics
The compact body length of 0.605 inch saves space and allows for efficient placement in tight areas.
The slim body width of 0.505 inch provides a sleek and streamlined design for the connector.
The depth of 0.815 inch offers sufficient room for components without adding unnecessary bulk.
Polyethylene insulator material provides reliable electrical insulation and ensures durability.
The split board lock mounting option offers secure attachment to PCBs for stable connections.
Nickel shell finish not only enhances the appearance but also provides corrosion resistance for long-lasting use.
Having 8 contacts allows for multiple connections and enhanced communication capabilities.
The board mounting type simplifies installation and ensures a secure fit on PCBs.
Female contact gender is commonly used in telecom and datacom applications, providing compatibility with various devices.
The right angle mounting style offers flexibility in orientation and allows for easy connections in confined spaces.
Telecom & Datacom Connectors SS-6488-NF-A431 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Shell Finish:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
SS-6488-NF-A431 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - PC000021 5/19/2023
PCN Assembly/Origin - Manufacturing Location 16/Feb/2018
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Surge Components
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
EU2B-YS3203C
Idec
ROTARY SWITCH;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SPC TECHNOLOGY/ MULTICOMP
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
67329-8020
Molex
Molex 67329-8020 USB connector features 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, with glass-filled polyamide insulator material and solder termination type. Offers durability of 1500 cycles and rated current of 1A for commercial reliability.
7499010441
Wuerth Elektronik & Kg
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; Mating Contact Finish: GOLD (30);
USB-RS232-WE-1800-BT_5.0
FTDI
USB-RS232-WE-1800-BT_5.0 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
1932391-2
TE Connectivity
TE Connectivity's 1932391-2 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and nickel-plated brass shell. It has 8 contacts, rated at 1.5A signal current, UL94V-0 flammability code, and operates b/w -40 to 85°C. Ideal for board and panel mounting in telecom/datacom applications.
48405-0003
Molex 48405-0003 USB connector has 9 contacts with tin finish, glass-filled polyethylene insulator, and nickel shell. Ideal for telecom/datacom applications, it features a right-angle mounting style on board with female contact gender and solder termination.
47642-0001
Molex 47642-0001 USB connector with gold finish, liquid crystal polymer insulator, and flash plating. Ideal for telecom/datacom applications with 5 contacts, right-angle mounting, and surface mount termination. Operating temperature range from -30 to 85°C ensures reliability in commercial settings.
47080-4005
Molex 47080-4005 is a telecom & datacom connector with 0.05" mating contact pitch, 0.691" body length, and 0.23" body width. It features tin termination finish with nickel barrier, UL 94V-0 flammability code, and 15u plating thickness. Ideal for board mounting applications in commercial reliability environments.
6339160-1
TE Connectivity 6339160-1 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, rated at 1.5A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring high insulation resistance of 500MOhm.
5520259-4
TE Connectivity 5520259-4 is a Telecom & Datacom Connector with 0.715" body length, 0.63" width, and 0.65" depth. It has 500M ohm insulation resistance, PBT-POLYESTER insulator material, and operates b/w -40°C to 85°C. Ideal for telecom/datacom applications due to its UL-rated design, polarized housing, and solder termination.
1932055-1
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
HR911105A
Hanrun Electronics
HR911105A by Hanrun Electronics is a Telecom & Datacom Connector with 8 contacts, female gender, and right angle mounting style. It is used for board mounting with solder termination in telecom and datacom applications.
56579-0576
The Molex 56579-0576 is a USB connector with gold termination, glass-filled polyphthalamide insulator, and copper alloy contacts. It has a durability of 5000 cycles and operates b/w -20 to 85°C. Ideal for telecom & datacom applications, featuring a polarized housing and rated current of 1A.
5520258-3
TE Connectivity 5520258-3 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500M ohm and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for telecom applications, it features a split board lock mounting option and solder termination type.
32-5958UL
Vertiv
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; IEC Conformity: NO; Termination Contact Finish: GOLD;
2170409-5
TE Connectivity's 2170409-5 is a Telecom & Datacom Connector with -55 to 105°C operating temp, UL 94V-0 flammability rating, and 40 contacts. It features press-fit termination, board mounting, and suits applications requiring a two-port connector for telecom and datacom systems.
USB-A-S-RA-TSMT-T/R
Adam Tech
USB-A-S-RA-TSMT-T/R by Adam Tech is a right-angle USB connector with 4 contacts. It features a dielectric voltage of 500VAC, insulation resistance of 1Gohm, and contact material made of brass. Ideal for telecom/datacom applications, this male connector has a surface mount termination type and operates b/w -20 to 60°C.
PX0845/A
Bulgin
Bulgin's PX0845/A USB connector features gold termination, polyamide6 insulator, and nickel shell finish. Ideal for telecom/datacom applications, with 4 contacts, solder termination, and steel shell material. Male contact gender suitable for board/panel mounting in 94V-0 UL flammability code environments.
47590-1001
47590-1001 by Molex is a USB connector with 5 contacts, made of brass and housed in a stainless steel shell. It has a liquid crystal polymer insulator and matte tin finish. This right-angle receptacle is commonly used in telecom and datacom applications for surface mount board mounting.
89485-8000
The Molex 89485-8000 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications, it offers a dielectric voltage of 750VAC and operates at temperatures up to 125°C. With a durability of 1500 cycles, this right-angle receptacle is suitable for board and panel mounting.
JXD0-0019NL
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS-641010-NF-K1
Bel Fuse
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
SS-6488S-A-NF-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 8; Body Width: .55 inch;
SS-6488S-A-NF-01-M07
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Pattern: RECTANGULAR;
SS-6488S-A-NF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .55 inch; Mounting Option-1: LOCKING;
SS-6488S-A-NF-1-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Material: NOT SPECIFIED;
SS-6466-NF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Total No. of Contacts: 6; Termination Contact Finish: GOLD;
SS-6488S-A-NF-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Terminal Length: .125 inch; Body Width: .55 inch;
SS-6488S-A-NF-K1
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
SS-6466-NF-A431
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Rated Current - Signal: 1.5 A;
SS-641010S-A-NF-RMK4R
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Contact Finish: NOT APPLICABLE; Body or Shell Style: JACK;
SS-641010S-A-NF-A111
Bel Fuse's SS-641010S-A-NF-A111 is a telecom and datacom connector with a body length of 0.635", width of 0.53", and depth of 0.722". It has an insulation resistance of 500MΩ, dielectric voltage withstand of 1000VAC, and can operate in temperatures ranging from -20°C to 85°C. This connector is commonly used in board-mounted applications for telecommunications and data communications.
SS-6488-NF
Bel Fuse SS-6488-NF is a Telecom & Datacom Connector with 8 contacts, 0.605"x.505"x.815" dimensions, and POLYETHYLENE insulator material. It features MATTE TIN finish, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code. Ideal for board mounting applications in telecom and datacom systems due to its right angle mounting style and solder termination type.
SS-6488-NF-50
Bel Fuse SS-6488-NF-50 is a Telecom & Datacom Connector with 0.605"x.505"x.815" dimensions, 50u plating thickness, and 2.54mm terminal pitch. It features POLYETHYLENE insulator material, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code. Ideal for commercial applications requiring a polarized housing, right angle mounting style, and solder termination for female contacts in a staggered PCB pattern.
SS-6466-NF-SJ
Bel Fuse's SS-6466-NF-SJ is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -20 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors with solder termination.
SS-6488-NF-A01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Termination Contact Finish: NOT APPLICABLE; Mounting Style: RIGHT ANGLE;
SS-6488S-A-PG4-BA
Bel Fuse SS-6488S-A-PG4-BA is a Telecom & Datacom Connector with 8 contacts, matte tin finish, and polyethylene insulator. It has a body size of 0.708" x 0.599" x 0.85" and operates b/w -20°C to 85°C. Ideal for board and panel mounting in telecom applications due to its right-angle mounting style and staggered PCB contact pattern.
SS-6444-FLS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Total No. of Contacts: 4;
SS-640810-A-NF-A111
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Termination Type: SOLDER;
SS-641010S-A-NF-RMK4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; UL Flammability Code: 94V-0;
SS-6488-NF-A62
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; DIN Conformance: NO; Body Width: .505 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved