Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse SS-641010S-A-NF-RMK4R is a 10-contact telecom & datacom connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and NICKEL/TIN shell finish. It features 30u plating thickness, UL 94V-0 flammability code, and 1.5A signal current rating for board mounting applications requiring reliable right-angle female connectors with staggered PCB contact pattern.
Median Price
$2.387
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
$2.109
10k+ parts
$1.890
Nova Conductors
$1.943
Vyrian
Cogito LLC
PC Components Company LLC
Bristol Electronics
Electronics Depot
ACDS - Activité Composants Distribution Service
Argo Parts USA
Continental Prestige Electronics
$1.905
Netroflash
Ampacity Inc.
$2.030
AZTECH Wire
$11.427
Compact body length allows for space-saving design in telecom and datacom applications.
Polyethylene insulator material provides good electrical insulation and mechanical strength.
Thick plating thickness ensures durability and reliability in signal transmission.
UL 94V-0 flammability rating ensures high fire resistance and safety.
Having 10 contacts allows for multiple connections in one connector, offering versatility in applications.
Right angle mounting style enables easy installation and reduces strain on cables.
The terminal length provides a secure connection in the soldering process.
Solder termination ensures a strong and reliable electrical connection.
Female contacts are generally used for receiving pins, providing compatibility with various devices.
Jack style body or shell offers easy insertion and removal of connectors.
Telecom & Datacom Connectors SS-641010S-A-NF-RMK4R attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
SS-641010S-A-NF-RMK4R Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - PC000022 5/19/2023
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Onsemi
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
UX60SC-MB-5S8
Hirose Electric
The Hirose Electric UX60SC-MB-5S8 is a USB connector with 5 contacts, rated for 1A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom applications. With a durable design lasting up to 5000 cycles, it is ideal for board mounting in datacom systems.
73725-0110BLF
Amphenol Communications Solutions
Amphenol 73725-0110BLF USB connector has 0.584" body width, 0.776" depth, and 4 contacts. Ideal for telecom/datacom applications with POLYETHYLENE insulator material and TIN shell finish. Features right angle mounting style, solder termination type, and UL 94V-0 flammability code.
HFJ11-1G02ERL
Halo Electronics
HFJ11-1G02ERL by Halo Electronics is a telecom & datacom connector with 8 contacts, 2 PCB rows, and dielectric voltage of 2100VAC. It has a right-angle mounting style, solder termination type, and operates b/w 0 to 70°C. Ideal for telecommunications and data communication applications.
500075-0517
Molex
The Molex 500075-0517 USB connector features TIN over nickel termination, glass-filled plastic insulator, and copper alloy contacts. Ideal for telecom & datacom applications, this female receptacle has a total of 5 contacts and is mounted on a board using solder termination.
0473460001
Molex 0473460001 is a USB connector with 5 contacts, POLYETHYLENE insulator, and FEMALE contact gender. Ideal for telecom/datacom applications, it features SURFACE MOUNT termination on BOARD mounting in a RIGHT ANGLE style.
5-554720-3
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Termination Type: IDC; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
241007
Lumberg Connect
The Lumberg Connect 241007 USB connector features a body length of 0.472", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for telecom applications, this male plug connector with solderable retention clips offers reliable signal current of 1A in a right-angle mounting style.
5787394-7
TE Connectivity
TE Connectivity 5787394-7 is a telecom & datacom connector with 68 contacts, 0.05" mating pitch, and EMI shielding. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
2130830005
TELECOM AND DATACOM CONNECTOR;
5552740-1
TE Connectivity's 5552740-1 is a Telecom & Datacom Connector with 24 contacts, 0.085" mating pitch, and 105°C max operating temp. Ideal for board mounting applications in telecom and datacom systems due to its female contact gender, right angle receptacle body style, and solder termination type.
10136-6000EC
3m Electronic Products Division
10136-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
ZX62R-B-5P(30)
ZX62R-B-5P(30) by Hirose Electric is a USB connector with 5 contacts, gold finish with nickel barrier, and liquid crystal polymer insulator. It is used in telecom & datacom applications for board and panel mounting due to its stainless steel shell and right-angle mounting style.
1054550101
Molex 1054550101 USB connector features thermoplastic insulator, nickel shell finish, and 24 contacts. With a rated current of 5A, it is ideal for telecom & datacom applications. The right-angle mounting style and USB 3.1 C contact make it suitable for board mounting with a terminal pitch of 0.5mm.
MDSM-9SC-Z11-VS1
Itt Cannon
MDSM-9SC-Z11-VS1 by ITT Cannon is a Telecom & Datacom Connector with 9 contacts, rated at 2.5A signal current. It features a steel shell with nickel finish, polyethylene insulator, and crimp termination. Operating temperature ranges from -55°C to 125°C, making it suitable for various telecom and datacom applications requiring reliable connectivity in harsh environments.
USB4115-03-C
Global Connector Technology
USB4115-03-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features liquid crystal polymer insulation, matte tin over nickel termination finish, and stainless steel shell material. Ideal for telecom & datacom applications with -25 to 85°C operating temperature range.
43860-0010
Molex 43860-0010 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It has insulation resistance of 500MΩ, matte tin over nickel termination contact finish, and phosphor bronze contact material. Ideal for board mounting with hole option, this right-angle jack connector operates b/w -40°C to 85°C for signal current up to 1.5A in commercial applications.
GSB4111312HR
GSB4111312HR by Amphenol Communications Solutions is a USB connector with 9 contacts. It features a polyethylene insulator and a nickel shell finish. This right angle mounting style connector is commonly used in telecom and datacom applications.
2294415-1
TE Connectivity 2294415-1 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, 8 contacts, and 1.5A signal current rating. Ideal for board mounting applications in telecom and datacom systems.
555165-1
TE Connectivity's 555165-1 is a Telecom & Datacom Connector with 0.525" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a durable design with 750 cycles and solder termination for reliable performance in commercial settings.
692112030100
Wuerth Elektronik & Kg
692112030100 by Wurth Elektronik is a USB connector with a body length of 0.472", insulation resistance of 100M ohm, and dielectric voltage of 100VAC. It is ideal for telecom & datacom applications, featuring a surface mount termination type and durability of 5000 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS-641010-NF-K1
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
SS-6488S-A-NF-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 8; Body Width: .55 inch;
SS-6488S-A-NF-01-M07
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Pattern: RECTANGULAR;
SS-6488S-A-NF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Width: .55 inch; Mounting Option-1: LOCKING;
SS-6488S-A-NF-1-01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Contact Material: NOT SPECIFIED;
SS-6466-NF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Total No. of Contacts: 6; Termination Contact Finish: GOLD;
SS-6488S-A-NF-50
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Terminal Length: .125 inch; Body Width: .55 inch;
SS-6488S-A-NF-K1
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
SS-6466-NF-A431
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Rated Current - Signal: 1.5 A;
SS-641010S-A-NF-A111
Bel Fuse's SS-641010S-A-NF-A111 is a telecom and datacom connector with a body length of 0.635", width of 0.53", and depth of 0.722". It has an insulation resistance of 500MΩ, dielectric voltage withstand of 1000VAC, and can operate in temperatures ranging from -20°C to 85°C. This connector is commonly used in board-mounted applications for telecommunications and data communications.
SS-6488-NF-A431
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Style: RIGHT ANGLE; Terminal Pitch (mm): 2.54;
SS-6488-NF
Bel Fuse SS-6488-NF is a Telecom & Datacom Connector with 8 contacts, 0.605"x.505"x.815" dimensions, and POLYETHYLENE insulator material. It features MATTE TIN finish, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code. Ideal for board mounting applications in telecom and datacom systems due to its right angle mounting style and solder termination type.
SS-6488-NF-50
Bel Fuse SS-6488-NF-50 is a Telecom & Datacom Connector with 0.605"x.505"x.815" dimensions, 50u plating thickness, and 2.54mm terminal pitch. It features POLYETHYLENE insulator material, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code. Ideal for commercial applications requiring a polarized housing, right angle mounting style, and solder termination for female contacts in a staggered PCB pattern.
SS-6466-NF-SJ
Bel Fuse's SS-6466-NF-SJ is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -20 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors with solder termination.
SS-6488-NF-A01
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Termination Contact Finish: NOT APPLICABLE; Mounting Style: RIGHT ANGLE;
SS-6488S-A-PG4-BA
Bel Fuse SS-6488S-A-PG4-BA is a Telecom & Datacom Connector with 8 contacts, matte tin finish, and polyethylene insulator. It has a body size of 0.708" x 0.599" x 0.85" and operates b/w -20°C to 85°C. Ideal for board and panel mounting in telecom applications due to its right-angle mounting style and staggered PCB contact pattern.
SS-6444-FLS
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Total No. of Contacts: 4;
SS-640810-A-NF-A111
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; IEC Conformity: NO; Termination Type: SOLDER;
SS-641010S-A-NF-RMK4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; UL Flammability Code: 94V-0;
SS-641010S-A-NF
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved